How to Spec a Spacecraft or Launch-Vehicle Material: What to Send H-O for a Quote
The fastest way to a useful spacecraft material quote is to name the job and what the part sits near, not just ask for a material.
Outgassing and Contamination: Reading ASTM E595 TML and CVCM on a Spacecraft Material TDS
A sensor loses sensitivity in orbit, an optic hazes, and no one ever opened the enclosure.
Aerogel, MLI Film, or Graphite: Selecting Spacecraft and Launch-Vehicle Materials
Spacecraft and launch-vehicle materials answer three problems: moving heat off electronics with no air to carry it, insulating structure and feedlines across enormous temperature swings, and converting the thin film…
How to Spec a Missile or UAV Hardware Material: What to Send H-O for a Quote
The fastest way to a useful quote for missile or UAV hardware materials is to name the job and the environment, not just ask for a material.
High-Shock Electronics Cushioning: Why Shock and Vibration Need Different Foams
Defense electronics face two mechanical threats engineers often lump together: steady vibration, which an isolation mount tunes out, and shock, a single fast transient that surviving is about absorbing energy within the…
Thermal, Shock, and Aperture Sealing: Selecting Materials for Missile and UAV Hardware
Compact defense platforms concentrate several material problems into a small volume: shedding heat from dense electronics, cushioning those electronics against shock, and sealing antenna apertures without blocking the…
How to Spec an Aerospace GSE or MRO Consumable: What to Send H-O for a Quote
The fastest way to a useful consumable quote is to name the job and what the material touches, not just ask for a film or a foam.
Why Aerospace Gaskets Are Different
Aerospace gaskets differ fundamentally from standard industrial options. Strict compliance demands and harsh operational environments — from sub-zero altitudes to engine-adjacent heat zones — drive material choices that would be over-specified anywhere else.
Masking, Release, and Dunnage: The Consumable Selection Errors That Cost the Most
Process consumables rarely make a cost-reduction list, yet a wrong one can scrap a finished panel, a cured layup, or a whole shipment.