Acrylic Foam Tapes (AFTC)
AFTC 2510
AFTC 2510 is a 0.039" thick, single-sided conformable acrylic foam tape built on a closed cell acrylic core with a printable ionomer backing, designed for difficult sealing of joints and seams on irregular surfaces. It delivers 90° peel adhesion of 14 lb/in and operates across a temperature range of -40°F to 203°F. The ionomer backing is paintable, abrasion resistant, and UV resistant, supporting long-term performance in exposed exterior environments.
Key Properties
- 90° Peel Adhesion: 14 lb/in (ASTM D3330)
- Tensile Strength: 45 lb/in² (ASTM D3759)
- Temperature Resistance: -40°F to 203°F
- Carrier / Liner: Printable ionomer backing / PET release liner
- Total Tape Thickness: 0.039" ±10%
- Density: 56 lb/ft³
AFTC 2520
AFTC 2520 is a 0.079" thick, single-sided conformable acrylic foam tape built on a closed cell acrylic core with a printable ionomer backing, designed for demanding sealing applications on joints, seams, and irregular surfaces. It delivers 90° peel adhesion of 15 lb/in and operates across a temperature range of -40°F to 203°F. The ionomer backing is paintable and abrasion resistant, enabling use in applications where the tape must accept a topcoat or withstand surface wear.
Key Properties
- 90° Peel Adhesion: 15 lb/in (ASTM D3330)
- Tensile Strength: 45 lb/in² (ASTM D3759)
- Temperature Resistance: -40°F to 203°F
- Carrier / Liner: Printable ionomer backing / PET release liner
- Total Tape Thickness: 0.079" ±10%
- Density: 56 lb/ft³
AFTC 5004
AFTC 5004 is a 0.015" thick, double-sided closed cell acrylic foam tape in the SilverTape family, formulated for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 17 lb/in, dynamic shear strength of 93 lb/in², and tensile strength of 48 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and is suitable for pre-powder coating applications.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 93 lb/in² (ASTM D1002)
- Tensile Strength: 48 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.015" ±15%
AFTC 5319
AFTC 5319 is a double-sided, closed cell acrylic foam tape at 0.025" (±15%) thickness, formulated with Acrylic Coating 40 for bonding to high and medium surface energy substrates. It achieves a 90° peel adhesion of 19 lb/in, a dynamic shear strength of 96 lb/in², and a tensile strength of 100 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 52 lb/ft³.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 96 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.025" ±15%
AFTC 5326
AFTC 5326 is a double-sided, closed cell acrylic foam tape at 0.016" (±15%) thickness, formulated with Acrylic Coating 40 on a conformable acrylic foam core for bonding to high and medium surface energy substrates including PVC and ABS. It achieves a 90° peel adhesion of 18 lb/in, a dynamic shear strength of 102 lb/in², and a tensile strength of 97 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with excellent water resistance and no bi-metal corrosion. The tape is gray with a Red PE liner and a density of 52 lb/ft³.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 102 lb/in² (ASTM D1002)
- Tensile Strength: 97 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.016" ±15%
AFTC 5327
AFTC 5327 is a double-sided, closed cell acrylic foam tape at 0.015" (±15%) thickness, formulated with Acrylic Coating 40 for bonding to high and medium surface energy substrates. It achieves a 90° peel adhesion of 18 lb/in, a dynamic shear strength of 101 lb/in², and a tensile strength of 160 lb/in² — the highest tensile strength in the AFTC range. It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F. The tape is white with a Red PE liner and a density of 52 lb/ft³.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 101 lb/in² (ASTM D1002)
- Tensile Strength: 160 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.015" ±15%
AFTC 5332
AFTC 5332 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 50 adhesive system on both faces, available at 0.025" thickness. It is specifically designed for bonding a wide variety of medium and low surface energy plastic substrates — including ABS, ASA, EVA, PMMA, PS, PVC, and PC — and is capable of absorbing the differing thermal expansions of joined materials, which in plastics can be extremely high. The tape delivers a 90° peel adhesion of 20 lb/in, a tensile strength of 107 lb/in², and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 101 lb/in² (ASTM D1002)
- Tensile Strength: 107 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.025" ±15%
AFTC 5333
AFTC 5333 is a double-sided, closed cell acrylic foam tape at 0.025" (±15%) thickness, formulated with Acrylic Coating 40 for bonding to high and medium surface energy substrates. It achieves a 90° peel adhesion of 19 lb/in, a dynamic shear strength of 96 lb/in², and a tensile strength of 100 lb/in². It is rated for long-term temperature resistance to 212°F and a short-term resistance of 350°F — the highest short-term temperature rating in the AFTC range. The tape is white with a Red PE liner and a density of 54 lb/ft³.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 96 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 350°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.025" ±15%
AFTC 5335
AFTC 5335 is a double-sided, closed cell acrylic foam tape at 0.031" (±15%) thickness, formulated with Acrylic Coating 40 for bonding to high and medium surface energy substrates. It achieves a 90° peel adhesion of 13 lb/in, a dynamic shear strength of 63 lb/in², and a tensile strength of 92 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F. The tape is white with a Red PE liner and a density of 52 lb/ft³.
Key Properties
- 90° Peel Adhesion: 13 lb/in (ASTM D3330)
- Dynamic Shear Strength: 63 lb/in² (ASTM D1002)
- Tensile Strength: 92 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.031" ±15%
AFTC 5336
AFTC 5336 is a double-sided, closed cell acrylic foam tape at 0.025" (±15%) thickness, formulated with Acrylic Coating 40 on a conformable acrylic foam core for bonding to high and medium surface energy substrates including PVC and ABS. It achieves a 90° peel adhesion of 19 lb/in, a dynamic shear strength of 97 lb/in², and a tensile strength of 100 lb/in², with excellent water resistance and no bi-metal corrosion. It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F. The tape is gray with a Red PE liner, a density of 52 lb/ft³, a shelf life of 12 months, and a minimum recommended application temperature of 65°F.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 97 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.025" ±15%
AFTC 5339
AFTC 5339 is a double-sided, closed cell acrylic foam tape at 0.031" (±15%) thickness, formulated with Acrylic Coating 40 for bonding to high and medium surface energy substrates. It achieves a 90° peel adhesion of 21 lb/in, a dynamic shear strength of 93 lb/in², and a tensile strength of 92 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F. The tape is gray with a Bordeaux PE liner — the only 53-series grade in the AFTC range supplied with a Bordeaux liner — and a density of 52 lb/ft³.
Key Properties
- 90° Peel Adhesion: 21 lb/in (ASTM D3330)
- Dynamic Shear Strength: 93 lb/in² (ASTM D1002)
- Tensile Strength: 92 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Bordeaux PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.031" ±15%
AFTC 5341
AFTC 5341 is a double-sided, closed cell acrylic foam tape at 0.047" (±10%) thickness, formulated with Acrylic Coating 40 on a conformable acrylic foam core for bonding to high and medium surface energy substrates including PVC and ABS. It achieves a 90° peel adhesion of 23 lb/in, a dynamic shear strength of 86 lb/in², and a tensile strength of 86 lb/in², with excellent water resistance and no bi-metal corrosion. It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F. The tape is gray with a Red PE liner and a density of 52 lb/ft³.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 86 lb/in² (ASTM D1002)
- Tensile Strength: 86 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.047" ±10%
AFTC 5343
AFTC 5343 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 41 adhesive system on both faces, available at 0.047" thickness. It is specially designed for bonding high and medium energy substrates in low temperature ranges, delivering a 90° peel adhesion of 22 lb/in with very high initial tack, very good plasticizer resistance, and excellent end strength at temperatures below 0°C. The tape is rated for long-term service up to 212°F and short-term exposure up to 320°F, with dynamic and tensile shear strength of 85 lb/in².
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC 5345
AFTC 5345 is a double-sided, closed cell acrylic foam tape at 0.047" (±10%) thickness, formulated with Acrylic Coating 40 for bonding to high and medium surface energy substrates. It achieves a 90° peel adhesion of 23 lb/in, a dynamic shear strength of 85 lb/in², and a tensile strength of 85 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F. The tape is white with a Red PE liner, a density of 52 lb/ft³, and a static shear strength at 72°F of 1,500 grams — the highest 72°F static shear value in the AFTC range.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.047" ±10%
AFTC 5347
AFTC 5347 is a double-sided, closed cell acrylic foam tape at 0.047" (±10%) thickness, formulated with Acrylic Coating 40 for bonding to high and medium surface energy substrates. It achieves a 90° peel adhesion of 23 lb/in, a dynamic shear strength of 85 lb/in², and a tensile strength of 85 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 52 lb/ft³.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.047" ±10%
AFTC 5351
AFTC 5351 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 41 adhesive system on both faces, available at 0.047" thickness. It is specially designed for bonding high and medium energy substrates in low temperature ranges, delivering a 90° peel adhesion of 22 lb/in with very high initial tack, very good plasticizer resistance, and excellent end strength at temperatures below 0°C. The tape is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC 5352
AFTC 5352 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 50 adhesive system on both faces, available at 0.047" thickness. It is specifically designed for bonding a wide variety of medium and low surface energy plastic substrates — including ABS, ASA, EVA, PMMA, PS, PVC, and PC — and is capable of absorbing the differing thermal expansions of joined materials, which in plastics can be extremely high. The tape delivers a 90° peel adhesion of 26 lb/in and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 26 lb/in (ASTM D3330)
- Dynamic Shear Strength: 82 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC 5353
AFTC 5353 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 41 adhesive system on both faces, available at 0.062" thickness. It is specially designed for bonding high and medium energy substrates in low temperature ranges, delivering a 90° peel adhesion of 22 lb/in with very high initial tack, very good plasticizer resistance, and excellent end strength at temperatures below 0°C. The tape is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.062" ±10%
AFTC 5355
AFTC 5355 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.062" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 23 lb/in with very high initial tack and very good plasticizer resistance. The tape maintains high impact resistance below 0°C and is rated for long-term service up to 212°F and short-term exposure up to 320°F, with static shear strength retained at elevated temperatures up to 350°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.062" ±10%
AFTC 5356
AFTC 5356 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.062" thickness. It is designed for bonding high and medium energy substrates — including PVC, ABS, glass, steel, aluminum, and ceramics — with a 90° peel adhesion of 23 lb/in. The tape maintains high impact resistance below 0°C and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 80 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Conformable Acrylic Foam core
- Total Tape Thickness: 0.062" ±15%
AFTC 5357
AFTC 5357 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.062" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 23 lb/in with very high initial tack and very good plasticizer resistance. The tape maintains high impact resistance below 0°C and is rated for long-term service up to 212°F and short-term exposure up to 320°F, with static shear strength retained at elevated temperatures up to 350°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.062" ±10%
AFTC 5389
AFTC 5389 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.078" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 24 lb/in with very high initial tack and very good plasticizer resistance. The tape maintains high impact resistance below 0°C and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 24 lb/in (ASTM D3330)
- Dynamic Shear Strength: 66 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Bordeaux PE liner; Acrylic Adhesive Foam Core
AFTC 5390
AFTC 5390 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.078" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 24 lb/in with very high initial tack and very good plasticizer resistance. The tape maintains high impact resistance below 0°C and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 24 lb/in (ASTM D3330)
- Dynamic Shear Strength: 67 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Bordeaux PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.078" ±10%
AFTC 5391
AFTC 5391 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.090" thickness. It is designed for bonding high and medium energy substrates — including PVC, ABS, glass, steel, aluminum, and ceramics — with a 90° peel adhesion of 23 lb/in and very high initial tack. The tape maintains high impact resistance below 0°C and is rated for long-term service up to 212°F and short-term exposure up to 320°F, with UV, solvent, and water resistance all rated excellent.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 73 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Conformable Acrylic Foam core
- Total Tape Thickness: 0.090" ±10%
AFTC 5392
AFTC 5392 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.09" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 23 lb/in with very high initial tack and very good plasticizer resistance. The tape maintains high impact resistance below 0°C and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 72 lb/in² (ASTM D1002)
- Tensile Strength: 72 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.09" ±10%
AFTC 5393
AFTC 5393 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.09" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 23 lb/in with very high initial tack and very good plasticizer resistance. The tape maintains high impact resistance below 0°C and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 72 lb/in² (ASTM D1002)
- Tensile Strength: 72 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.09" ±10%
AFTC 5399
AFTC 5399 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.118" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 24 lb/in with very high initial tack. The tape is rated for long-term service up to 212°F and short-term exposure up to 320°F, with UV, solvent, and water resistance all rated excellent.
Key Properties
- 90° Peel Adhesion: 24 lb/in (ASTM D3330)
- Dynamic Shear Strength: 65 lb/in² (ASTM D1002)
- Tensile Strength: 71 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Conformable Acrylic core
- Total Tape Thickness: 0.118" ±10%
AFTC 6402
AFTC 6402 is a double sided, closed cell conformable acrylic foam tape with a permanent Acrylic LSE Coating 60 adhesive system on both faces, available at 0.008" thickness. It is specifically designed for bonding materials with high, medium, and low surface energy — including powder coatings, plastics, coated glass, ceramics, silicones, Teflon, PP, and PE — without requiring a primer or adhesion promoter. The tape delivers a 90° peel adhesion of 22 lb/in and a dynamic shear strength of 110 lb/in², and is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 110 lb/in² (ASTM D1002)
- Tensile Strength: 106 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.008" ±15%
AFTC 6404
AFTC 6404 is a double sided, closed cell acrylic foam tape with a permanent Acrylic LSE Coating 60 adhesive system on both faces, available at 0.016" thickness. It is specifically designed for bonding a wide variety of low surface energy materials — including powder coatings, plastics, coated glass, ceramics, silicones, Teflon, PP, and PE — without requiring a primer or adhesion promoter. The tape delivers a 90° peel adhesion of 15 lb/in, a dynamic shear strength of 107 lb/in², and a tensile strength of 105 lb/in², and is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 15 lb/in (ASTM D3330)
- Dynamic Shear Strength: 107 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.016" ±15%
AFTC 6406
AFTC 6406 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 60 adhesive system on both faces, available at 0.025" thickness. It is specifically designed for bonding a wide variety of low surface energy materials — including powder coatings, plastics, coated glass, ceramics, silicones, Teflon, PP, and PE — without requiring a primer or adhesion promoter. The tape delivers a 90° peel adhesion of 18 lb/in and a dynamic shear strength of 96 lb/in², and is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 96 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.025" ±15%
AFTC 6408
AFTC 6408 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 60 adhesive system on both faces, available at 0.031" thickness. It is specifically designed for bonding a wide variety of low surface energy materials — including powder coatings, plastics, coated glass, ceramics, silicones, Teflon, PP, and PE — without requiring a primer or adhesion promoter. The tape delivers a 90° peel adhesion of 20 lb/in and a dynamic shear strength of 98 lb/in², and is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 98 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.031" ±15%
AFTC 6411
AFTC 6411 is a double sided, closed cell highly conformable acrylic foam tape with a permanent Acrylic Coating 60 adhesive system on both faces, available at 0.047" thickness. It is designed for bonding a wide variety of high, medium, and low surface energy materials — including powder coatings, plastics, coated glass, ceramics, silicones, Teflon, PP, and PE — without requiring a primer or adhesion promoter. The tape delivers a 90° peel adhesion of 22 lb/in and a dynamic shear strength of 94 lb/in², and is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 94 lb/in² (ASTM D1002)
- Tensile Strength: 94 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC 6415
AFTC 6415 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 60 adhesive system on both faces, available at 0.059" thickness. It is specifically designed for bonding a wide variety of low surface energy materials — including powder coatings, plastics, coated glass, ceramics, silicones, Teflon, PP, and PE — without requiring a primer or adhesion promoter. The tape delivers a 90° peel adhesion of 23 lb/in and a dynamic shear strength of 89 lb/in², and is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 89 lb/in² (ASTM D1002)
- Tensile Strength: 88 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
AFTC 6420
AFTC 6420 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 60 adhesive system on both faces, available at 0.078" thickness. It is specifically designed for bonding a wide variety of low surface energy materials — including powder coatings, plastics, coated glass, ceramics, silicones, Teflon, PP, and PE — without requiring a primer or adhesion promoter. The tape delivers a 90° peel adhesion of 23 lb/in and a dynamic shear strength of 87 lb/in², and is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 87 lb/in² (ASTM D1002)
- Tensile Strength: 84 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.078" ±10%
AFTC 8402
AFTC 8402 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.09" thickness. It is designed for bonding high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is specifically recommended for more difficult-to-bond surfaces in modern electronic assembly applications. The tape delivers a 90° peel adhesion of 17 lb/in, a dynamic and tensile shear strength of 105 lb/in², and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 105 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.09" ±15%
AFTC 8403
AFTC 8403 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.09" thickness. It is designed for bonding high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — with excellent UV, aging, solvent, and high-temperature resistance rated from +100°C to +160°C. The tape delivers a 90° peel adhesion of 17 lb/in and an exceptional dynamic and tensile shear strength of 105 lb/in², with a long-term temperature resistance of 248°F and short-term resistance of 374°F.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 105 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 248°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.09" ±15%
AFTC 8404
AFTC 8404 is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.09" thickness. It is designed for bonding high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is specifically recommended for more difficult-to-bond surfaces in modern electronic assembly applications. The tape delivers a 90° peel adhesion of 17 lb/in, a dynamic shear strength of 99 lb/in², and a long-term temperature resistance of 248°F and short-term resistance of 374°F.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 99 lb/in² (ASTM D1002)
- Tensile Strength: 102 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 248°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.09" ±15%
AFTC AM1011HC
AFTC AM1011HC is a double coated, closed cell acrylic foam tape with a permanent Acrylic LSE Coating 95 adhesive system on both faces, available at 0.047" thickness. It is specifically engineered for excellent adhesion to low surface energy substrates — including medium and low surface energy plastics, powder coatings, clearcoats, and ceramic car paints — without requiring a primer or surface modification. The tape is rated for long-term service up to 176°F and short-term exposure up to 212°F, with UV, solvent, and water resistance all rated excellent.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 75 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 176°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC AM9404
AFTC AM9404 is a double-sided, closed cell acrylic foam tape at 0.016" (±15%) thickness, with a 90° peel adhesion of 14 lb/in and a dynamic shear strength of 92 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with a minimum temperature resistance of -40°F. The tape features Acrylic Coating 47 adhesive on both sides, an acrylic adhesive foam core, and a Bordeaux PE liner.
Key Properties
- 90° Peel Adhesion: 14 lb/in (ASTM D3330)
- Dynamic Shear Strength: 92 lb/in² (ASTM D1002)
- Tensile Strength: 107 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Bordeaux PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.016" ±15%
AFTC AM9406
AFTC AM9406 is a double-sided, closed cell acrylic foam tape at 0.025" (±15%) thickness, with a 90° peel adhesion of 17 lb/in and a dynamic shear strength of 96 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with a minimum temperature resistance of -40°F. The tape features Acrylic Coating 47 adhesive on both sides, an acrylic adhesive foam core, and a Bordeaux PE liner.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 96 lb/in² (ASTM D1002)
- Tensile Strength: 107 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Bordeaux PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.025" ±15%
AFTC AM9408
AFTC AM9408 is a double-sided, closed cell acrylic foam tape at 0.031" (±15%) thickness, with a 90° peel adhesion of 19 lb/in and a dynamic shear strength of 90 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with a minimum temperature resistance of -40°F. The tape features Acrylic Coating 47 adhesive on both sides, an acrylic adhesive foam core, and a Bordeaux PE liner.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 90 lb/in² (ASTM D1002)
- Tensile Strength: 92 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Bordeaux PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.031" ±15%
AFTC AM9412
AFTC AM9412 is a double-sided, closed cell acrylic foam tape at 0.047" (±10%) thickness, with a 90° peel adhesion of 20 lb/in and a dynamic shear strength of 85 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with a minimum temperature resistance of -40°F. The tape features Acrylic Coating 47 adhesive on both sides, an acrylic adhesive foam core, and a Bordeaux PE liner.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Bordeaux PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.047" ±10%
AFTC AM9416
AFTC AM9416 is a double-sided, closed cell acrylic foam tape at 0.062" (±10%) thickness — the thickest grade in the AFTC range — with a 90° peel adhesion of 22 lb/in and a dynamic shear strength of 79 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with a minimum temperature resistance of -40°F. The tape features Acrylic Coating 47 adhesive on both sides, an acrylic adhesive foam core, and a Bordeaux PE liner.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 79 lb/in² (ASTM D1002)
- Tensile Strength: 79 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Bordeaux PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.062" ±10%
AFTC AM9420
AFTC AM9420 is a double-sided, closed cell acrylic foam tape at 0.078" (±10%) thickness, with a 90° peel adhesion of 22 lb/in and a dynamic shear strength of 77 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with a minimum temperature resistance of -40°F. The tape features Acrylic Coating 47 adhesive on both sides, an acrylic adhesive foam core, and a Bordeaux PE liner.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 77 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Bordeaux PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.078" ±10%
AFTC AM9423
AFTC AM9423 is a double-sided, closed cell acrylic foam tape at 0.091" (±10%) thickness, with a 90° peel adhesion of 23 lb/in — the highest in the AFTC Acrylic Coating 47 range — and a dynamic shear strength of 71 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with a minimum temperature resistance of -40°F. The tape features Acrylic Coating 47 adhesive on both sides, an acrylic adhesive foam core, and a Bordeaux PE liner.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 71 lb/in² (ASTM D1002)
- Tensile Strength: 70 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Bordeaux PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.091" ±10%
AFTC AM9430
AFTC AM9430 is a double-sided, closed cell acrylic foam tape at 0.118" (±10%) thickness — the thickest grade in the AFTC range — with a 90° peel adhesion of 22 lb/in and a dynamic shear strength of 59 lb/in². It is rated for long-term temperature resistance to 212°F and short-term resistance to 320°F, with a minimum temperature resistance of -40°F. The tape features Acrylic Coating 47 adhesive on both sides, an acrylic adhesive foam core, and a Red PE liner. The tape is white in color.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 59 lb/in² (ASTM D1002)
- Tensile Strength: 66 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 212°F (long-term) / 320°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.118" ±10%
AFTC AM9604
AFTC AM9604 is a double-sided, closed cell acrylic foam tape at 0.016" (±15%) thickness, specifically formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 15 lb/in and a dynamic shear strength of 107 lb/in² — a high in the AFTC range. It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 15 lb/in (ASTM D3330)
- Dynamic Shear Strength: 107 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.016" ±15%
AFTC AM9606
AFTC AM9606 is a double-sided, closed cell acrylic foam tape at 0.025" (±15%) thickness, formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 16 lb/in and a dynamic shear strength of 104 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 104 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.025" ±15%
AFTC AM9608
AFTC AM9608 is a double-sided, closed cell acrylic foam tape at 0.031" (±15%) thickness, formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 18 lb/in and a dynamic shear strength of 97 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 97 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.031" ±15%
AFTC AM9611
AFTC AM9611 is a double-sided, closed cell acrylic foam tape at 0.047" (±10%) thickness, formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 26 lb/in and a dynamic shear strength of 103 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 26 lb/in (ASTM D3330)
- Dynamic Shear Strength: 103 lb/in² (ASTM D1002)
- Tensile Strength: 94 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.047" ±10%
AFTC AM9615
AFTC AM9615 is a double-sided, closed cell acrylic foam tape at 0.059" (±10%) thickness, formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 27 lb/in and a dynamic shear strength of 89 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is described on the TDS as low density and extremely conformable, and is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 27 lb/in (ASTM D3330)
- Dynamic Shear Strength: 89 lb/in² (ASTM D1002)
- Tensile Strength: 88 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.059" ±10%
AFTC AM9620
AFTC AM9620 is a double-sided, closed cell acrylic foam tape at 0.078" (±10%) thickness, formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 27 lb/in and a dynamic shear strength of 99 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 27 lb/in (ASTM D3330)
- Dynamic Shear Strength: 99 lb/in² (ASTM D1002)
- Tensile Strength: 84 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.078" ±10%
AFTC AM9623
AFTC AM9623 is a double-sided, closed cell acrylic foam tape at 0.09" (±10%) thickness, formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 27 lb/in and a dynamic shear strength of 97 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 27 lb/in (ASTM D3330)
- Dynamic Shear Strength: 97 lb/in² (ASTM D1002)
- Tensile Strength: 81 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.09" ±10%
AFTC AM9804
AFTC AM9804 is a double-sided, closed cell acrylic foam tape at 0.015" (±15%) thickness, formulated with Acrylic Coating 91 for primer-free adhesion to low surface energy substrates including PP, PP-EPDM, EPP, TPE, powder-coated surfaces, and automotive lacquers. It achieves a 90° peel adhesion of 13 lb/in and a dynamic shear strength of 127 lb/in² — the highest dynamic shear in the entire AFTC range. It is rated for long-term temperature resistance to 194°F and short-term resistance to 212°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 13 lb/in (ASTM D3330)
- Dynamic Shear Strength: 127 lb/in² (ASTM D1002)
- Tensile Strength: 104 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 212°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
AFTC AM9806
AFTC AM9806 is a double-sided, closed cell acrylic foam tape at 0.025" (±15%) thickness, formulated with Acrylic Coating 91 for primer-free adhesion to low surface energy substrates including PP, PP-EPDM, EPP, TPE, powder-coated surfaces, and automotive lacquers. It achieves a 90° peel adhesion of 15 lb/in and a dynamic shear strength of 112 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 15 lb/in (ASTM D3330)
- Dynamic Shear Strength: 112 lb/in² (ASTM D1002)
- Tensile Strength: 104 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.025" ±15%
AFTC AM9808
AFTC AM9808 is a double-sided, closed cell acrylic foam tape at 0.031" (±15%) thickness, formulated with Acrylic Coating 91 for primer-free adhesion to low surface energy substrates including PP, PP-EPDM, EPP, TPE, powder-coated surfaces, and automotive lacquers. It achieves a 90° peel adhesion of 16 lb/in and a dynamic shear strength of 112 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 112 lb/in² (ASTM D1002)
- Tensile Strength: 104 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.031" ±15%
AFTC AM9811
AFTC AM9811 is a double-sided, closed cell acrylic foam tape at 0.047" (±10%) thickness, formulated with Acrylic Coating 91 for primer-free adhesion to low surface energy substrates including PP, PP-EPDM, EPP, TPE, powder-coated surfaces, and automotive lacquers. It achieves a 90° peel adhesion of 21 lb/in and a dynamic shear strength of 103 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 21 lb/in (ASTM D3330)
- Dynamic Shear Strength: 103 lb/in² (ASTM D1002)
- Tensile Strength: 94 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.047" ±10%
AFTC AM9815
AFTC AM9815 is a double-sided, closed cell acrylic foam tape at 0.059" (±10%) thickness, formulated with Acrylic Coating 91 for primer-free adhesion to low surface energy substrates including PP, PP-EPDM, EPP, TPE, powder-coated surfaces, and automotive lacquers. It achieves a 90° peel adhesion of 20 lb/in and a dynamic shear strength of 100 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 100 lb/in² (ASTM D1002)
- Tensile Strength: 88 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.059" ±10%
AFTC AM9820
AFTC AM9820 is a double-sided, closed cell acrylic foam tape at 0.078" (±10%) thickness, formulated with Acrylic Coating 91 for primer-free adhesion to low surface energy substrates including PP, PP-EPDM, EPP, TPE, powder-coated surfaces, and automotive lacquers. It achieves a 90° peel adhesion of 20 lb/in and a dynamic shear strength of 99 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 37 lb/ft³.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 99 lb/in² (ASTM D1002)
- Tensile Strength: 84 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
AFTC AM9908
AFTC AM9908 is a 0.031" thick double-sided acrylic foam tape constructed with a coated acrylic foam core, Acrylic Coating 66 adhesive on both faces, and a red PE liner. Formulated specifically for automotive bonding applications on low surface energy (LSE) substrates including ceramics and silicones, it delivers a 90° peel adhesion of 24 lb/in — the highest in the AFTC series to date. The tape is rated for service from −40°F to 248°F short-term and 194°F long-term, with viscoelastic properties that absorb seam tension to support durable long-term bonds.
Key Properties
- 90° Peel Adhesion: 24 lb/in (ASTM D3330)
- Dynamic Shear Strength: 87 lb/in² (ASTM D1002)
- Tensile Strength: 109 lb/in² (ASTM D897)
- Static Shear Strength @ 72°F: 1,000 grams* (ASTM 3654)
- Long-Term Temperature Resistance: 194°F
- Total Tape Thickness: 0.031" ±15%
AFTC AM9911
AFTC AM9911 is a double-sided, closed cell acrylic foam tape at 0.047" (±10%) thickness, formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 27 lb/in and a dynamic shear strength of 84 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 35 lb/ft³.
Key Properties
- 90° Peel Adhesion: 27 lb/in (ASTM D3330)
- Dynamic Shear Strength: 84 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.047" ±10%
AFTC AM9915
AFTC AM9915 is a double-sided, closed cell acrylic foam tape at 0.059" (±10%) thickness, formulated with Acrylic Coating 66 for adhesion to low surface energy (LSE) substrates including ceramics, silicones, Teflon, powder coatings, and clearcoats. It achieves a 90° peel adhesion of 27 lb/in and a dynamic shear strength of 81 lb/in². It is rated for long-term temperature resistance to 194°F and short-term resistance to 248°F. The tape is black (gray core / black adhesive) with a Red PE liner and a density of 35 lb/ft³.
Key Properties
- 90° Peel Adhesion: 27 lb/in (ASTM D3330)
- Dynamic Shear Strength: 81 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Temperature Resistance: -40°F (min) / 194°F (long-term) / 248°F (short-term)
- Liner / Carrier: Red PE liner / Coated Acrylic Foam substrate
- Total Tape Thickness: 0.059" ±10%
AFTC HA7404
H-O Products AFTC HA7404 is a 0.016" thick double-sided acrylic foam tape with a dual adhesive construction: a heat-activated hotmelt film on one side and a pressure sensitive acrylic coating on the other. The hotmelt side forms a strong, permanent bond with extruded EPDM and TP seals when heat-activated, while the acrylic side delivers a 90° peel adhesion of 16 lb/in per ASTM D3330. The tape is rated for long-term temperature resistance to 212°F and short-term exposure to 320°F.
Key Properties
- 90° Peel Adhesion: 16 lb/in | ASTM D3330
- Dynamic Shear Strength: 94 lb/in² | ASTM D1002
- Tensile Strength: 107 lb/in² | ASTM D897
- Temperature Resistance: -40°F minimum, 212°F long-term, 320°F short-term
- Liner: Red PE liner
- Total Tape Thickness: 0.016" ±15%
AFTC HA7408
AFTC HA7408 is a 0.032" thick double-sided acrylic foam tape with a dual adhesive construction: a heat-activated hotmelt film on one side and a pressure sensitive acrylic coating on the other. The hotmelt side forms a strong, permanent bond with extruded EPDM and TP seals when heat-activated, while the acrylic side delivers a 90° peel adhesion of 16 lb/in per ASTM D3330. The tape is rated for long-term temperature resistance to 212°F and short-term exposure to 320°F.
Key Properties
- 90° Peel Adhesion: 16 lb/in | ASTM D3330
- Dynamic Shear Strength: 94 lb/in² | ASTM D1002
- Tensile Strength: 107 lb/in² | ASTM D897
- Temperature Resistance: -40°F minimum, 212°F long-term, 320°F short-term
- Liner: Red PE Liner
- Total Tape Thickness: 0.032" ±15%
AFTC HA7412
AFTC HA7412 is a 0.047" thick double-sided acrylic foam tape with a dual adhesive construction: a heat-activated hotmelt film on one side and a pressure sensitive acrylic coating on the other. The hotmelt side forms a strong, permanent bond with extruded EPDM and TP seals when heat-activated, while the acrylic side delivers a 90° peel adhesion of 24 lb/in per ASTM D3330. The tape is rated for long-term temperature resistance to 212°F and short-term exposure to 320°F.
Key Properties
- 90° Peel Adhesion: 24 lb/in | ASTM D3330
- Dynamic Shear Strength: 84 lb/in² | ASTM D1002
- Tensile Strength: 84 lb/in² | ASTM D897
- Temperature Resistance: -40°F minimum, 212°F long-term, 320°F short-term
- Liner: Red PE liner
- Total Tape Thickness: 0.047" ±15%
AFTC HA7604
AFTC HA7604 is a double sided, closed cell acrylic foam tape constructed with two distinct adhesive systems: one side uses Acrylic Coating 66 pressure sensitive adhesive for bonding to medium and low surface energy substrates, while the opposite side uses a Holtmelt Film that is inactive at ambient temperatures and activates via heat to fuse permanently with extruded EPDM or TP rubber seals. Available at 0.016" thickness, it delivers a 90° peel adhesion of 29 lb/in and an exceptional dynamic shear strength of 107 lb/in². The tape is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 29 lb/in (ASTM D3330)
- Dynamic Shear Strength: 107 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.016" ±15%
AFTC HA7608
AFTC HA7608 is a double sided, closed cell acrylic foam tape constructed with two distinct adhesive systems: one side uses Acrylic Coating 66 pressure sensitive adhesive for bonding to medium and low surface energy substrates, while the opposite side uses a Holtmelt Film that is inactive at ambient temperatures and activates via heat to fuse permanently with extruded EPDM or TP rubber seals. Available at 0.032" thickness, it delivers a 90° peel adhesion of 29 lb/in and a dynamic shear strength of 109 lb/in². The tape is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 29 lb/in (ASTM D3330)
- Dynamic Shear Strength: 109 lb/in² (ASTM D1002)
- Tensile Strength: 104 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.032" ±10%
AFTC HA7612
AFTC HA7612 is a double sided, closed cell acrylic foam tape constructed with two distinct adhesive systems: one side uses Acrylic Coating 66 pressure sensitive adhesive for bonding to medium and low surface energy substrates, while the opposite side uses a Holtmelt Film that is inactive at ambient temperatures and activates via heat to fuse permanently with extruded EPDM or TP rubber seals. Available at 0.047" thickness, it delivers a 90° peel adhesion of 28 lb/in and a dynamic shear strength of 107 lb/in², with UV, solvent, and water resistance all rated excellent. The tape is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 28 lb/in (ASTM D3330)
- Dynamic Shear Strength: 107 lb/in² (ASTM D1002)
- Tensile Strength: 94 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC HA7912
AFTC HA7912 is a double sided, closed cell acrylic foam tape constructed with two distinct adhesive systems: one side uses Acrylic Coating 66 pressure sensitive adhesive for bonding to medium and low surface energy substrates, while the opposite side uses a Holtmelt Film that is inactive at ambient temperatures and activates via heat to fuse permanently with extruded EPDM or TP rubber seals. Available at 0.047" thickness, it delivers a 90° peel adhesion of 26 lb/in and a tensile strength of 109 lb/in². The tape is rated for long-term service up to 194°F and short-term exposure up to 248°F.
Key Properties
- 90° Peel Adhesion: 26 lb/in (ASTM D3330)
- Dynamic Shear Strength: 103 lb/in² (ASTM D1002)
- Tensile Strength: 109 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 194°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC SC06B
AFTC SC06B is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.025" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 19 lb/in, a dynamic shear strength of 97 lb/in², and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 97 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.025" ±15%
AFTC SC06G
AFTC SC06G is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.025" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 19 lb/in, a dynamic shear strength of 97 lb/in², and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 97 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.025" ±10%
AFTC SC06W
AFTC SC06W is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.025" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 19 lb/in, a dynamic shear strength of 98 lb/in², and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 98 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
AFTC SC11B
AFTC SC11B is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.047" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 23 lb/in and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC SC11G
AFTC SC11G is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.047" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 22 lb/in and a static shear strength of 1,500 grams at 72°F, and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC SC11W
AFTC SC11W is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.047" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 23 lb/in, a static shear strength of 1,500 grams at 72°F, and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.047" ±10%
AFTC SC15B
AFTC SC15B is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.062" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 23 lb/in and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.062" ±10%
AFTC SC15G
AFTC SC15G is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.062" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 23 lb/in, static shear strength retained through 350°F, and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
AFTC SC15W
AFTC SC15W is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.062" thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 23 lb/in, static shear strength retained through 350°F, and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.062" ±10%
AFTC SGB
AFTC SGB is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.090" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 20 lb/in with very high initial tack, very good plasticizer resistance, and excellent water, UV, and solvent resistance. When used in combination with application advice, training, and possible audits, AFTC SGB is rated for warranty applications up to 25 years.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 75 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Conformable Acrylic Foam core
- Total Tape Thickness: 0.090" ±10%
AFTC SGG
AFTC SGG is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.090" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 20 lb/in with very high initial tack, very good plasticizer resistance, and excellent water, UV, and solvent resistance. When used in combination with application advice, training, and possible audits, AFTC SGG is rated for warranty applications up to 25 years.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 75 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Conformable Acrylic Foam core
- Total Tape Thickness: 0.090" ±10%
AFTC SGW
AFTC SGW is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.016" thickness. It is designed for bonding high and medium energy substrates — including plastics, glass, steel, aluminum, and ceramics — and delivers a 90° peel adhesion of 20 lb/in with very high initial tack and very good plasticizer resistance. When used in combination with application advice, training, and possible audits, AFTC SGW is rated for warranty applications up to 25 years. The tape is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 75 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.016" ±10%
AFTC 5004
AFTC 5004 is a 0.015" thick, double-sided closed cell acrylic foam tape in the SilverTape family, formulated for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 17 lb/in, dynamic shear strength of 93 lb/in², and tensile strength of 48 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and is suitable for pre-powder coating applications.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 93 lb/in² (ASTM D1002)
- Tensile Strength: 48 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.015" ±15%
AFTC 5005
AFTC 5005 is a 0.015" thick, double-sided closed cell acrylic foam tape in the SilverTape family, formulated for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 19 lb/in, dynamic shear strength of 76 lb/in², and tensile strength of 108 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is suitable for pre-powder coating applications and provides the strongest available bond on high surface energy substrates within its thickness class.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 76 lb/in² (ASTM D1002)
- Tensile Strength: 108 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.015" ±15%
AFTC 5008
AFTC 5008 is a 0.03" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 18 lb/in, dynamic shear strength of 94 lb/in², and tensile strength of 94 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and, on high surface energy substrates, provides the strongest bond the SilverTape family is able to produce.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 94 lb/in² (ASTM D1002)
- Tensile Strength: 94 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.03" ±15%
AFTC 5011
AFTC 5011 is a 0.047" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 22 lb/in, dynamic shear strength of 85 lb/in², and tensile strength of 85 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and provides the strongest bond the SilverTape family is able to produce on high surface energy substrates.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.047" ±10%
AFTC 5013
AFTC 5013 is a 0.047" thick, single-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding materials with high surface energy such as glass, aluminum, and steel. It delivers 90° peel adhesion of 22 lb/in, dynamic shear strength of 86 lb/in², and tensile strength of 86 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape's high density acrylic foam core is credited on the TDS for creating the strongest available bond on the correct high surface energy substrates.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 86 lb/in² (ASTM D1002)
- Tensile Strength: 86 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Coated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.047" ±10%
AFTC 5024
AFTC 5024 is a 0.062" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 21 lb/in, dynamic shear strength of 78 lb/in², and tensile strength of 78 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is suitable for pre-powder coating applications and is formulated to absorb differential thermal expansion between dissimilar bonded materials.
Key Properties
- 90° Peel Adhesion: 21 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.062" ±10%
AFTC 5032
AFTC 5032 is a 0.03" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high and medium surface energy — including transparent plastics, high and medium surface energy plastics, metals, and glass. It delivers 90° peel adhesion of 18 lb/in, dynamic shear strength of 80 lb/in², and tensile strength of 91 lb/in², and operates across a temperature range of -40°F to 212°F long-term and 320°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 80 lb/in² (ASTM D1002)
- Tensile Strength: 91 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.03" ±10%
AFTC 5046
AFTC 5046 is a 0.025" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 17 lb/in, dynamic shear strength of 84 lb/in², and tensile strength of 46 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and, on high surface energy substrates, provides the strongest bond the SilverTape family is able to produce.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 84 lb/in² (ASTM D1002)
- Tensile Strength: 46 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.025" ±15%
AFTC 5056
AFTC 5056 is a 0.062" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 21 lb/in, dynamic shear strength of 78 lb/in², and tensile strength of 78 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is suitable for pre-powder coating applications and is formulated to absorb differential thermal expansion between dissimilar bonded materials.
Key Properties
- 90° Peel Adhesion: 21 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.062" ±10%
AFTC 5091
AFTC 5091 is a 0.09" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high and medium surface energy. It delivers the highest 90° peel adhesion in this SilverTape thickness range at 23 lb/in, with dynamic shear strength of 73 lb/in² and tensile strength of 73 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 73 lb/in² (ASTM D1002)
- Tensile Strength: 73 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.09" ±10%
AFTC 5106
AFTC 5106 is a 0.024" thick, double-sided closed cell acrylic foam tape designed for removable bonding of high and medium surface energy materials. Due to its high density (65 lb/ft³), it can be removed from substrates without leaving a trace; peel adhesion is intentionally relatively low by design. It delivers dynamic shear strength of 90 lb/in² and tensile strength of 91 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 14 lb/in (ASTM D3330)
- Dynamic Shear Strength: 90 lb/in² (ASTM D1002)
- Tensile Strength: 91 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.024" ±15%
AFTC 5108
AFTC 5108 is a 0.031" thick, double-sided closed cell acrylic foam tape designed for removable bonding of high and medium surface energy materials. Due to its high density (65 lb/ft³), it can be removed from substrates without leaving a trace; peel adhesion is intentionally relatively low by design. It delivers dynamic shear strength of 84 lb/in² and tensile strength of 82 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 84 lb/in² (ASTM D1002)
- Tensile Strength: 82 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.031" ±15%
AFTC 5115
AFTC 5115 is a 0.059" thick, double-sided closed cell acrylic foam tape designed for removable bonding of high and medium surface energy materials. Due to its high density (65 lb/ft³), it can be removed from substrates without leaving a trace; peel adhesion is intentionally relatively low by design. It delivers the highest 90° peel adhesion in the 51xx series at 18 lb/in, dynamic shear strength of 82 lb/in², and tensile strength of 76 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 82 lb/in² (ASTM D1002)
- Tensile Strength: 76 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.059" ±15%
AFTC 5304
AFTC 5304 is a 0.015" thick, double-sided closed cell acrylic foam tape designed for bonding high and medium surface energy materials — including transparent plastics and glass — where a highly transparent bond is required and no stress corrosion may occur. It delivers 90° peel adhesion of 17 lb/in, dynamic shear strength of 88 lb/in², and tensile strength of 98 lb/in², and operates across a temperature range of -40°F to 212°F long-term and 320°F short-term. The tape's conformability enables full-surface, tension-free bonding of thin and structured materials; stress and tension on the bond must be avoided during application.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 88 lb/in² (ASTM D1002)
- Tensile Strength: 98 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.015" ±15%
AFTC 5305
AFTC 5305 is a 0.019" thick, double-sided closed cell acrylic foam tape specially designed for bonding high and medium surface energy substrates in low temperature ranges. It features very high initial tack and very good plasticizer resistance, and its excellent adaptability enables thin or textured surfaces to be bonded full surface and tension free. It delivers 90° peel adhesion of 17 lb/in, dynamic shear strength of 88 lb/in², and tensile strength of 99 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 88 lb/in² (ASTM D1002)
- Tensile Strength: 99 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Paper liner
- Total Tape Thickness: 0.019" ±15%
AFTC 5308
AFTC 5308 is a 0.03" thick, double-sided closed cell acrylic foam tape specially designed for bonding high and medium surface energy substrates in low temperature ranges. It features very high initial tack and very good plasticizer resistance, and its excellent adaptability enables thin or textured surfaces to be bonded full surface and tension free. It delivers 90° peel adhesion of 18 lb/in, dynamic shear strength of 80 lb/in², and tensile strength of 91 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 80 lb/in² (ASTM D1002)
- Tensile Strength: 91 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.03" ±10%
AFTC 5310
AFTC 5310 is a 0.039" thick, double-sided closed cell acrylic foam tape specially designed for bonding high and medium surface energy substrates in low temperature ranges. It features very high initial tack and very good plasticizer resistance, and its excellent adaptability enables thin or textured surfaces to be bonded full surface and tension free. It delivers 90° peel adhesion of 18 lb/in, dynamic shear strength of 75 lb/in², and tensile strength of 85 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 75 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.039" ±10%
AFTC 5312
AFTC 5312 is a 0.079" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high surface energy. It delivers 90° peel adhesion of 22 lb/in, dynamic shear strength of 78 lb/in², and tensile strength of 71 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and is cited on the TDS as a replacement for mechanical fasteners including rivets, screws, spot-welds, and liquid adhesives.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 71 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.079" ±10%
AFTC 5313
AFTC 5313 is a 0.078" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high surface energy. It delivers 90° peel adhesion of 22 lb/in, dynamic shear strength of 78 lb/in², and tensile strength of 71 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and, on high surface energy substrates, provides the strongest bond the SilverTape family is able to produce.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 78 lb/in² (ASTM D1002)
- Tensile Strength: 71 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.078" ±10%
AFTC 5315
AFTC 5315 is a 0.059" thick, double-sided closed cell acrylic foam tape specially designed for bonding high and medium surface energy substrates in low temperature ranges. It features very high initial tack and very good plasticizer resistance, and its excellent adaptability enables thin or textured surfaces to be bonded full surface and tension free. It delivers the highest 90° peel adhesion in the 53xx series at 20 lb/in, dynamic shear strength of 69 lb/in², and tensile strength of 78 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 20 lb/in (ASTM D3330)
- Dynamic Shear Strength: 69 lb/in² (ASTM D1002)
- Tensile Strength: 78 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.059" ±10%
AFTC 5320
AFTC 5320 is a 0.078" thick, double-sided closed cell acrylic foam tape specially designed for bonding high and medium surface energy substrates in low temperature ranges. It features very high initial tack and very good plasticizer resistance, and its excellent adaptability enables thin or textured surfaces to be bonded full surface and tension free. It delivers 90° peel adhesion of 21 lb/in, dynamic shear strength of 62 lb/in², and tensile strength of 71 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 21 lb/in (ASTM D3330)
- Dynamic Shear Strength: 62 lb/in² (ASTM D1002)
- Tensile Strength: 71 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.078" ±10%
AFTC 5321
AFTC 5321 is a 0.118" thick, double-sided closed cell acrylic foam tape specially designed for bonding high and medium surface energy substrates in low temperature ranges. It features very high initial tack and very good plasticizer resistance, and its excellent adaptability enables thin or textured surfaces to be bonded full surface and tension free. It delivers the highest 90° peel adhesion in the 53xx series at 23 lb/in, dynamic shear strength of 50 lb/in², and tensile strength of 60 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 50 lb/in² (ASTM D1002)
- Tensile Strength: 60 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.118" ±10%
AFTC 5325
AFTC 5325 is a 0.098" thick, double-sided closed cell acrylic foam tape specially designed for bonding high and medium surface energy substrates in low temperature ranges. It features very high initial tack and very good plasticizer resistance, and its excellent adaptability enables thin or textured surfaces to be bonded full surface and tension free. It delivers 90° peel adhesion of 22 lb/in, dynamic shear strength of 58 lb/in², and tensile strength of 64 lb/in², with a temperature range of -40°F to 212°F long-term and 320°F short-term.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 58 lb/in² (ASTM D1002)
- Tensile Strength: 64 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.098" ±10%
AFTC 5330
AFTC 5330 is a 0.025" thick, double-sided closed cell acrylic foam tape in the SilverTape family, formulated for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 18 lb/in, dynamic shear strength of 92 lb/in², and tensile strength of 107 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is suitable for pre-powder coating applications and is formulated to absorb differential thermal expansion between dissimilar bonded materials.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 92 lb/in² (ASTM D1002)
- Tensile Strength: 107 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.025" ±15%
AFTC 5350
AFTC 5350 is a 0.047" thick, single-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding materials with high surface energy such as glass, aluminum, and steel. It delivers 90° peel adhesion of 22 lb/in, dynamic shear strength of 86 lb/in², and tensile strength of 86 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape's high density acrylic foam core is credited on the TDS for creating the strongest available bond on the correct high surface energy substrates.
Key Properties
- 90° Peel Adhesion: 22 lb/in (ASTM D3330)
- Dynamic Shear Strength: 86 lb/in² (ASTM D1002)
- Tensile Strength: 86 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Coated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.047" ±10%
AFTC 5359
AFTC 5359 is a 0.118" thick, double-sided closed cell acrylic foam tape in the SilverTape family, designed for bonding a wide variety of materials with high and medium surface energy. It delivers 90° peel adhesion of 23 lb/in, dynamic shear strength of 58 lb/in², and tensile strength of 77 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape maintains high impact resistance at sub-zero temperatures and is formulated to absorb differential thermal expansion between dissimilar bonded materials.
Key Properties
- 90° Peel Adhesion: 23 lb/in (ASTM D3330)
- Dynamic Shear Strength: 58 lb/in² (ASTM D1002)
- Tensile Strength: 77 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.118" ±10%
AFTC 6004
AFTC 6004 is a 0.015" thick, double-sided closed cell acrylic foam tape specifically designed for bonding steel and aluminum assemblies that are subsequently powder coated. It withstands the high temperatures of the powder coat oven and resists the chemical pre-treatment baths used in the powder coating process, remaining viscoelastic after the full process cycle. It delivers tensile strength of 110 lb/in², dynamic shear strength of 90 lb/in², and 90° peel adhesion of 12 lb/in, with a short-term temperature resistance of 428°F and long-term resistance of 320°F.
Key Properties
- 90° Peel Adhesion: 12 lb/in (ASTM D3330)
- Dynamic Shear Strength: 90 lb/in² (ASTM D1002)
- Tensile Strength: 110 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 320°F long-term / 428°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.015" ±15%
AFTC 6008
AFTC 6008 is a 0.031" thick, double-sided closed cell acrylic foam tape specifically designed for bonding steel and aluminum assemblies that are subsequently powder coated. It withstands the high temperatures of the powder coat oven and resists the chemical pre-treatment baths used in the powder coating process, remaining viscoelastic after the full process cycle. It delivers dynamic shear strength of 89 lb/in², tensile strength of 92 lb/in², and 90° peel adhesion of 14 lb/in, with a short-term temperature resistance of 428°F and long-term resistance of 320°F.
Key Properties
- 90° Peel Adhesion: 14 lb/in (ASTM D3330)
- Dynamic Shear Strength: 89 lb/in² (ASTM D1002)
- Tensile Strength: 92 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 320°F long-term / 428°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.031" ±15%
AFTC 6011
AFTC 6011 is a 0.047" thick, double-sided closed cell acrylic foam tape specifically designed for bonding steel and aluminum assemblies that are subsequently powder coated. It withstands the high temperatures of the powder coat oven and resists the chemical pre-treatment baths used in the powder coating process, remaining viscoelastic after the full process cycle. It delivers dynamic shear strength of 82 lb/in², tensile strength of 84 lb/in², and the highest 90° peel adhesion in this 60xx set at 16 lb/in, with the highest short-term temperature resistance in the set at 464°F and long-term resistance of 320°F.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 82 lb/in² (ASTM D1002)
- Tensile Strength: 84 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 320°F long-term / 464°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.047" ±10%
AFTC 815
AFTC 815 is a 0.006" thick ultra-thin double-sided acrylic foam tape built on a closed-cell acrylic adhesive foam core with a permanent closed cell acrylic adhesive on both faces and a paper liner. At this extreme low profile, the tape is designed to be virtually invisible in assembled parts, enabling permanent bonding of lightweight, thin, and small-format components across a wide range of molded and machined surfaces. It carries a 90° peel adhesion of 14 lb/in and is rated for service from −40°F to 320°F short-term and 212°F long-term.
Key Properties
- 90° Peel Adhesion: 14 lb/in (ASTM D3330)
- Dynamic Shear Strength: 105 lb/in² (ASTM D1002)
- Tensile Strength: 113 lb/in² (ASTM D897)
- Static Shear Strength @ 72°F: 1,000 grams* (ASTM 3654)
- Long-Term Temperature Resistance: 212°F
- Total Tape Thickness: 0.006" ±15%
AFTC 816
AFTC 816 is a 0.006" thick ultra-thin double-sided acrylic foam tape constructed with a closed-cell acrylic adhesive foam core, permanent closed cell acrylic adhesive on both faces, and a paper liner. At this extreme low profile the tape is designed to be virtually invisible in finished assemblies, enabling permanent bonding of lightweight, thin, and small-format components to a wide range of molded and machined surfaces. It delivers a 90° peel adhesion of 14 lb/in and is rated for service from −40°F to 320°F short-term and 212°F long-term.
Key Properties
- 90° Peel Adhesion: 14 lb/in (ASTM D3330)
- Dynamic Shear Strength: 105 lb/in² (ASTM D1002)
- Tensile Strength: 113 lb/in² (ASTM D897)
- Static Shear Strength @ 72°F: 1,000 grams* (ASTM 3654)
- Long-Term Temperature Resistance: 212°F
- Total Tape Thickness: 0.006" ±15%
AFTC 820
AFTC 820 is a 0.008" thick ultra-thin double-sided acrylic foam tape constructed with a closed-cell acrylic adhesive foam core, permanent closed cell acrylic adhesive on both faces, and a paper liner. Designed to bond a wide range of molded parts and surfaces while remaining virtually invisible in assembled components, it delivers a 90° peel adhesion of 15 lb/in and is rated for service from −40°F to 320°F short-term and 212°F long-term.
Key Properties
- 90° Peel Adhesion: 15 lb/in (ASTM D3330)
- Dynamic Shear Strength: 103 lb/in² (ASTM D1002)
- Tensile Strength: 111 lb/in² (ASTM D897)
- Static Shear Strength @ 72°F: 1,000 grams* (ASTM 3654)
- Long-Term Temperature Resistance: 212°F
- Total Tape Thickness: 0.008" ±15%
AFTC 821
AFTC 821 is a 0.008" thick ultra-thin double-sided acrylic foam tape constructed with a closed-cell acrylic adhesive foam core, permanent closed cell acrylic adhesive on both faces, and a paper liner. At this low profile the tape is designed to be virtually invisible in assembled parts while providing reliable adhesion to glass, metal, and coated substrates across a wide range of molded components. It delivers a 90° peel adhesion of 15 lb/in and is rated for service from −40°F to 320°F short-term and 212°F long-term.
Key Properties
- 90° Peel Adhesion: 15 lb/in (ASTM D3330)
- Dynamic Shear Strength: 103 lb/in² (ASTM D1002)
- Tensile Strength: 111 lb/in² (ASTM D897)
- Static Shear Strength @ 72°F: 1,000 grams* (ASTM 3654)
- Long-Term Temperature Resistance: 212°F
- Total Tape Thickness: 0.008" ±15%
AFTC 8302
AFTC 8302 is a 0.009" thick double-sided acrylic foam tape constructed with a closed-cell acrylic adhesive foam core, permanent closed cell acrylic adhesive on both faces, and a red PE liner. Distinguished from standard ultra-thin grades by its elevated thermal resistance — rated for long-term service to 248°F and short-term to 374°F (+100°C to +160°C) — it is designed for bonding molded parts and surfaces in high-temperature environments. It delivers a 90° peel adhesion of 16 lb/in.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 102 lb/in² (ASTM D1002)
- Tensile Strength: 110 lb/in² (ASTM D897)
- Static Shear Strength @ 72°F: 1,000 grams* (ASTM 3654)
- Long-Term Temperature Resistance: 248°F
- Total Tape Thickness: 0.009" ±15%
AFTC 8303
AFTC 8303 is a 0.009" thick double-sided acrylic foam tape built on a closed-cell acrylic adhesive foam core with permanent closed cell acrylic adhesive on both faces and a red PE liner. Sharing the elevated thermal profile of the 8302 grade — long-term resistance to 248°F and short-term to 374°F (+100°C to +160°C) — it is designed for bonding molded parts and surfaces in high-temperature environments where a white tape is required. It delivers a 90° peel adhesion of 16 lb/in.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 102 lb/in² (ASTM D1002)
- Tensile Strength: 110 lb/in² (ASTM D897)
- Static Shear Strength @ 72°F: 1,000 grams* (ASTM 3654)
- Long-Term Temperature Resistance: 248°F
- Total Tape Thickness: 0.009" ±15%
AFTC 8502P
AFTC 8502P is a 0.009" thick, double-sided closed cell acrylic foam tape designed to be virtually invisible in service, recommended specifically for applications where the bond must not be visible. The thin adhesive film provides good adhesive performance on a variety of molded parts and enables the use of lightweight, thin, and small materials in many shapes and sizes. It delivers dynamic shear strength of 86 lb/in², tensile strength of 108 lb/in², and 90° peel adhesion of 15 lb/in, with a temperature range of -40°F to 212°F long-term and 320°F short-term, and excellent UV, aging, solvent, and high temperature resistance from +100°C to +160°C.
Key Properties
- 90° Peel Adhesion: 15 lb/in (ASTM D3330)
- Dynamic Shear Strength: 86 lb/in² (ASTM D1002)
- Tensile Strength: 108 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 212°F long-term / 320°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Paper liner
- Total Tape Thickness: 0.009" ±15%
AFTC AM9304
AFTC AM9304 is a 0.016" thick, double-sided closed cell acrylic foam tape designed for structural bonding of steel, aluminum, and select plastics in vehicle manufacturing applications. It delivers 90° peel adhesion of 15 lb/in, dynamic shear strength of 102 lb/in², and tensile strength of 105 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and provides good plasticizer resistance when used in combination with a primer.
Key Properties
- 90° Peel Adhesion: 15 lb/in (ASTM D3330)
- Dynamic Shear Strength: 102 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.016" ±15%
AFTC AM9306
AFTC AM9306 is a 0.025" thick, double-sided closed cell acrylic foam tape designed for structural bonding of steel, aluminum, and select plastics in vehicle manufacturing applications. It delivers 90° peel adhesion of 16 lb/in, dynamic shear strength of 95 lb/in², and tensile strength of 98 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and provides good plasticizer resistance when used in combination with a primer.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 95 lb/in² (ASTM D1002)
- Tensile Strength: 98 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.025" ±15%
AFTC AM9308
AFTC AM9308 is a 0.031" thick, double-sided closed cell acrylic foam tape designed for structural bonding of steel, aluminum, and select plastics in vehicle manufacturing applications. It delivers 90° peel adhesion of 17 lb/in, dynamic shear strength of 92 lb/in², and tensile strength of 92 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and provides good plasticizer resistance when used in combination with a primer.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 92 lb/in² (ASTM D1002)
- Tensile Strength: 92 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.031" ±15%
AFTC AM9312
AFTC AM9312 is a 0.047" thick, double-sided closed cell acrylic foam tape designed for structural bonding of steel, aluminum, and select plastics in vehicle manufacturing applications. It delivers 90° peel adhesion of 16 lb/in, dynamic shear strength of 86 lb/in², and tensile strength of 86 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and provides good plasticizer resistance when used in combination with a primer.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 86 lb/in² (ASTM D1002)
- Tensile Strength: 86 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.047" ±10%
AFTC AM9316
AFTC AM9316 is a 0.062" thick, double-sided closed cell acrylic foam tape designed for structural bonding of steel, aluminum, and select plastics in vehicle manufacturing applications. It delivers the highest 90° peel adhesion in the AM93 series at 18 lb/in, with dynamic shear strength of 82 lb/in² and tensile strength of 79 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and provides good plasticizer resistance when used in combination with a primer.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 82 lb/in² (ASTM D1002)
- Tensile Strength: 79 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.062" ±10%
AFTC AM9320
AFTC AM9320 is a 0.078" thick, double-sided closed cell acrylic foam tape designed for structural bonding of steel, aluminum, and select plastics in vehicle manufacturing applications. It delivers 90° peel adhesion of 18 lb/in, dynamic shear strength of 80 lb/in², and tensile strength of 72 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and provides good plasticizer resistance when used in combination with a primer.
Key Properties
- 90° Peel Adhesion: 18 lb/in (ASTM D3330)
- Dynamic Shear Strength: 80 lb/in² (ASTM D1002)
- Tensile Strength: 72 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.078" ±10%
AFTC AM9330
AFTC AM9330 is a 0.118" thick, double-sided closed cell acrylic foam tape designed for structural bonding of steel, aluminum, and select plastics in vehicle manufacturing applications. It delivers the highest 90° peel adhesion in the AM93 series at 19 lb/in, with dynamic shear strength of 69 lb/in² and tensile strength of 66 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term. The tape is formulated to absorb differential thermal expansion between dissimilar bonded materials and provides good plasticizer resistance when used in combination with a primer.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 69 lb/in² (ASTM D1002)
- Tensile Strength: 66 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.118" ±10%
AFTC HA7304
AFTC HA7304 is a double-sided heat-activated acrylic foam tape with a 0.016" thick closed-cell acrylic foam core and 90° peel adhesion of 10 lb/in. The tape combines a hotmelt film adhesive designed to bond to extruded EPDM and TP rubber seals with a pressure-sensitive acrylic adhesive rated for continuous service at 248°F and short-term exposure to 374°F. Excellent UV and solvent resistance support long-term performance in demanding sealing and bonding applications.
Key Properties
- 90° Peel Adhesion: 10 lb/in (ASTM D3330)
- Dynamic Shear Strength: 98 lb/in² (ASTM D1002)
- Tensile Strength: 105 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 248°F
- Liner: Red PE liner
AFTC HA7308
AFTC HA7308 is a double-sided heat-activated acrylic foam tape with a 0.031" thick closed-cell acrylic foam core and 90° peel adhesion of 12 lb/in. The tape pairs a hotmelt film adhesive for bonding extruded EPDM and TP rubber seals with a pressure-sensitive acrylic adhesive, rated for continuous service at 248°F and short-term exposure to 374°F. Excellent UV and solvent resistance make it suitable for demanding bonding and sealing environments.
Key Properties
- 90° Peel Adhesion: 12 lb/in (ASTM D3330)
- Dynamic Shear Strength: 92 lb/in² (ASTM D1002)
- Tensile Strength: 92 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 248°F
- Liner: Red PE liner
- Total Tape Thickness: 0.031" ±10%
AFTC HA7312
AFTC HA7312 is a 0.047" thick, double-sided heat activated acrylic foam tape constructed with two distinct adhesive systems. One face uses a hotmelt adhesive — inactive at ambient temperatures — that activates under heat to bond permanently to extruded EPDM or TP seals. The opposite face uses a pressure sensitive adhesive consistent with the Automotive series. It delivers 90° peel adhesion of 17 lb/in, dynamic shear strength of 85 lb/in², and tensile strength of 85 lb/in², and operates across a temperature range of -40°F to 248°F long-term and 374°F short-term.
Key Properties
- 90° Peel Adhesion: 17 lb/in (ASTM D3330)
- Dynamic Shear Strength: 85 lb/in² (ASTM D1002)
- Tensile Strength: 85 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 248°F long-term / 374°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.047" ±10%
