Engineering Films & Liners (UHMW PE)
UHMW PE film is the material of choice when ultra-low coefficient of friction, exceptional abrasion resistance, and chemical inertness are required in wear strip, chafe liner, conveyor guide, and sliding interface applications where elastomeric materials would abrade or deform under repeated contact. Its ultra-high molecular weight polyethylene construction resists abrasion and impact without lubrication, providing a long-service-life sliding surface in precision fabrication and handling equipment. H-O Products carries UHMW PE wear strip in precision thicknesses and converts them to customer specification.
6311-05-BL
6311-05-BL is a pressure sensitive tape constructed from UHMW (Ultra High Molecular Weight Polyethylene) film with a permanent acrylic adhesive, at a nominal overall thickness of 0.007" (0.005" substrate / 0.002" adhesive). It delivers a typical peel adhesion of 50 oz per ASTM D3330 Method A and operates across a temperature range of -40°F to 150°F. The film carrier provides low coefficient of friction combined with abrasion resistance and puncture resistance.
Key Properties
- Peel Adhesion (Typical): 50 oz (ASTM D3330 Method A)
- Peel Adhesion (Minimum): 35 oz (ASTM D3330 Method A)
- Adhesive Type: Acrylic — Permanent
- Operating Temperature: -40°F to 150°F
- Substrate Thickness (Nominal): 0.005" (ASTM D3652)
- Overall Thickness (Nominal): 0.007" (ASTM D3652)
6311-10-BL
6311-10-BL is a pressure sensitive tape constructed from UHMW (Ultra High Molecular Weight Polyethylene) film with a permanent acrylic adhesive, at a nominal overall thickness of 0.012" (0.010" substrate / 0.002" adhesive). It delivers a typical peel adhesion of 70 oz per ASTM D3330 Method A and operates across a temperature range of -40°F to 150°F. The film carrier provides low coefficient of friction combined with abrasion resistance and puncture resistance.
Key Properties
- Peel Adhesion (Typical): 70 oz (ASTM D3330 Method A)
- Peel Adhesion (Minimum): 35 oz (ASTM D3330 Method A)
- Adhesive Type: Acrylic — Permanent
- Operating Temperature: -40°F to 150°F
- Substrate Thickness (Nominal): 0.010" (ASTM D3652)
- Overall Thickness (Nominal): 0.012" (ASTM D3652)