Solid Rubbers & Elastomers
SSP2575
SSP2575 is a 65 durometer heat-cured silicone elastomer formulated for low outgas and low temperature applications, with low temperature flexibility to -116°C (-177°F). Tensile strength is 1,350 psi, elongation 600%, and specific gravity 1.18–1.24. Supplied catalyzed with a Varox (DBPH) peroxide cure system, ready for press-cure molding as compound, compression-molded sheet stock, or custom-molded parts. Black is standard; custom pigmenting is available. Cure profile is 10 minutes at 177°C (350°F) with a 4-hour post bake at 200°C (390°F).
Key Properties
- Durometer (Shore A): 65 (59–69 range)
- Tensile Strength: 1,350 psi (350 psi minimum)
- Elongation: 600% (175% minimum)
- Specific Gravity: 1.18–1.24
- Low Temperature Flexibility: -116°C (-177°F)
- Cure System: Varox (DBPH) peroxide, low outgas formulation
20 Durometer Translucent FDA Grade Solid Silicone
20 Durometer Translucent FDA Grade Solid Silicone is a translucent FDA grade solid silicone sheeting rated at 20 Shore A — the softest and most compliant grade in the translucent FDA silicone series — designed for high food contact and dairy applications. It is easily die-cut and provides a highly flexible gasket and sealing solution across a continuous service range of -80°F to 450°F, with intermittent capability to 500°F. The material passes FDA 21 CFR 177.2600 and is odorless, tasteless, and non-yellowing.
Key Properties
- Durometer / Hardness (Shore A): 20 ±5 — ASTM D2240
- Tensile Strength: 700 psi — ASTM D412
- Elongation: 1200% — ASTM D412
- Tear Strength: 60 psi — ASTM D624
- Specific Gravity: 1.05 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
30 Durometer Commercial Grade Solid Silicone
30 Durometer Commercial Grade Solid Silicone is a commercial grade solid silicone elastomer rated at 30 Shore A — the softest durometer in this series — designed for extreme temperature applications requiring a highly compliant, conformable seal or gasket. It is suited for applications where low closure force or intricate sealing geometry demands maximum flexibility. The material performs across a continuous service range of -80°F to 450°F, with intermittent capability to 500°F. It exhibits inherent UV and ozone resistance, making it appropriate for outdoor and weathering environments.
Key Properties
- Durometer / Hardness (Shore A): 30 ±5 — ASTM D2240
- Tensile Strength: 825 psi — ASTM D412
- Elongation: 800% — ASTM D412
- Tear Strength: 80 ppi — ASTM D624 (Die B)
- Specific Gravity: 1.12 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
30 Durometer FDA Grade Solid Silicone
30 Durometer FDA Grade Solid Silicone is an FDA grade solid silicone sheeting rated at 30 Shore A, designed specifically for food contact applications. It is the softest grade in the FDA silicone series and provides a highly compliant, easily die-cut gasket and sealing solution. The material maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F, and passes FDA 21 CFR 177.2600.
Key Properties
- Durometer / Hardness (Shore A): 30 ±5 — ASTM D2240
- Tensile Strength: 825 psi — ASTM D412
- Elongation: 800% — ASTM D412
- Tear Strength: 80 ppi — ASTM D624, Die B
- Specific Gravity: 1.11 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
30 Durometer Translucent FDA Grade Solid Silicone
30 Durometer Translucent FDA Grade Solid Silicone is a translucent FDA grade solid silicone sheeting rated at 30 Shore A, designed for high food contact and dairy applications requiring a soft, easily die-cut gasket and sealing material. It maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F. The material passes FDA 21 CFR 177.2600 and is odorless, tasteless, and non-yellowing.
Key Properties
- Durometer / Hardness (Shore A): 30 ±5 — ASTM D2240
- Tensile Strength: 700 psi — ASTM D412
- Elongation: 800% — ASTM D412
- Tear Strength: 90 psi — ASTM D624
- Specific Gravity: 1.06 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
40 Durometer Commercial Grade Solid Silicone
40 Durometer Commercial Grade Solid Silicone is a commercial grade solid silicone elastomer rated at 40 Shore A, designed for extreme temperature sealing and gasketing applications requiring a soft, highly flexible material with broad thermal capability. It maintains service performance from -80°F to 450°F continuously, with intermittent resistance to 500°F. The material resists UV and ozone degradation and functions as an effective electrical insulator.
Key Properties
- Durometer / Hardness (Shore A): 40 ±5 — ASTM D2240
- Tensile Strength: 800 psi — ASTM D412
- Elongation: 700% — ASTM D412
- Tear Strength: 100 ppi — ASTM D624 (Die B)
- Specific Gravity: 1.24 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
40 Durometer FDA Grade Solid Silicone
40 Durometer FDA Grade Solid Silicone is an FDA grade solid silicone sheeting rated at 40 Shore A, designed for food contact sealing and gasketing applications. It provides a soft, highly flexible profile suitable for die-cut gaskets and seals in food processing and food service environments. The material maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F, and passes FDA 21 CFR 177.2600.
Key Properties
- Durometer / Hardness (Shore A): 40 ±5 — ASTM D2240
- Tensile Strength: 800 psi — ASTM D412
- Elongation: 700% — ASTM D412
- Tear Strength: 100 ppi — ASTM D624, Die B
- Specific Gravity: 1.26 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
40 Durometer Translucent FDA Grade Solid Silicone
40 Durometer Translucent FDA Grade Solid Silicone is a translucent FDA grade solid silicone sheeting rated at 40 Shore A, designed for high food contact and dairy applications requiring an exceptionally strong, highly extensible, and easily die-cut sealing material. It maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F. The material passes FDA 21 CFR 177.2600 and is odorless, tasteless, and non-yellowing.
Key Properties
- Durometer / Hardness (Shore A): 40 ±5 — ASTM D2240
- Tensile Strength: 1100 psi — ASTM D412
- Elongation: 900% — ASTM D412
- Tear Strength: 200 psi — ASTM D624
- Specific Gravity: 1.10 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
50 Durometer Commercial Grade Solid Silicone
50 Durometer Commercial Grade Solid Silicone is a medium-soft commercial grade solid silicone elastomer at 50 Shore A, occupying the mid-range of the series. It is intended for sealing, gasketing, and glazing applications that require a balance of compliance and physical strength. At 950 psi tensile strength — the highest in the series — this grade offers strong resistance to tearing and physical damage while remaining sufficiently flexible for die-cut gasket profiles.
The material provides inherent resistance to UV radiation and ozone and serves as an effective electrical insulator. Low compression set is cited as a key performance feature, supporting long-term sealing force retention. It is readily processed by die-cutting.
50 Durometer FDA Grade Solid Silicone
50 Durometer FDA Grade Solid Silicone is an FDA grade solid silicone sheeting rated at 50 Shore A, designed for food contact sealing and gasketing applications. It provides a medium-soft profile with high tensile strength, suitable for die-cut gaskets and seals in food processing and food service environments. The material maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F, and passes FDA 21 CFR 177.2600.
Key Properties
- Durometer / Hardness (Shore A): 50 ±5 — ASTM D2240
- Tensile Strength: 950 psi — ASTM D412
- Elongation: 600% — ASTM D412
- Tear Strength: 105 ppi — ASTM D624, Die B
- Specific Gravity: 1.33 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
50 Durometer Translucent FDA Grade Solid Silicone
Product Overview
50 Durometer Translucent FDA Grade Solid Silicone is a translucent FDA grade solid silicone sheeting rated at 50 Shore A, designed for high food contact and dairy applications requiring a medium-soft, high-strength sealing material. It maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F. The material passes FDA 21 CFR 177.2600 and is odorless, tasteless, and non-yellowing.Key Properties
- Durometer / Hardness (Shore A): 50 ±5 — ASTM D2240
- Tensile Strength: 1200 psi — ASTM D412
- Elongation: 900% — ASTM D412
- Tear Strength: 175 psi — ASTM D624
- Specific Gravity: 1.13 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
55 Durometer FDA Grade Industrial Polychloroprene
55 Durometer FDA Grade Industrial Polychloroprene is a Neoprene (CR) blend rubber sheet formulated as an odorless, tasteless, and non-toxic material with a natural resistance to bacterial growth. Developed as a synthetic alternative to natural rubber, it provides moderate oil resistance, good abrasion resistance, and compliance with FDA 21 CFR 177.2600 for use in food processing and related regulated environments.
Key Properties
- Durometer, Shore "A": 55 ±5 — ASTM D2240
- Tensile Strength, psi: 1200 min. — ASTM D412
- Elongation, %: 300 min. — ASTM D412
- Compression Set, 22 hrs @ 212°F: 80% max. — ASTM D395B
- Specific Gravity, g/cc: 1.55 — —
60 Durometer Commercial Grade Solid Silicone
60 Durometer Commercial Grade Solid Silicone is a commercial grade solid silicone elastomer rated at 60 Shore A, designed for extreme temperature applications in architectural, HVAC, and industrial sealing environments. It is rated for continuous service from -80°F to 450°F with intermittent capability to 500°F. The material provides UV and ozone resistance and serves as an effective electrical insulator.
Key Properties
- Durometer / Hardness (Shore A): 60 ±5 — ASTM D2240
- Tensile Strength: 850 psi — ASTM D412
- Elongation: 500% — ASTM D412
- Tear Strength: 105 ppi — ASTM D624 (Die B)
- Specific Gravity: 1.42 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
60 Durometer FDA Grade Solid Silicone
60 Durometer FDA Grade Solid Silicone is an FDA grade solid silicone sheeting rated at 60 Shore A, designed for food contact sealing and gasketing applications requiring a medium-firm, dimensionally stable material. It maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F, and passes FDA 21 CFR 177.2600.
Key Properties
- Durometer / Hardness (Shore A): 60 ±5 — ASTM D2240
- Tensile Strength: 850 psi — ASTM D412
- Elongation: 500% — ASTM D412
- Tear Strength: 105 ppi — ASTM D624, Die B
- Specific Gravity: 1.42 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
60 Durometer Translucent FDA Grade Solid Silicone
60 Durometer Translucent FDA Grade Solid Silicone is a translucent FDA grade solid silicone sheeting rated at 60 Shore A, designed for high food contact and dairy applications requiring a medium-firm, high-strength sealing material. It maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F. The material passes FDA 21 CFR 177.2600 and is odorless, tasteless, and non-yellowing.
Key Properties
- Durometer / Hardness (Shore A): 60 ±5 — ASTM D2240
- Tensile Strength: 1250 psi — ASTM D412
- Elongation: 750% — ASTM D412
- Tear Strength: 180 psi — ASTM D624
- Specific Gravity: 1.15 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
70 Durometer Commercial Grade Solid Silicone
70 Durometer Commercial Grade Solid Silicone is a commercial grade solid silicone elastomer rated at 70 Shore A, designed for extreme temperature sealing, gasketing, and structural load-bearing applications. It is rated for continuous service from -80°F to 450°F, with intermittent capability to 500°F. The material provides UV and ozone resistance and functions as an effective electrical insulator.
Key Properties
- Durometer / Hardness (Shore A): 70 ±5 — ASTM D2240
- Tensile Strength: 900 psi — ASTM D412
- Elongation: 400% — ASTM D412
- Tear Strength: 110 ppi — ASTM D624 (Die B)
- Specific Gravity: 1.43 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
70 Durometer FDA Grade Solid Silicone
70 Durometer FDA Grade Solid Silicone is an FDA grade solid silicone sheeting rated at 70 Shore A, designed for food contact applications requiring a firm, load-resistant sealing material with broad thermal capability. It maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F, and passes FDA 21 CFR 177.2600.
Key Properties
- Durometer / Hardness (Shore A): 70 ±5 — ASTM D2240
- Tensile Strength: 900 psi — ASTM D412
- Elongation: 400% — ASTM D412
- Tear Strength: 110 ppi — ASTM D624, Die B
- Specific Gravity: 1.42 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
70 Durometer Translucent FDA Grade Solid Silicone
70 Durometer Translucent FDA Grade Solid Silicone is a translucent FDA grade solid silicone sheeting rated at 70 Shore A, designed for high food contact and dairy applications requiring a firm, high-strength sealing material with excellent physical robustness. It maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F. The material passes FDA 21 CFR 177.2600 and is odorless, tasteless, and non-yellowing.
Key Properties
- Durometer / Hardness (Shore A): 70 ±5 — ASTM D2240
- Tensile Strength: 1250 psi — ASTM D412
- Elongation: 650% — ASTM D412
- Tear Strength: 200 psi — ASTM D624
- Specific Gravity: 1.19 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
80 Durometer Commercial Grade Solid Silicone
80 Durometer Commercial Grade Solid Silicone is a commercial grade solid silicone elastomer rated at 80 Shore A, designed for extreme temperature applications where a firm, high-durometer silicone is required. It is rated for continuous service from -80°F to 450°F, with intermittent capability to 500°F. The material exhibits UV and ozone resistance and functions as an effective electrical insulator.
Key Properties
- Durometer / Hardness (Shore A): 80 ±5 — ASTM D2240
- Tensile Strength: 950 psi — ASTM D412
- Elongation: 300% — ASTM D412
- Tear Strength: 100 ppi — ASTM D624 (Die B)
- Specific Gravity: 1.48 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
80 Durometer FDA Grade Solid Silicone
80 Durometer FDA Grade Solid Silicone is an FDA grade solid silicone sheeting rated at 80 Shore A, designed for food contact applications requiring a high-durometer, firm sealing material with broad thermal performance. It maintains continuous service from -80°F to 450°F, with intermittent capability to 500°F, and passes FDA 21 CFR 177.2600.
Key Properties
- Durometer / Hardness (Shore A): 80 ±5 — ASTM D2240
- Tensile Strength: 950 psi — ASTM D412
- Elongation: 300% — ASTM D412
- Tear Strength: 100 ppi — ASTM D624, Die B
- Specific Gravity: 1.49 g/cc — ASTM D297
- Service Temperature Range: -80°F to 450°F continuous; 500°F intermittent
90 Durometer Commercial Grade Solid Silicone
90 Durometer Commercial Grade Solid Silicone is a commercial grade solid silicone elastomer rated at 90 Shore A — the firmest grade in this series — designed for extreme temperature applications requiring maximum hardness and dimensional stability. It is rated for continuous service from -80°F to 450°F, with intermittent capability to 500°F. The material provides UV and ozone resistance and functions as an effective electrical insulator.
Key Properties
- Durometer / Hardness (Shore A): 90 ±5 — ASTM D2240
- Tensile Strength: 800 psi — ASTM D412
- Elongation: 200% — ASTM D412
- Tear Strength: 120 ppi — ASTM D624 (Die B)
- Specific Gravity: 1.38 g/cc — ASTM D297
BISCO® HT-1240
40 Shore A General Purpose Solid Silicone
BISCO® HT-1240 is a 40 ±5 Shore A solid silicone elastomer designed for applications requiring enhanced conformability and stable sealing performance under elevated temperature and compression conditions. Rated from −80°F to 425°F, HT-1240 provides flexible surface adaptation while maintaining ≤25% compression set after 70 hours at 302°F.Key Properties
- Hardness: 40 ±5 Shore A
- Tensile Strength: 1110 psi
- Elongation: ≥240%
- Compression Set: ≤25% (70 hrs @ 302°F, 25%)
- Specific Gravity: 1.1 g/cc
- Recommended Service Temperature: −80°F to 425°F
BISCO® HT-1240
BISCO® HT-1240 is a 40 Shore A general purpose solid silicone offering resistance to high temperatures, tear, and most fluids for a variety of industrial applications. It is rated for use from -80°F to 425°F and delivers 1110 psi tensile strength with ≥240% elongation. The material carries a broad compliance portfolio including A-A-59588, AMS 3301-3305, FDA 21 CFR 177.2600, and NSF 51 (File MH62230).
Key Properties
- Durometer, Shore A: 40 ±5 — ASTM D2240
- Tensile Strength: 1110 psi — ASTM D412
- Tensile Elongation: ≥240% — ASTM D412
- Compression Set, 70 Hours @ 302°F @ 25%: ≤25% — ASTM D395
- Specific Gravity: 1.1 g/cc — —
- Recommended Use Temperature: -80°F to 425°F
BISCO® HT-1250
BISCO® HT-1250 is a 50 Shore A general purpose solid silicone offering resistance to high temperatures, tear, and most fluids for a variety of industrial applications. It is rated for use from -80°F to 425°F and delivers 1030 psi tensile strength with ≥200% elongation. The material carries a broad compliance portfolio including A-A-59588, AMS 3301-3305, FDA 21 CFR 177.2600, and NSF 51 (File MH62230).
Key Properties
- Durometer, Shore A: 50 ±5 — ASTM D2240
- Tensile Strength: 1030 psi — ASTM D412
- Tensile Elongation: ≥200% — ASTM D412
- Compression Set, 70 Hours @ 302°F @ 25%: ≤25% — ASTM D395
- Specific Gravity: 1.16 g/cc — —
- Recommended Use Temperature: -80°F to 425°F
BISCO® HT-1250
50 Shore A General Purpose Solid Silicone
BISCO® HT-1250 is a 50 ±5 Shore A solid silicone elastomer engineered for applications requiring balanced flexibility and structural support under sustained compression and elevated temperature exposure. Rated from −80°F to 425°F, HT-1250 maintains ≤25% compression set after 70 hours at 302°F, supporting reliable long-term sealing performance.Key Properties
- Hardness: 50 ±5 Shore A
- Tensile Strength: 1030 psi
- Elongation: ≥200%
- Compression Set: ≤25% (70 hrs @ 302°F, 25%)
- Specific Gravity: 1.16 g/cc
- Recommended Service Temperature: −80°F to 425°F
BISCO® HT-1260
BISCO® HT-1260 is a 60 Shore A general purpose solid silicone offering resistance to high temperatures, tear, and most fluids for a variety of industrial applications. It is rated for use from -80°F to 425°F and delivers 1010 psi tensile strength with ≥150% elongation. The material carries a broad compliance portfolio including A-A-59588, AMS 3301-3305, FDA 21 CFR 177.2600, and NSF 51 (File MH62230).
Key Properties
- Durometer, Shore A: 60 ±5 — ASTM D2240
- Tensile Strength: 1010 psi — ASTM D412
- Tensile Elongation: ≥150% — ASTM D412
- Compression Set, 70 Hours @ 302°F @ 25%: ≤25% — ASTM D395
- Specific Gravity: 1.23 g/cc — —
- Recommended Use Temperature: -80°F to 425°F
BISCO® HT-1260
60 Shore A General Purpose Solid Silicone
BISCO® HT-1260 is a 60 ±5 Shore A solid silicone elastomer engineered for applications requiring increased firmness and dimensional stability under sustained compression and elevated temperature exposure. Rated from −80°F to 425°F, HT-1260 maintains ≤25% compression set after 70 hours at 302°F, supporting reliable sealing performance in higher-load applications.Key Properties
- Hardness: 60 ±5 Shore A
- Tensile Strength: 1010 psi
- Elongation: ≥150%
- Compression Set: ≤25% (70 hrs @ 302°F, 25%)
- Specific Gravity: 1.23 g/cc
- Recommended Service Temperature: −80°F to 425°F
BISCO® HT-1270
70 Shore A General Purpose Solid Silicone
BISCO® HT-1270 is a 70 ±5 Shore A solid silicone elastomer engineered for applications requiring maximum firmness and reduced material deflection under sustained compression and elevated temperature exposure. Rated from −80°F to 425°F, HT-1270 maintains ≤25% compression set after 70 hours at 302°F, supporting reliable sealing performance in high-load environments.Key Properties
- Hardness: 70 ±5 Shore A
- Tensile Strength: 1050 psi
- Elongation: ≥125%
- Compression Set: ≤25% (70 hrs @ 302°F, 25%)
- Specific Gravity: 1.29 g/cc
- Recommended Service Temperature: −80°F to 425°F
BISCO® HT-1270
BISCO® HT-1270 is a 70 Shore A general purpose solid silicone offering resistance to high temperatures, tear, and most fluids for a variety of industrial applications. It is rated for use from -80°F to 425°F and delivers 1050 psi tensile strength with ≥125% elongation. The material carries a broad compliance portfolio including A-A-59588, AMS 3301-3305, FDA 21 CFR 177.2600, and NSF 51 (File MH62230).
Key Properties
- Durometer, Shore A: 70 ±5 — ASTM D2240
- Tensile Strength: 1050 psi — ASTM D412
- Tensile Elongation: ≥125% — ASTM D412
- Compression Set, 70 Hours @ 302°F @ 25%: ≤25% — ASTM D395
- Specific Gravity: 1.29 g/cc — —
- Recommended Use Temperature: -80°F to 425°F
BISCO® HT-6135 Tight Tolerance
BISCO® HT-6135 is a tight tolerance solid silicone rated at 33 Shore A, engineered to achieve superior sealing through high tear strength and the tightest thickness tolerances of all solid silicones in the BISCO® HT series. It delivers >800 psi tensile strength, 116 ppi tear resistance, and a compression set of <25% (70 hours @ 302°F @ 25% deflection). The material is rated for service from -67°F to 392°F and provides resistance to UV, ozone, extreme temperatures, and most fluids.
Key Properties
- Durometer, Shore A: 33 — ASTM D2240
- Tensile Strength: >800 psi — ASTM D412
- Elongation: 580 — ASTM D412
- Compression Set, 70 Hours @ 302°F @ 25%: <25% — ASTM D395
- Specific Gravity: 1.22 g/cc — —
- Temperature Range: -67°F to 392°F
BISCO® HT-6210 Extra Soft
BISCO® HT-6210 is an extra soft solid silicone rated at 61 Shore OO, designed for the most demanding gasketing applications where extremely low closure force and maximum conformability are required. It delivers 480 psi tensile strength, >20 ppi tear resistance, and a compression set of <25% (22 hours @ 302°F @ 50% deflection). The material is rated for service from -67°F to 392°F and exhibits resistance to UV, ozone, extreme temperatures, and most fluids.
Key Properties
- Durometer, Shore OO: 61 — ASTM D2240
- Tensile Strength: 480 psi — ASTM D412
- Elongation: 565% — ASTM D412
- Compression Set, 22 Hours @ 302°F @ 50%: <25% — ASTM D395
- Specific Gravity: 1.07 g/cc — —
BISCO® HT-6220 Soft
BISCO® HT-6220 is a soft solid silicone rated at 20 Shore A, designed for demanding gasketing applications requiring a highly protective seal with low closure force. It delivers 640 psi tensile strength, 116 ppi tear resistance, and a compression set of <25% (70 hours @ 302°F @ 25% deflection). The material is rated for service from -67°F to 392°F and provides resistance to UV, ozone, extreme temperatures, and most fluids.
Key Properties
- Durometer, Shore A: 20 — ASTM D2240
- Tensile Strength: 640 psi — ASTM D412
- Elongation: 580% — ASTM D412
- Compression Set, 70 Hours @ 302°F @ 25%: <25% — ASTM D395
- Specific Gravity: 1.08 g/cc — —
BISCO® HT-6240 Transparent
BISCO® HT-6240 is a transparent solid silicone rated at 41 Shore A, designed for demanding gasketing applications where material transparency improves application aesthetics or enables visual inspection. It delivers 1040 psi tensile strength, 112 ppi tear resistance, and a compression set of <35% (70 hours @ 302°F @ 25% deflection). The material is rated for service from -67°F to 392°F and provides resistance to UV, ozone, extreme temperatures, and most fluids.
Key Properties
- Durometer, Shore A: 41 — ASTM D2240
- Tensile Strength: 1040 psi — ASTM D412
- Elongation: 325% — ASTM D412
- Compression Set, 70 Hours @ 302°F @ 25%: <35% — ASTM D395
- Specific Gravity: 1.07 g/cc — —
BISCO® HT-6360 Fire-Safe
BISCO® HT-6360 is a fire-safe solid silicone rated at 60 Shore A, designed to protect sensitive applications from flame damage through superior flame, smoke, and toxicity (FST) resistance. It achieves UL 94 V-0 (File E83967), meets ASTM E162 flame spread index requirements, and meets ASTM E662 smoke density requirements. The material is rated for service from -67°F to 392°F and provides resistance to UV, ozone, extreme temperatures, and most fluids.
Key Properties
- Durometer, Shore A: 60 — ASTM D2240
- Tensile Strength: >200 psi — ASTM D412
- Elongation: >125% — ASTM D412
- Compression Set, 70 Hours @ 302°F @ 25%: <35% — ASTM D395
- Specific Gravity: 1.71 g/cc — —
- Temperature Range: -67°F to 392°F
BISCO® MS-1630
BISCO® MS-1630 is a premium translucent solid silicone sheeting rated at 30 Shore A, produced from a low volatile, peroxide-free, platinum-cured raw material for use in life science and medical device applications. It delivers a non-toxic, chemically inert cured product with a glossy smooth surface finish and is rated for service from -80°F to 450°F. The material meets USP Class 6 requirements and is compliant with 21 CFR 177.2600.
Key Properties
- Durometer, Shore A: 30 ±5 — ASTM D2240
- Tensile Strength: 800 psi — ASTM D412
- Elongation: 725% — ASTM D412
- Compression Set, 70 Hours @ 212°F @ 25%: 6% — ASTM D395
- Specific Gravity: 1.12 g/cc — ASTM D297
- Temperature Range: -80°F to 450°F
BISCO® MS-1640
BISCO® MS-1640 is a premium translucent solid silicone sheeting rated at 40 Shore A, produced from a low volatile, peroxide-free, platinum-cured raw material for use in life science and medical device applications. It delivers a non-toxic, chemically inert cured product with a glossy smooth surface finish and is rated for service from -80°F to 450°F. The material meets USP Class 6 requirements and is compliant with 21 CFR 177.2600.
Key Properties
- Durometer, Shore A: 40 ±5 — ASTM D2240
- Tensile Strength: 1000 psi — ASTM D412
- Elongation: 700% — ASTM D412
- Compression Set, 70 Hours @ 212°F @ 25%: 6% — ASTM D395
- Specific Gravity: 1.14 g/cc — ASTM D297
- Temperature Range: -80°F to 450°F
BISCO® MS-1650
BISCO® MS-1650 is a premium translucent solid silicone sheeting rated at 50 Shore A, produced from a low volatile, peroxide-free, platinum-cured raw material for use in life science and medical device applications. It delivers a non-toxic, chemically inert cured product with a glossy smooth surface finish and is rated for service from -80°F to 450°F. The material meets USP Class 6 requirements and is compliant with 21 CFR 177.2600.
Key Properties
- Durometer, Shore A: 50 ±5 — ASTM D2240
- Tensile Strength: 1200 psi — ASTM D412
- Elongation: 600% — ASTM D412
- Compression Set, 70 Hours @ 212°F @ 25%: 9.5% — ASTM D395
- Specific Gravity: 1.15 g/cc — ASTM D297
- Temperature Range: -80°F to 450°F
BISCO® MS-1660
BISCO® MS-1660 is a premium translucent solid silicone sheeting rated at 60 Shore A, produced from a low volatile, peroxide-free, platinum-cured raw material for use in life science and medical device applications. It delivers a non-toxic, chemically inert cured product with a glossy smooth surface finish and is rated for service from -80°F to 450°F. The material meets USP Class 6 requirements and is compliant with 21 CFR 177.2600.
Key Properties
- Durometer, Shore A: 60 ±5 — ASTM D2240
- Tensile Strength: 1200 psi — ASTM D412
- Elongation: 600% — ASTM D412
- Compression Set, 70 Hours @ 212°F @ 25%: 12.2% — ASTM D395
- Specific Gravity: 1.17 g/cc — ASTM D297
- Temperature Range: -80°F to 450°F
BISCO® MS-1670
BISCO® MS-1670 is a premium translucent solid silicone sheeting rated at 70 Shore A, produced from a low volatile, peroxide-free, platinum-cured raw material for use in life science and medical device applications. It delivers a non-toxic, chemically inert cured product with a glossy smooth surface finish and is rated for service from -80°F to 450°F. The material meets USP Class 6 requirements and is compliant with 21 CFR 177.2600.
Key Properties
- Durometer, Shore A: 70 ±5 — ASTM D2240
- Tensile Strength: 1200 psi — ASTM D412
- Elongation: 600% — ASTM D412
- Compression Set, 70 Hours @ 212°F @ 25%: 12.3% — ASTM D395
- Specific Gravity: 1.21 g/cc — ASTM D297
- Temperature Range: -80°F to 450°F
Extreme Flame Retardant Silicone Sheeting
Extreme Flame Retardant Silicone Sheeting is a solid silicone elastomer engineered for high flame resistance, available in 60 Shore A (brown) and 65 Shore A (black) durometer grades. Both grades carry UL 94V0 Yellow Card certification and comply with FAR 25.853, with an operating temperature range of -85°F to +550°F (intermittent). The 60 durometer brown grade additionally generates low smoke density, making it suitable for interior transportation applications including rail, air, and sea environments.
Key Properties
- Durometer, Shore "A": 65 ±5 (black) / 60 ±5 (brown) — ASTM D2240
- Tensile Strength, psi: 750 (black) / 1000 (brown) — ASTM D412
- Elongation, %: 240 (black) / 150 (brown) — ASTM D412
- Tear, ppi Die "B": 85 (black) / 125 (brown) — ASTM D624
- Specific Gravity, g/cc: 1.17 (black) / 1.30 (brown) — ASTM D297
- Service Temperature: -85°F to +550°F (intermittent)
Extreme High-Temperature Grade Silicone Sheeting
Extreme High-Temperature Grade Silicone Sheeting is a solid silicone elastomer formulated with advanced heat stabilizer technology to exceed the thermal performance of standard general-purpose silicone, with an operating range of -85°F to +600°F (intermittent). Available in 55 and 60 Shore A durometer grades, the material delivers high tensile strength, elongation, and tear resistance maintained after extended heat aging — greater than 750 psi tensile, greater than 90% elongation, and greater than 70 ppi tear after 168 hours at 300°C.
Key Properties
- Durometer, Shore "A": 60 ±5 (60 Duro) / 55 ±5 (55 Duro) — ASTM D2240
- Tensile Strength, psi: 1200 (60 Duro) / 1050 (55 Duro) — ASTM D412
- Elongation, %: 450 / 450 — ASTM D412
- Tear, ppi Die "B": 140 (60 Duro) / 130 (55 Duro) — ASTM D624
- Specific Gravity, g/cc: 1.27 (60 Duro) / 1.25 (55 Duro) — ASTM D297
- Service Temperature: -85°F to +600°F (intermittent)
Extreme Low-Temperature / High Strength Silicone Sheeting
Extreme Low-Temperature / High Strength Silicone Sheeting is a PVMQ-based solid silicone elastomer combining cryogenic-rated cold flexibility with elevated tensile and tear strength for the most demanding aerospace, defense, and cryogenic sealing applications. With a service range of -178°F to +450°F (525°F intermittent) and compliance to A-A-59588 CL1A/1B/3A and AMS 3334–3346, it offers broader specification coverage than the standard PVMQ grade. Available from 30 to 80 Shore A durometer as a made-to-order product, in thicknesses from .010" to .500" and widths up to 60" in many colors.
Key Properties
- Durometer, Shore "A": 30 ±5 to 80 ±5 (six grades) — ASTM D2240
- Tensile Strength, psi: 850–1200 (varies by grade) — ASTM D412
- Elongation, %: 125–500 (varies by grade) — ASTM D412
- Tear, ppi Die "B": 100–175 (varies by grade) — ASTM D624
- Service Temperature: -178°F to +450°F (525°F intermittent)
- Specifications: A-A-59588 CL1A/1B/3A; AMS 3334, 3335, 3336, 3337, 3338, 3345, 3346
Extreme Low-Temperature Silicone Sheeting
Extreme Low-Temperature Silicone Sheeting is a PVMQ-based solid silicone elastomer engineered for cryogenic and extreme cold-weather sealing applications, with an operating range of -130°F to +450°F (525°F intermittent). Available from 30 to 80 Shore A durometer, it meets A-A-59588 CL1A/1B and AMS 3334–3338 specifications, making it suitable for demanding aerospace, defense, and cryogenic programs. The material is made to order and available in many colors, in thicknesses from .010" to .500" and widths up to 60".
Key Properties
- Durometer, Shore "A": 30 ±5 to 80 ±5 (six grades) — ASTM D2240
- Tensile Strength, psi: 550–750 (varies by grade) — ASTM D412
- Elongation, %: 150–300 (varies by grade) — ASTM D412
- Tear, ppi Die "B": 80–110 (varies by grade) — ASTM D624
- Service Temperature: -130°F to +450°F (525°F intermittent)
- Specifications: A-A-59588 CL1A/1B; AMS 3334, 3335, 3336, 3337, 3338
Fiberglass Reinforced Silicone Sheeting
Fiberglass Reinforced Silicone Sheeting is a plain-weave fiberglass-reinforced solid silicone elastomer engineered for demanding static and dynamic sealing applications where enhanced tensile and tear strength are required. The composite construction provides a minimum combined tensile strength of 1,300 psi with excellent weatherability and resistance to swell in lubricating oils. The material maintains physical properties across a wide temperature range of -80°F to +500°F.
Key Properties
- Durometer, Shore "A": 70 ±10 — ASTM D2240
- Tensile Strength (Fiberglass & Silicone), psi: 1300 Min — —
- Compression Set, %: 35 Maximum — —
- Fiberglass Break Strength, psi: 400×350 — —
- Fiberglass Thickness: .014" — —
- Service Temperature: -80°F to +500°F
Fluorosilicone (FVMQ) Calendered Sheet
Fluorosilicone (FVMQ) Calendered Sheet is a 40 Shore A fluorosilicone elastomer that combines the broad temperature capability of silicone with outstanding chemical resistance to petroleum oils, hydrocarbon fuels, diester oils, dilute acids, and alkalines. Rated for service from -80°F to +450°F (500°F intermittent) and meeting AMS-R-25988 TY2CL1 GRADE 40, it is suited for aerospace, military, and automotive sealing applications. The material carries a low compression set and is produced with FDA-compliant ingredients per Title 21 CFR 177.2600.
Key Properties
- Durometer, Shore "A": 40 ±5 — ASTM D2240
- Tensile Strength, psi: 1200 — ASTM D412
- Elongation, %: 600 — ASTM D412
- Tear, ppi Die "B": 153 — ASTM D624
- Specific Gravity, g/cc: 1.41 — ASTM D297
- Service Temperature: -80°F to +450°F (500°F intermittent)
kSil® GP200
kSil® GP200 is a closed cell, lightweight silicone sponge with a density of 180 kg/m³ and a compression force deflection of 21 kPa, the lowest in the kSil® GP cellular sponge range. It is rated for service from -60°C to +230°C and exhibits water absorption of less than 5%. The material is available in thicknesses from 1.5 mm to 30 mm and is approved for aerospace, automotive, and water contact applications.
Key Properties
- Compression Force Deflection: 21 kPa (ASTM D1056)
- Tensile Strength: 600 kPa (ASTM D412)
- Elongation: 140% (ASTM D412)
- Compression Set: 20% (ASTM D1056)
- Density: 180 kg/m³ (ASTM D1056)
kSil® GP250
kSil® GP250 is a closed cell, lightweight silicone sponge with a density of 235 kg/m³ and a compression force deflection of 34 kPa. It is rated for service from -60°C to +230°C and exhibits a compression set of 12% and water absorption of less than 5%. The material is available in thicknesses from 1.5 mm to 45 mm, the widest thickness range in the kSil® GP cellular sponge range.
Key Properties
- Compression Force Deflection: 34 kPa (ASTM D1056)
- Tensile Strength: 600 kPa (ASTM D412)
- Elongation: 145% (ASTM D412)
- Compression Set: 12% (ASTM D1056)
- Density: 235 kg/m³ (ASTM D1056)
- Operating Temperature Range: -60°C to +230°C
kSil® GP30
Product Overview
kSil® GP30 is a general purpose solid silicone elastomer rated at 30 Shore A, offering excellent elongation (550%) and flexibility for soft sealing and gasketing applications. It delivers 8 MPa (~1160 psi) tensile strength and 16 N/mm (~91 ppi) tear strength, with compression set of 20% (22 hours @ 300°F) and 23% (24 hours @ 150°C). The material meets multiple international compliance standards including FDA 21 CFR 177.2600, FAR 25.853, FMVSS 302, WRAS, and UL 94.Key Properties
- Durometer: 30 Shore A — ISO 48-4
- Tensile Strength: 8 MPa (~1160 psi) — ISO 37 Type 2
- Elongation: 550 % — ISO 37 Type 2
- Compression Set, 22 Hours @ 300°F: 20 % — ISO 815, 22h @175°C
- Thermal Conductivity: 0.24 W/m·°C — ASTM C518
kSil® GP350
kSil® GP350 is a closed cell, lightweight silicone sponge with a density of 300 kg/m³ and a compression force deflection of 48 kPa. It is rated for service from -60°C to +230°C and features a very low compression set of 5% and a tensile strength of 750 kPa. Water absorption is less than 5%, and the material is available in thicknesses from 1.5 mm to 35 mm.
Key Properties
- Compression Force Deflection: 48 kPa (ASTM D1056)
- Tensile Strength: 750 kPa (ASTM D412)
- Elongation: 120% (ASTM D412)
- Compression Set: 5% (ASTM D1056)
- Density: 300 kg/m³ (ASTM D1056)
- Operating Temperature Range: -60°C to +230°C
kSil® GP40
kSil® GP40 is a general purpose solid silicone elastomer rated at 40 Shore A, providing a balance of flexibility and strength with the highest tear strength in the GP series at 23 N/mm (~131 ppi). It delivers 9 MPa (~1305 psi) tensile strength and 525% elongation, with compression set of 22% (22 hours @ 300°F) and 25% (24 hours @ 150°C). The material meets multiple international compliance standards including FDA 21 CFR 177.2600, FAR 25.853, FMVSS 302, and WRAS.
Key Properties
- Durometer: 40 Shore A — ISO 48-4
- Tensile Strength: 9 MPa (~1305 psi) — ISO 37 Type 2
- Elongation: 525 % — ISO 37 Type 2
- Compression Set, 22 Hours @ 300°F: 22 % — ISO 815, 22h @175°C
- Thermal Conductivity: 0.24 W/m·°C — ASTM C518
kSil® GP400
kSil® GP400 is a closed cell, lightweight silicone sponge with a density of 400 kg/m³ and a compression force deflection of 76 kPa — the firmest grade in the kSil® GP cellular sponge range. It is rated for service from -60°C to +230°C and carries the lowest compression set in the GP cellular range at 4%. Water absorption is less than 5%, and the material is available in thicknesses from 1.5 mm to 35 mm.
Key Properties
- Compression Force Deflection: 76 kPa (ASTM D1056)
- Tensile Strength: 750 kPa (ASTM D412)
- Elongation: 120% (ASTM D412)
- Compression Set: 4% (ASTM D1056)
- Density: 400 kg/m³ (ASTM D1056)
kSil® GP450
kSil® GP450 is a closed cell, lightweight silicone sponge with a density of 440 kg/m³ and a compression force deflection of 100 kPa. It is rated for service from -60°C to +230°C and features an exceptionally low compression set of 2% and a tensile strength of 1500 kPa. Water absorption is less than 5%, and the material is available in thicknesses from 1.5 mm to 8.0 mm.
Key Properties
- Compression Force Deflection: 100 kPa (ASTM D1056)
- Tensile Strength: 1500 kPa (ASTM D412)
- Elongation: 130% (ASTM D412)
- Compression Set: 2% (ASTM D1056)
- Density: 440 kg/m³ (ASTM D1056)
kSil® GP50
kSil® GP50 is a general purpose solid silicone elastomer rated at 50 Shore A, offering a medium hardness profile with good elongation and low compression set for a broad range of sealing, gasketing, and food-contact applications. It delivers 9 MPa (~1305 psi) tensile strength and 450% elongation, with compression set of 16% (22 hours @ 300°F) and 15% (24 hours @ 150°C). The material meets multiple international compliance standards including FDA 21 CFR 177.2600, FAR 25.853, FMVSS 302, and WRAS.
Key Properties
- Durometer: 50 Shore A — ISO 48-4
- Tensile Strength: 9 MPa (~1305 psi) — ISO 37 Type 2
- Elongation: 450 % — ISO 37 Type 2
- Compression Set, 22 Hours @ 300°F: 16 % — ISO 815, 22h @175°C
- Thermal Conductivity: 0.24 W/m·°C — ASTM C518
kSil® GP530
kSil® GP530 is a closed cell, lightweight silicone sponge with a density of 515 kg/m³ and a compression force deflection of 172 kPa — the highest in the kSil® GP cellular sponge range. It is rated for service from -60°C to +230°C and carries the highest tensile strength in the GP cellular range at 2000 kPa, with a compression set of 2%. Water absorption is less than 5%, and the material is available in thicknesses from 1.5 mm to 8.0 mm.
Key Properties
- Compression Force Deflection: 172 kPa (ASTM D1056)
- Tensile Strength: 2000 kPa (ASTM D412)
- Elongation: 130% (ASTM D412)
- Compression Set: 2% (ASTM D1056)
- Density: 515 kg/m³ (ASTM D1056)
- Operating Temperature Range: -60°C to +230°C
kSil® GP60
kSil® GP60 is a general purpose solid silicone elastomer rated at 60 Shore A, offering medium-firm hardness with excellent compression set performance and high tensile strength for demanding sealing and structural silicone applications. It delivers 10 MPa (~1450 psi) tensile strength and 400% elongation, with compression set of 10% (22 hours @ 300°F) and 13% (24 hours @ 150°C). The material meets multiple international compliance standards including FDA 21 CFR 177.2600, FAR 25.853, FMVSS 302, and WRAS.
Key Properties
- Durometer: 60 Shore A — ISO 48-4
- Tensile Strength: 10 MPa (~1450 psi) — ISO 37 Type 2
- Elongation: 400 % — ISO 37 Type 2
- Compression Set, 22 Hours @ 300°F: 10 % — ISO 815, 22h @175°C
- Thermal Conductivity: 0.24 W/m·°C — ASTM C518
kSil® GP70
kSil® GP70 is a general purpose solid silicone elastomer rated at 70 Shore A — the firmest grade in the kSil® GP series — offering the lowest compression set in the series (9% @ 24 hours @ 150°C) and high tensile strength for applications requiring dimensional stability and firm sealing under load. It delivers 10 MPa (~1450 psi) tensile strength and 320% elongation with 20 N/mm (~114 ppi) tear strength. The material meets multiple international compliance standards including FDA 21 CFR 177.2600, FAR 25.853, FMVSS 302, and WRAS.
Key Properties
- Durometer: 70 Shore A — ISO 48-4
- Tensile Strength: 10 MPa (~1450 psi) — ISO 37 Type 2
- Elongation: 320 % — ISO 37 Type 2
- Compression Set, 24 Hours @ 150°C: 9 % — ISO 815, 24h @150°C
- Thermal Conductivity: 0.24 W/m·°C — ASTM C518
- Tear Strength: 20 N/mm (~114 ppi) — ASTM D624 Die B
kSil® GP80
kSil® GP80 is a general purpose solid silicone elastomer with an 80 Shore A durometer, making it the firmest grade in the GP solid silicone range. It delivers a tensile strength of 8 MPa and a thermal conductivity of 0.24 W/m·°C. The material meets multiple international food contact, aerospace, and automotive compliance standards.
Key Properties
- Durometer: 80 Shore A (ISO 48-4)
- Tensile Strength: 8 MPa (ISO 37 Type 2)
- Elongation: 300% (ISO 37 Type 2)
- Compression Set, 24 Hours @ 150°C: 18% (ISO 815, 24h @150°C)
- Tear Strength: 20 N/mm (ASTM D624 Die B)
kSil® US30
kSil® US30 is an ultra-soft solid silicone elastomer with an exceptionally high elongation of 800% — no durometer value is listed on the manufacturer's TDS for this grade. It achieves a tensile strength of 9 MPa and a compression set of 19% after 24 hours at 150°C. The material meets multiple aerospace, food contact, and automotive compliance standards including AA-59588, FAR 25.853 Horizontal, FDA 21 CFR 177.2600, BfR XV, EC 1935/2004, and FMVSS 302.
Key Properties
- Tensile Strength: 9 MPa (ISO 37 Type 2)
- Elongation: 800% (ISO 37 Type 2)
- Compression Set, 24 Hours @ 150°C: 19% (ISO 815, 24h @150°C)
- Tear Strength: 18 N/mm (ASTM D624 Die B)
- Thermal Conductivity: 0.24 W/m·°C (ASTM C518)
kSil® US350
kSil® US350 is a lightweight, closed cell silicone sponge with a density of 300 kg/m³ and a compression force deflection of 48 kPa, approved to Aerospace Material Specification AMS 3195. It is rated for service from -60°C to +230°C, passes FAR 25.853 Horizontal flame resistance at both 12 and 60 seconds, and exhibits water absorption of less than 5%. The material is available in thicknesses from 1.6 mm to 25.0 mm.
Key Properties
- Compression Force Deflection: 48 kPa (ASTM D1056)
- Tensile Strength: 1034 kPa (ASTM D412)
- Elongation: 300% (ASTM D412)
- Compression Set: 8% (ASTM D1056)
- Density: 300 kg/m³ (ASTM D1056)
- Operating Temperature Range: -60°C to +230°C
kSil® US40
kSil® US40 is a solid silicone elastomer with a 40 Shore A durometer, offering high elongation of 550% and a tensile strength of 9 MPa. It meets AA-59588 and AMS 3301 specifications and is compliant with FAR 25.853 Horizontal and FDA 21 CFR 177.2600. The material is available in red-orange, black, and grey.
Key Properties
- Durometer: 40 Shore A (ISO 48-4)
- Tensile Strength: 9 MPa (ISO 37 Type 2)
- Elongation: 550% (ISO 37 Type 2)
- Compression Set, 24 Hours @ 150°C: 24% (ISO 815, 24h @150°C)
- Tear Strength: 18 N/mm (ASTM D624 Die B)
- Thermal Conductivity: 0.24 W/m·°C (ASTM C518)
kSil® US400
kSil® US400 is a lightweight, closed cell silicone sponge with a density of 440 kg/m³ and a compression force deflection of 100 kPa, approved to Aerospace Material Specification AMS 3196. It is rated for service from -60°C to +230°C, passes FAR 25.853 Horizontal flame resistance at both 12 and 60 seconds, and features a very low compression set of 3%. Water absorption is less than 5%, and the material is available in thicknesses from 1.6 mm to 25.0 mm.
Key Properties
- Compression Force Deflection: 100 kPa (ASTM D1056)
- Tensile Strength: 1100 kPa (ASTM D412)
- Elongation: 320% (ASTM D412)
- Compression Set: 3% (ASTM D1056)
- Density: 440 kg/m³ (ASTM D1056)
- Operating Temperature Range: -60°C to +230°C
kSil® US50
kSil® US50 is a solid silicone elastomer with a 50 Shore A durometer, offering a balanced combination of elongation (310%) and low compression set (12%). It meets AA-59588 and AMS 3302 specifications and is compliant with FAR 25.853 Horizontal and FDA 21 CFR 177.2600. The material is available in red-orange, black, and grey.
Key Properties
- Durometer: 50 Shore A (ISO 48-4)
- Tensile Strength: 7.5 MPa (ISO 37 Type 2)
- Elongation: 310% (ISO 37 Type 2)
- Compression Set, 24 Hours @ 150°C: 12% (ISO 815, 24h @150°C)
- Tear Strength: 18 N/mm (ASTM D624 Die B)
- Thermal Conductivity: 0.24 W/m·°C (ASTM C518)
kSil® US60
kSil® US60 is a solid silicone elastomer with a 60 Shore A durometer, a tensile strength of 8 MPa, and an elongation of 275%. It carries the broadest compliance portfolio in the kSil® US series, meeting AA-59588, AMS 3303, BfR XV, EC 1935/2004, FAR 25.853 Horizontal, FDA 21 CFR 177.2600, and FMVSS 302. The material is available in red-orange, black, and grey.
Key Properties
- Durometer: 60 Shore A (ISO 48-4)
- Tensile Strength: 8 MPa (ISO 37 Type 2)
- Elongation: 275% (ISO 37 Type 2)
- Compression Set, 24 Hours @ 150°C: 17% (ISO 815, 24h @150°C)
- Tear Strength: 17 N/mm (ASTM D624 Die B)
- Thermal Conductivity: 0.24 W/m·°C (ASTM C518)
kSil® US70
kSil® US70 is a solid silicone elastomer with a 70 Shore A durometer — the firmest grade in the kSil® US series — with a tensile strength of 8 MPa and an elongation of 300%. It meets AA-59588, AMS 3304, BfR XV, EC 1935/2004, FAR 25.853 Horizontal, FDA 21 CFR 177.2600, and FMVSS 302. The material is available in red-orange, black, and grey.
Key Properties
- Durometer: 70 Shore A (ISO 48-4)
- Tensile Strength: 8 MPa (ISO 37 Type 2)
- Elongation: 300% (ISO 37 Type 2)
- Compression Set, 24 Hours @ 150°C: 24% (ISO 815, 24h @150°C)
- Tear Strength: 19 N/mm (ASTM D624 Die B)
- Thermal Conductivity: 0.24 W/m·°C (ASTM C518)
kSil® V-0 70
kSil® V-0 70 is a 70 Shore A solid silicone elastomer specifically formulated to meet stringent flame, rail, and mass transit standards, with a tensile strength of 10.2 MPa and an elongation of 320%. It carries UL 94 V-0, EN 45545, NFPA 130, FAR 25.853 Horizontal and Vertical, and FMVSS 302 compliance. The material is available in grey only.
Key Properties
- Durometer: 70 Shore A (ISO 48-4)
- Tensile Strength: 10.2 MPa (ISO 37 Type 2)
- Elongation: 320% (ISO 37 Type 2)
- Compression Set, 24 Hours @ 150°C: 20% (ISO 815, 24h @150°C)
- Tear Strength: 19 N/mm (ASTM D624 Die B)
- Thermal Conductivity: 0.24 W/m·°C (ASTM C518)
Low Outgassing Silicone Sheeting
Low Outgassing Silicone Sheeting is a solid silicone elastomer specifically formulated and post-cured to minimize the release of volatile compounds under vacuum and/or elevated temperature conditions. The material meets ASTM E595 outgassing requirements with Total Mass Loss (TML) ≤1.00% and Collected Volatile Condensable Material (CVCM) ≤0.10%, meeting the criteria of NASA-STD-6016 for low-outgassing materials. Available in 40, 50, 60, and 70 Shore A durometer grades, it is peroxide free, odorless, and tasteless, with an operating range of -85°F to +525°F (intermittent).
Key Properties
- Durometer, Shore "A": 40 ±5 to 70 ±5 (four grades) — ASTM D2240
- Tensile Strength, psi: 1100–1250 (varies by grade) — ASTM D412
- Elongation, %: 650–900 (varies by grade) — ASTM D412
- Tear, ppi Die "B": 175–200 (varies by grade) — ASTM D624
- Total Mass Loss (TML): ≤1.00% — ASTM E595
- Service Temperature: -85°F to +525°F (intermittent)
Medical Grade Silicone Sheeting
Medical Grade Silicone Sheeting is a solid silicone elastomer formulated from domestically produced silicone rubber. Per the supplier’s documentation, the material family is offered for medical-device applications including implant contact up to 29 days in the human body, and is referenced to USP Class VI, European Pharmacopeia, ISO 10993, and FDA 21 CFR 177.2600 (a food-contact composition standard); the supplier states it is free of organic plasticizers, phthalates, and peroxide cure by-products. Suitability for any implant or patient-contact use must be verified against the supplier’s current documentation for the specific grade and lot, and evaluated by the device maker for the intended device. Available from 10 to 70 Shore A durometer in gloss or matte finish, in thicknesses from .010" to .500" and widths up to 60"; this is a made-to-order product with an operating range of -80°F to +450°F (500°F intermittent).
Key Properties
- Durometer, Shore "A": 30 ±5 to 70 ±5 (seven grades) — ASTM D2240
- Tensile Strength, psi: 1100–1350 (varies by grade) — ASTM D412
- Elongation, %: 600–900 (varies by grade) — ASTM D412
- Tear, ppi Die "B": 170–205 (varies by grade) — ASTM D624
- Service Temperature: -80°F to +450°F (500°F intermittent)
Medium Strength Grade Silicone Sheeting
Medium Strength Grade Silicone Sheeting is a solid silicone elastomer engineered to deliver higher tensile strength, tear resistance, and elongation than general-purpose silicone grades. Available from 25 to 85 Shore A durometer, it provides a superior gasket and sealing solution across a wide hardness range with an operating temperature of -80°F to +450°F (500°F intermittent). The material is easily die-cut and available in thicknesses from .010" to .500" and widths up to 60".
Key Properties
- Durometer, Shore "A": 30 ±5 to 80 ±5 (seven grades) — ASTM D2240
- Tensile Strength, psi: 750–1200 (varies by grade) — ASTM D412
- Elongation, %: 300–900 (varies by grade) — ASTM D412
- Tear, ppi Die "B": 130–200 (varies by grade) — ASTM D624
- Specific Gravity, g/cc: 1.06–1.22 (varies by grade) — ASTM D297
- Service Temperature: -80°F to +450°F (500°F intermittent)
Metal Detectable Grade Silicone Sheeting
Metal Detectable Grade Silicone Sheeting is a solid silicone elastomer incorporating magnetic detectability, enabling seal fragments to be quickly identified and sequestered in-process through magnetic collection. Designed for food, beverage, dairy, and pharmaceutical processing environments where contamination prevention is critical, the material provides an additional layer of product safety in regulated production lines. Available in 40, 50, 60, and 85 Shore A durometer grades, it is peroxide free, odorless, tasteless, non-toxic, and chemically inert, with an operating range of -85°F to +525°F (intermittent).
Key Properties
- Durometer, Shore "A": 40 ±5 to 85 ±5 (four grades) — ASTM D2240
- Tensile Strength, psi: 1050–1250 (varies by grade) — ASTM D412
- Elongation, %: 100–800 (varies by grade) — ASTM D412
- Tear, ppi Die "B": 100–190 (varies by grade) — ASTM D624
- Magnet Pull Test: 4 kg maximum pull (20.5 mm diameter magnet)
- Service Temperature: -85°F to +525°F (intermittent)
MIL-R-6855 / MIL-PRF-6855 Class 2 Neoprene Sheet
MIL-R-6855 / MIL-PRF-6855 Class 2 Neoprene Sheet is a military-specification polychloroprene (CR) rubber sheet meeting the requirements of MIL-R-6855 and its superseding specification MIL-PRF-6855 Class 2. Available from 30 to 80 Shore A durometer, the material delivers tensile strengths from 1,200 to 1,600 psi and elongation from 150% to 500% depending on grade, across a service temperature range of -67°F to +220°F. The sheet is produced in the USA in a smooth black finish and available in both 36" and 48" standard widths, with talc-free grades available.
Key Properties
- Durometer, Shore "A": 30 to 80 (six grades available)
- Tensile Strength, psi: 1,200 to 1,600 (typical, varies by grade)
- Ultimate Elongation, %: 150% to 500% (typical, varies by grade)
- Temperature Range: -67°F to +220°F
- Estimated Weight Per Linear Foot (1/4" × 36"): 2.36 to 2.78 lb (varies by grade)
- Specification: MIL-R-6855 / MIL-PRF-6855 Class 2
SSP2390-10D
SSP2390-10D is the softest grade in the SSP2390 Series of platinum-cured silicone elastomers, with a Shore A durometer of 11 (very soft and conformable). Tensile strength is 370 psi, elongation 990% (the highest in the series), tear strength (Die B) 90 ppi, and specific gravity 1.08. Translucent base color with red, black, gray, and white available. The base material meets USP Class VI biocompatibility requirements and FDA 21 CFR § 177.2600 food-contact requirements (dry and fatty foods), and is RoHS compliant. Cure profile is 10 minutes at 177°C (350°F).
Key Properties
- Durometer (Shore A): 11
- Tensile Strength: 370 psi
- Elongation: 990% (highest in series)
- Tear Strength (Die B): 90 ppi
- Specific Gravity: 1.08
- Compliance: FDA 21 CFR § 177.2600, USP Class VI, RoHS
SSP2390-20D
SSP2390-20D is a soft grade in the SSP2390 Series of platinum-cured silicone elastomers, with a Shore A durometer of 21. Tensile strength is 640 psi, elongation 910%, tear strength (Die B) 135 ppi, and specific gravity 1.09. Translucent base color with red, black, gray, and white available. The base material meets USP Class VI biocompatibility requirements and FDA 21 CFR § 177.2600 food-contact requirements (dry and fatty foods), and is RoHS compliant. Cure profile is 10 minutes at 177°C (350°F).
Key Properties
- Durometer (Shore A): 21
- Tensile Strength: 640 psi
- Elongation: 910%
- Tear Strength (Die B): 135 ppi
- Specific Gravity: 1.09
- Compliance: FDA 21 CFR § 177.2600, USP Class VI, RoHS
SSP2390-30D
SSP2390-30D is a soft-mid grade in the SSP2390 Series of platinum-cured silicone elastomers, with a Shore A durometer of 30. Tensile strength is 950 psi, elongation 890%, tear strength (Die B) 150 ppi, and specific gravity 1.1. Translucent base color with red, black, gray, and white available. The base material meets USP Class VI biocompatibility requirements and FDA 21 CFR § 177.2600 food-contact requirements (dry and fatty foods), and is RoHS compliant. Cure profile is 10 minutes at 177°C (350°F).
Key Properties
- Durometer (Shore A): 30
- Tensile Strength: 950 psi
- Elongation: 890%
- Tear Strength (Die B): 150 ppi
- Specific Gravity: 1.1
- Compliance: FDA 21 CFR § 177.2600, USP Class VI, RoHS
SSP2390-40D
SSP2390-40D is a mid-range grade in the SSP2390 Series of platinum-cured silicone elastomers, with a Shore A durometer of 39. Tensile strength is 1,310 psi, elongation 840%, tear strength (Die B) 165 ppi, and specific gravity 1.12. Translucent base color with red, black, gray, and white available. The base material meets USP Class VI biocompatibility requirements and FDA 21 CFR § 177.2600 food-contact requirements (dry and fatty foods), and is RoHS compliant. Cure profile is 10 minutes at 177°C (350°F).
Key Properties
- Durometer (Shore A): 39
- Tensile Strength: 1,310 psi
- Elongation: 840%
- Tear Strength (Die B): 165 ppi
- Specific Gravity: 1.12
- Compliance: FDA 21 CFR § 177.2600, USP Class VI, RoHS
SSP2390-50D
SSP2390-50D is a peak-tensile grade in the SSP2390 Series of platinum-cured silicone elastomers, with a Shore A durometer of 48. Tensile strength is 1,510 psi, elongation 770%, tear strength (Die B) 165 ppi, and specific gravity 1.14. Translucent base color with red, black, gray, and white available. The base material meets USP Class VI biocompatibility requirements and FDA 21 CFR § 177.2600 food-contact requirements (dry and fatty foods), and is RoHS compliant. Cure profile is 10 minutes at 177°C (350°F). Outgassing: the manufacturer's third-party ASTM E595-15 test on the 60D grade of this series reported TML 0.05%, CVCM 0.004%, and WVR 0.04%, well inside the 1.00% / 0.10% limits used for spacecraft material screening. The 50D shares the same platinum-cure chemistry but was not the tested sample; request the report for your program's review.
Key Properties
- Durometer (Shore A): 48
- Tensile Strength: 1,510 psi
- Elongation: 770%
- Tear Strength (Die B): 165 ppi
- Outgassing (ASTM E595-15): TML 0.05%, CVCM 0.004%, WVR 0.04% (third-party report on the 60D grade of this series)
- Specific Gravity: 1.14
Compliance: FDA 21 CFR § 177.2600, USP Class VI, RoHS
SSP2390-60D
SSP2390-60D is a firm-mid grade in the SSP2390 Series of platinum-cured silicone elastomers, with a Shore A durometer of 59. Tensile strength is 1,500 psi, elongation 770%, tear strength (Die B) 215 ppi, and specific gravity 1.17. Translucent base color with red, black, gray, and white available. The base material meets USP Class VI biocompatibility requirements and FDA 21 CFR § 177.2600 food-contact requirements (dry and fatty foods), and is RoHS compliant. Cure profile is 10 minutes at 177°C (350°F). Outgassing: the manufacturer's third-party ASTM E595-15 test on SSP2390-60D reported TML 0.05%, CVCM 0.004%, and WVR 0.04%, well inside the 1.00% / 0.10% limits used for spacecraft material screening, which is the expected result for a platinum-cured silicone with no peroxide cure by-products.
Key Properties
- Durometer (Shore A): 59
- Tensile Strength: 1,500 psi
- Elongation: 770%
- Tear Strength (Die B): 215 ppi
- Outgassing (ASTM E595-15): TML 0.05%, CVCM 0.004%, WVR 0.04% (third-party report on this grade)
- Specific Gravity: 1.17
- Compliance: FDA 21 CFR § 177.2600, USP Class VI, RoHS
SSP2390-70D
SSP2390-70D is a firm grade in the SSP2390 Series of platinum-cured silicone elastomers, with a Shore A durometer of 72. Tensile strength is 1,390 psi, elongation 720%, tear strength (Die B) 220 ppi, and specific gravity 1.19. Translucent base color with red, black, gray, and white available. The base material meets USP Class VI biocompatibility requirements and FDA 21 CFR § 177.2600 food-contact requirements (dry and fatty foods), and is RoHS compliant. Cure profile is 10 minutes at 177°C (350°F).
Key Properties
- Durometer (Shore A): 72
- Tensile Strength: 1,390 psi
- Elongation: 720%
- Tear Strength (Die B): 220 ppi
- Specific Gravity: 1.19
- Compliance: FDA 21 CFR § 177.2600, USP Class VI, RoHS
SSP2390-80D
SSP2390-80D is a firmest grade in the SSP2390 Series of platinum-cured silicone elastomers, with a Shore A durometer of 79. Tensile strength is 1,310 psi, elongation 670%, tear strength (Die B) 160 ppi, and specific gravity 1.21. Translucent base color with red, black, gray, and white available. The base material meets USP Class VI biocompatibility requirements and FDA 21 CFR § 177.2600 food-contact requirements (dry and fatty foods), and is RoHS compliant. Cure profile is 10 minutes at 177°C (350°F).
Key Properties
- Durometer (Shore A): 79
- Tensile Strength: 1,310 psi
- Elongation: 670%
- Tear Strength (Die B): 160 ppi
- Specific Gravity: 1.21
- Compliance: FDA 21 CFR § 177.2600, USP Class VI, RoHS
50 Durometer Industrial Grade Solid Neoprene
50 Durometer Industrial Grade Solid Neoprene is a 50 Shore A solid neoprene elastomer with a smooth finish, supplied powder free, designed for adhesive applications, isolation pads, window setting blocks, and shock and vibration damping. It delivers 1,000 psi min. tensile strength and 300% min. ultimate elongation with a compression set of 80% max. (22 hours @ 212°F). The material is rated for service from -20°F to 190°F and meets ASTM D2000: 1BC510. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Durometer / Hardness (Shore A): 50 — ASTM D2240
- Tensile Strength: 1,000 psi min. — ASTM D412
- Ultimate Elongation: 300% min. — ASTM D412
- Compression Set, 22 Hours @ 212°F: 80% max. — ASTM D395B
- Specific Gravity: 1.24 gr/cc — —
- Temperature Range: -20°F to 190°F
60 Durometer Industrial Grade Solid Neoprene
Product Overview
60 Durometer Industrial Grade Solid Neoprene is a 60 Shore A solid neoprene elastomer with a smooth finish, supplied powder free, designed for adhesive applications, isolation pads, window setting blocks, and shock and vibration damping. It delivers 1,000 psi min. tensile strength and 300% min. ultimate elongation, is flame retardant, passes FMVSS-302, and meets ASTM D2000: 1BC610. The material is rated for service from -20°F to 190°F. Available - cloth-inserted (CI) construction for enhanced dimensional stability.Key Properties
- Durometer / Hardness (Shore A): 60 — ASTM D2240
- Tensile Strength: 1,000 psi min. — ASTM D412
- Ultimate Elongation: 300% min. — ASTM D412
- Compression Set, 22 Hours @ 212°F: 80% max. — ASTM D395B
- Specific Gravity: 1.32 gr/cc — —
- Temperature Range: -20°F to 190°F
70 Durometer Commercial Grade Solid Neoprene
This is a 70 Shore A (±5) commercial grade solid neoprene (polychloroprene) elastomer with a smooth finish and powder-free surface, offering a minimum tensile strength of 600 psi and a minimum ultimate elongation of 200%. It is rated for service from -30°F to 200°F and is RoHS and REACH compliant. Available in black only with a specific gravity of 1.51 gr/cc. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Durometer/Hardness (Shore A): 70 ±5 (ASTM D2240)
- Tensile Strength (Minimum): 600 psi (ASTM D412)
- Ultimate Elongation (Minimum): 200% (ASTM D412)
- Compression Set @ 22 hrs @ 212°F: 80% max (ASTM D395 Method B)
- Specific Gravity: 1.51 gr/cc
70 Durometer Industrial Grade Solid Neoprene
70 Durometer Industrial Grade Solid Neoprene is a 70 Shore A solid neoprene elastomer with a smooth finish, supplied powder free, designed for adhesive applications, isolation pads, window setting blocks, and shock and vibration damping. It delivers 1,000 psi min. tensile strength and 200% min. ultimate elongation with a compression set of 80% max. (22 hours @ 212°F). The material is rated for service from -20°F to 190°F and is available in the broadest thickness range in the series, from 1/16" to 1". Meets ASTM D2000: 1BC710. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Durometer / Hardness (Shore A): 70 — ASTM D2240
- Tensile Strength: 1,000 psi min. — ASTM D412
- Ultimate Elongation: 200% min. — ASTM D412
- Compression Set, 22 Hours @ 212°F: 80% max. — ASTM D395B
- Specific Gravity: 1.32 gr/cc — —
- Temperature Range: -20°F to 190°F
80 Durometer Industrial Grade Solid Neoprene
80 Durometer Industrial Grade Solid Neoprene is an 80 Shore A solid neoprene elastomer with a smooth finish, supplied powder free, designed for adhesive applications, isolation pads, window setting blocks, and shock and vibration damping. It delivers 1,000 psi min. tensile strength and 100% min. ultimate elongation with a compression set of 80% max. (22 hours @ 212°F). The material is rated for service from -20°F to 190°F and meets ASTM D2000: 1BC810. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Durometer / Hardness (Shore A): 80 — ASTM D2240
- Tensile Strength: 1,000 psi min. — ASTM D412
- Ultimate Elongation: 100% min. — ASTM D412
- Compression Set, 22 Hours @ 212°F: 80% max. — ASTM D395B
- Specific Gravity: 1.46 gr/cc — —
- Temperature Range: -20°F to 190°F
Atlas Bearing™ 258
Atlas Bearing™ 258 is a 50 Shore A Neoprene (CR) bearing pad designed to evenly transfer load from beams to supports in bridge bearing and structural applications. It delivers 2250 psi min. tensile strength and 400% min. elongation with a compression set of 35% max. (22 hours @ 212°F). The material meets AASHTO standard specification M251-06 and AASHTO LRFD bridge construction specification Section 18.2, and is rated to -40°F cold temperature per ASTM D2137.
Key Properties
- Durometer / Hardness (Shore A): 50 — ASTM D2240
- Tensile Strength: 2250 min. psi — ASTM D412
- Compression Set, 22 Hours @ 212°F: 35% max. — ASTM D395B
- Elongation: 400% min. — ASTM D412
- Cold Temperature: -40°F — ASTM D2137
Atlas Bearing™ 268
Atlas Bearing™ 268 is a 60 Shore A Neoprene (CR) bearing pad designed to evenly transfer load from beams to supports in bridge bearing and structural applications. It delivers 2250 psi min. tensile strength and 350% min. elongation with a compression set of 35% max. (22 hours @ 212°F). The material meets AASHTO M251-06 and AASHTO LRFD Section 18.2, passes CMVSS 302 / FMVSS 302 flammability testing, passes ASTM C1166 flame propagation, and is rated to -40°F cold temperature per ASTM D2137.
Key Properties
- Durometer / Hardness (Shore A): 60 — ASTM D2240
- Tensile Strength: 2250 min. psi — ASTM D412
- Compression Set, 22 Hours @ 212°F: 35% max. — ASTM D395B
- Elongation: 350% min. — ASTM D412
- Cold Temperature: -40°F — ASTM D2137
- Ozone, 100 PPHM, 20% Strain, 100 Hours @ 104°F: No cracks — ASTM D1149
Atlas Bearing™ 278
Atlas Bearing™ 278 is a 70 Shore A Neoprene (CR) bearing pad designed to evenly transfer load from beams to supports in bridge bearing and structural applications. It delivers 2250 psi min. tensile strength and 300% min. elongation with a compression set of 35% max. (22 hours @ 212°F). The material meets AASHTO M251-06 and AASHTO LRFD Section 18.2, and is rated to -40°F cold temperature per ASTM D2137.
Key Properties
- Durometer / Hardness (Shore A): 70 — ASTM D2240
- Tensile Strength: 2250 min. psi — ASTM D412
- Compression Set, 22 Hours @ 212°F: 35% max. — ASTM D395B
- Elongation: 300% min. — ASTM D412
- Cold Temperature: -40°F — ASTM D2137
- Ozone, 100 PPHM, 20% Strain, 100 Hours @ 104°F: No cracks — ASTM D1149
Low Smoke, Low Flame, Low Toxicity Neoprene
065E1344 is a polychloroprene (CR) compound formulated specifically for applications requiring stringent fire, smoke, and toxicity performance. With a 65 Shore A durometer, the compound delivers reliable mechanical performance (1,200 psi minimum tensile, 300% minimum elongation per ASTM D412) while meeting demanding rail, mass transit, aerospace, and building/construction smoke and flame specifications including ASTM E662, ASTM C542 (ASTM C1166 procedure), Bombardier SMP 800-C, Boeing BSS 7239, and UL 94V-0. Continuous service from −30°F to +220°F. RoHS, REACH, and California Prop 65 compliant. Made in the USA.
Key Properties
- Durometer Hardness: 65 Shore A (±5) (ASTM D2240)
- Tensile Strength (Minimum): 1,200 psi (ASTM D412)
- Elongation (Minimum): 300% (ASTM D412)
- Operating Temperature: −30°F to +220°F
- Smoke & Flame Compliance: ASTM E662, ASTM C542 (C1166), Bombardier SMP 800-C, Boeing BSS 7239, UL 94V-0
- Regulatory Compliance: RoHS, REACH, California Prop 65
MIL-R-6855 / MIL-PRF-6855 Class 2 Neoprene Sheet
MIL-R-6855 / MIL-PRF-6855 Class 2 Neoprene Sheet is a military-specification polychloroprene (CR) rubber sheet meeting the requirements of MIL-R-6855 and its superseding specification MIL-PRF-6855 Class 2. Available from 30 to 80 Shore A durometer, the material delivers tensile strengths from 1,200 to 1,600 psi and elongation from 150% to 500% depending on grade, across a service temperature range of -67°F to +220°F. The sheet is produced in the USA in a smooth black finish and available in both 36" and 48" standard widths, with talc-free grades available.
Key Properties
- Durometer, Shore "A": 30 to 80 (six grades available)
- Tensile Strength, psi: 1,200 to 1,600 (typical, varies by grade)
- Ultimate Elongation, %: 150% to 500% (typical, varies by grade)
- Temperature Range: -67°F to +220°F
- Estimated Weight Per Linear Foot (1/4" × 36"): 2.36 to 2.78 lb (varies by grade)
- Specification: MIL-R-6855 / MIL-PRF-6855 Class 2
Neoprene AMS 3205
Neoprene AMS 3205 Low Temperature is a 50 Shore A durometer chloroprene (CR) sheet rubber engineered specifically to meet the SAE AMS 3205 aerospace material specification. The defining performance characteristic is low-temperature resilience to −40°F, with continuous service from −40°F to +220°F. Tensile strength is 1,600 psi typical with 400% ultimate elongation typical. Available in thicknesses from 1/64" to 1/2", with 36" or 48" standard widths (custom widths up to 55"). Standard color is black; smooth finish is standard with textured (fabric) and matte finishes available. Made in the USA. Talc present.
Key Properties
- Durometer Hardness: 50 Shore A (±5)
- Tensile Strength (Typical): 1,600 psi
- Ultimate Elongation (Typical): 400%
- Temperature Range: −40°F to +220°F
- Compliance: SAE AMS 3205
- Thickness Range: 1/64" to 1/2"
Neoprene AMS 3208
Neoprene AMS 3208 Weather Resistant is a 50 Shore A durometer chloroprene (CR) sheet rubber engineered specifically to meet the SAE AMS 3208 aerospace material specification. Optimized for superior weather and ozone resistance, supporting reliable performance in outdoor and weather-exposed applications. Tensile strength is 1,200 psi typical with 300% ultimate elongation typical. Continuous service from −30°F to +220°F. Available in thicknesses from 1/64" to 1/2", with 36" or 48" standard widths (custom widths up to 55"). Standard color is black; smooth finish is standard with textured (fabric) and matte finishes available. Made in the USA. Talc present.
Key Properties
- Durometer Hardness: 50 Shore A (±5)
- Tensile Strength (Typical): 1,200 psi
- Ultimate Elongation (Typical): 300%
- Temperature Range: −30°F to +220°F
- Compliance: SAE AMS 3208
- Thickness Range: 1/64" to 1/2"
50 Durometer Commercial Grade EPDM Sheet
50 Durometer Commercial Grade EPDM Sheet is a soft-durometer ethylene propylene diene monomer (EPDM) sheeting compound offering a service temperature range of -40 to +220°F with a tensile strength of 1450 psi and elongation of 400% — the highest tensile and elongation values in the Commercial Grade EPDM Sheet line. The material is compliant with RoHS, REACH, and California Proposition 65 and is manufactured in the USA. At 50 Shore A, this grade provides maximum conformability for applications requiring an EPDM elastomer that seals effectively against irregular or low-load contact surfaces. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Hardness, Shore A: 50 ± 5 (ASTM D2240)
- Tensile Strength: 1450 psi (ASTM D412)
- Elongation: 400% (ASTM D412)
- Service Temperature Range: -40 to +220°F
- Compliance: RoHS, REACH, California Proposition 65
- Polymer: EPDM (Ethylene Propylene Diene Monomer)
553 EPDM Sheet Rubber (50 Duro)
553 is a solid, industrial-grade EPDM sheet rubber (American Biltrite AB-553, ASTM D2000 3BA508A14C12F17) with a Shore A hardness of 50 per ASTM D2240 and a specific gravity of 1.16 g/cc, available in four thicknesses from 1/16″ to 1/4″. Tensile strength is 1,500 psi minimum (per American Biltrite; the earlier H-O data sheet lists 800 psi) and elongation is 300% minimum per ASTM D412, with a service temperature range of -40°F to 250°F. It resists heat, ozone, and sunlight, with no cracking after 70 hours of ozone exposure at 50 pphm per ASTM D1149, and holds up in hot and cold water. It is a dense sheet, not a sponge: it locates and seals under bolt load but does not compress the way a cellular gasket does.
Outgassing: no ASTM E595 (TML / CVCM) data is published for this grade, so it is not a candidate for vacuum or contamination-controlled assemblies. For a solid pad or gasket at 50–60 Shore A with published E595 results, see SSP2390 platinum-cured silicone or Low Outgassing Silicone Sheeting; for a firm foam, see PORON 4701-60.
Key Properties
- Form: Solid EPDM sheet (smooth finish, black)
- Durometer/Hardness (Shore A): 50 (ASTM D2240)
- Tensile Strength (Min): 1,500 psi (ASTM D412)
- Elongation (Min): 300% (ASTM D412)
- Compression Set, 22 Hours @ 158°F, 50% (Max): 50% (ASTM D3958)
- Specific Gravity: 1.16 g/cc
- Temperature Range: -40°F to 250°F
- Outgassing (ASTM E595): not tested / no published data
563 EPDM Sheet Rubber (60 Duro)
563 is a solid, industrial-grade EPDM sheet rubber (American Biltrite AB-563, ASTM D2000 3BA608A14C12F17) with a Shore A hardness of 60 per ASTM D2240 and a specific gravity of 1.2 g/cc, available in eight thicknesses from 1/16″ to 1″. Tensile strength is 800 psi minimum and elongation is 300% minimum per ASTM D412, with a service temperature range of -40°F to 250°F. It resists heat, ozone, and sunlight, with no cracking after 70 hours of ozone exposure at 50 pphm per ASTM D1149, and holds up in hot and cold water. It is a dense sheet, not a sponge: it locates and seals under bolt load but does not compress the way a cellular gasket does.
Outgassing: no ASTM E595 (TML / CVCM) data is published for this grade, so it is not a candidate for vacuum or contamination-controlled assemblies. For a solid pad or gasket at 50–60 Shore A with published E595 results, see SSP2390 platinum-cured silicone or Low Outgassing Silicone Sheeting; for a firm foam, see PORON 4701-60.
Key Properties
- Form: Solid EPDM sheet (smooth finish, black)
- Durometer/Hardness (Shore A): 60 (ASTM D2240)
- Tensile Strength (Min): 800 psi (ASTM D412)
- Elongation (Min): 300% (ASTM D412)
- Compression Set, 22 Hours @ 158°F, 50% (Max): 50% (ASTM D3958)
- Specific Gravity: 1.2 g/cc
- Temperature Range: -40°F to 250°F
- Outgassing (ASTM E595): not tested / no published data
576 NSF Certified EPDM
576 NSF Certified EPDM is a 75 Shore A solid EPDM elastomer certified by NSF International to NSF/ANSI/CAN 61 and meeting the NSF 372 lead content rule, specifically designed for potable water and wastewater applications. It delivers a minimum tensile strength of 1,500 psi, minimum ultimate elongation of 250%, and a compression set of 20% maximum after 22 hours at 158°F, with a service temperature range of -40°F to 275°F. Certification was obtained through extensive product testing and requires multiple audits by NSF International at the manufacturing facility.
Key Properties
- Hardness (Shore A): 75 ±5 (ASTM D2240)
- Tensile Strength: 1,500 psi min. (ASTM D412)
- Ultimate Elongation: 250% min. (ASTM D412)
- Compression Set, 22 hrs @ 158°F: 20% max (ASTM D395B)
- Specific Gravity: 1.17 gr/cc
60 Durometer Commercial Grade EPDM Sheet
60 Durometer Commercial Grade EPDM Sheet is a medium-durometer ethylene propylene diene monomer (EPDM) sheeting compound meeting the requirements of ASTM D2000 M2AA606 C12 F17, with a service temperature range of -40 to +220°F, a tensile strength of 870 psi minimum, and elongation of 250% minimum. The material is compliant with RoHS, REACH, and California Proposition 65 and is manufactured in the USA. This grade is suited for general industrial gasket and sealing applications where a mid-durometer EPDM with a documented ASTM material specification is required. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Hardness, Shore A: 60 ± 5 (ASTM D2240)
- Tensile Strength: 870 psi min (ASTM D412)
- Elongation: 250% min (ASTM D412)
- Service Temperature Range: -40 to +220°F
- Specification: ASTM D2000 M2AA606 C12 F17
- Compliance: RoHS, REACH, California Proposition 65
60 Durometer FDA Grade Industrial EPDM
60 Durometer FDA Grade Industrial EPDM is a 60 Shore A solid EPDM elastomer formulated for food-contact and regulated industrial environments, providing odorless, tasteless, and non-toxic performance with natural resistance to bacterial growth. It delivers a minimum tensile strength of 1,000 psi and minimum ultimate elongation of 300%, with a service temperature range of -40°F to 250°F. The material complies with FDA 21 CFR 177.2600 and is rated to ASTM D2000: 1BA610.
Key Properties
- Durometer / Hardness (Shore A): 60 ±5 (ASTM D2240)
- Tensile Strength: 1,000 psi min. (ASTM D412)
- Ultimate Elongation: 300% min. (ASTM D412)
- Compression Set, 22 hrs @ 158°F: 50% max (ASTM D395B)
- Specific Gravity: 1.33 gr/cc
70 Durometer Commercial Grade EPDM Sheet
70 Durometer Commercial Grade EPDM Sheet is a firm-durometer ethylene propylene diene monomer (EPDM) sheeting compound with a service temperature range of -40 to +220°F, a tensile strength of 1100 psi, and elongation of 250%. The material is compliant with RoHS, REACH, and California Proposition 65 and is manufactured in the USA. At 70 Shore A, this grade provides the highest compression resistance in the Commercial Grade EPDM Sheet line and is suited for sealing applications where dimensional stability under load and resistance to extrusion are the primary design requirements. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Hardness, Shore A: 70 (ASTM D2240)
- Tensile Strength: 1100 psi (ASTM D412)
- Elongation: 250% (ASTM D412)
- Service Temperature Range: -40 to +220°F
- Compliance: RoHS, REACH, California Proposition 65
- Polymer: EPDM (Ethylene Propylene Diene Monomer)
MIL-R-83285 / SAE-AMS-R-83285 GR80
MIL-R-83285 / SAE-AMS-R-83285 GR80 is an 80 durometer Shore A military grade EPDM sheet rubber engineered for excellent resistance across wide temperature ranges. The compound delivers 1800 psi typical tensile strength and 150% typical ultimate elongation across a service range of -60°F to +300°F. Manufactured in the USA in compliance with the Buy American Act and qualified to MIL-R-83285 / SAE-AMS-R-83285 specifications.
Key Properties
- Durometer Hardness: 80 Shore A (± 5)
- Tensile Strength: 1800 psi (typical)
- Ultimate Elongation: 150% (typical)
- Temperature Range: -60°F to +300°F
- Available Thickness: 1/64" to 1/2"
- Estimated Weight (1/8" × 36"): 2.32 lb per linear foot
40 Durometer FDA Grade Industrial Natural Rubber
40 Durometer FDA Grade Industrial Natural Rubber is a 40 Shore A natural rubber elastomer with a smooth beige finish, formulated as an odorless, tasteless, and non-toxic rubber product with natural resistance to bacterial growth. It delivers 2000 psi min. tensile strength — the highest of any FDA rubber grade in this series — and 400% psi min. ultimate elongation with a compression set of 50% max. (22 hours @ 158°F). The material passes FDA 21 CFR 177.2600 and is rated ASTM D2000: 2AA420A13F17, with service from -20°F to 180°F.
Key Properties
- Durometer / Hardness (Shore A): 40 — ASTM D2240
- Tensile Strength: 2000 psi min. — ASTM D412
- Ultimate Elongation: 400% psi min. — ASTM D412
- Compression Set, 22 Hours @ 158°F: 50% max — ASTM D395B
- Specific Gravity: 1.14 gr/cc — —
40 Durometer Natural Rubber Sheet
40 Durometer Natural Rubber Sheet is a soft-durometer polyisoprene elastomer sheeting compound offering a service temperature range of -70 to +180°F and elongation of 500% to 900%. Natural rubber delivers superior resilience, tensile strength, and excellent adhesion to fabrics and metals — performance characteristics that make it the material of choice for dynamic applications requiring energy absorption, abrasion resistance, and flex-crack resistance. At 40 Shore A, this grade provides maximum conformability within the Natural Rubber Sheet line and is well suited for low-load sealing, cushioning, and vibration isolation applications.
Key Properties
- Hardness, Shore A: 40 ± 5 (ASTM D2240)
- Elongation: 500–900%
- Service Temperature Range: -70 to +180°F
- ASTM D2000 / SAE J200 Classification: AA
- ASTM D-1418 Designation: NR
- Recommended Shelf Life: 3 years
50 Durometer Natural Rubber Sheet
Short Description
50 Durometer Natural Rubber Sheet is a medium-soft polyisoprene elastomer sheeting compound offering a service temperature range of -70 to +180°F and elongation of 500% to 900%. Natural rubber delivers superior resilience, tensile strength, and excellent adhesion to fabrics and metals — performance characteristics that make it the material of choice for dynamic applications requiring energy absorption, abrasion resistance, and flex-crack resistance. At 50 Shore A, this grade balances conformability with moderate compression resistance for a broad range of gasket, cushioning, and vibration isolation applications.Key Properties
- Hardness, Shore A: 50 ± 5 (ASTM D2240)
- Elongation: 500–900%
- Service Temperature Range: -70 to +180°F
- ASTM D2000 / SAE J200 Classification: AA
- ASTM D-1418 Designation: NR
- Recommended Shelf Life: 3 years
60 Durometer Natural Rubber Sheet
60 Durometer Natural Rubber Sheet is a medium-durometer polyisoprene elastomer sheeting compound offering a service temperature range of -70 to +180°F and elongation of 500% to 900%. Natural rubber delivers superior resilience, tensile strength, and excellent adhesion to fabrics and metals — performance characteristics that make it the material of choice for dynamic applications requiring energy absorption, abrasion resistance, and flex-crack resistance. At 60 Shore A, this grade is the mid-range hardness selection in the Natural Rubber Sheet line, suited for general industrial gasket, mount, and sealing applications requiring a well-rounded natural rubber profile.
Key Properties
- Hardness, Shore A: 60 ± 5 (ASTM D2240)
- Elongation: 500–900%
- Service Temperature Range: -70 to +180°F
- ASTM D2000 / SAE J200 Classification: AA
- ASTM D-1418 Designation: NR
- Recommended Shelf Life: 3 years
70 Durometer Natural Rubber Sheet
70 Durometer Natural Rubber Sheet is a firm-durometer polyisoprene elastomer sheeting compound offering a service temperature range of -70 to +180°F and elongation of 500% to 900%. Natural rubber delivers superior resilience, tensile strength, and excellent adhesion to fabrics and metals — performance characteristics that make it the material of choice for dynamic applications requiring energy absorption, abrasion resistance, and flex-crack resistance. At 70 Shore A, this grade provides the highest compression resistance in the Natural Rubber Sheet line and is suited for high-load sealing, heavy-duty vibration isolation, and abrasion-resistant applications.
Key Properties
- Hardness, Shore A: 70 ± 5 (ASTM D2240)
- Elongation: 500–900%
- Service Temperature Range: -70 to +180°F
- ASTM D2000 / SAE J200 Classification: AA
- ASTM D-1418 Designation: NR
- Recommended Shelf Life: 3 years
Blast® 139 Natural Rubber
Blast® 139 Natural Rubber is a 40 Shore A natural rubber sheeting with high tear resistance and self-healing qualities, designed for positioning between targets and bullet traps or on the walls of shooting ranges. It delivers 2000 min. psi tensile strength and 400% min. elongation with a compression set of 50% max. (22 hours @ 158°F). The material is rated for service from -20°F to 180°F and is available in four colors.
Key Properties
- Durometer / Hardness (Shore A): 40 — ASTM D2240
- Tensile Strength: 2000 min. psi — ASTM D412
- Elongation: 400% min. — ASTM D412
- Compression Set, 22 Hours @ 158°F: 50% max. — ASTM D395B
- Specific Gravity: 1.14 gr/cc — —
- Temperature Range: -20°F to 180°F
Blast® 168 Natural Rubber
Atlas Bearing™ 168 is a 60 Shore A Natural Rubber bearing pad designed to evenly transfer load from beams to supports in bridge bearing and structural applications. It delivers 2250 min. psi tensile strength and 400% min. elongation with a compression set of 25% max. (22 hours @ 158°F) — the lowest compression set of any Atlas Bearing™ grade. The material meets AASHTO M251-06 and AASHTO LRFD bridge construction specification Section 18.2, and is rated to -40°F cold temperature per ASTM D2137.
Key Properties
- Durometer / Hardness (Shore A): 60 — ASTM D2240
- Tensile Strength: 2250 min. psi — ASTM D412
- Elongation: 400% min. — ASTM D412
- Compression Set, 22 Hours @ 158°F: 25% max. — ASTM D395B
- Specific Gravity: 1.13 g/cc — —
- Cold Temperature: -40°F — ASTM D2137
40 Durometer Industrial Grade Nitrile (NBR/SBR) Rubber Sheet
40 Durometer Industrial Grade Nitrile (NBR/SBR) Rubber Sheet is an industrial grade Nitrile/Styrene-Butadiene (NBR/SBR) blend rubber sheet with a durometer of 40 Shore A, a minimum tensile strength of 1,000 psi, and a minimum elongation of 500%. The material delivers a compression set of 40% maximum at 22 hours/100°C and a service temperature range of -20°F to +190°F (-29°C to +88°C). The sheet is supplied in a smooth black finish with powder, trimmed, in 48" width. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Durometer, Shore "A": 40 — ASTM D2240
- Tensile Strength, psi: 1000 min. — ASTM D412
- Ultimate Elongation, %: 500 min. — ASTM D412
- Compression Set, 22 hrs @ 100°C (212°F): 40% max. — ASTM D395 Method B
- Specific Gravity, g/cc: 1.13
- Service Temperature: -20°F to +190°F (-29°C to +88°C)
50 Durometer Premium Nitrile Sheet
50 Durometer Premium Nitrile Sheet is a premium grade Nitrile (NBR/Buna N) rubber sheet with a durometer of 50 Shore A, a minimum tensile strength of 2,000 psi, and a minimum elongation of 350%. The material delivers a tightly controlled compression set of 25% maximum at 22 hours/100°C, with an extended service temperature range of -40°F to +200°F (-40°C to +93°C). The sheet carries full ASTM D471 resistance data for Oil #1, Oil #3, and Fuel A, and is rated to ASTM D2000: 2BG520B14EF11E014EO34.
Key Properties
- Durometer, Shore "A": 50 — ASTM D2240
- Tensile Strength, psi: 2000 min. — ASTM D412
- Ultimate Elongation, %: 350 min. — ASTM D412
- Compression Set, 22 hrs @ 100°C (212°F): 25% max. — ASTM D395 Method B
- Specific Gravity, g/cc: 1.11
- Service Temperature: -40°F to +200°F (-40°C to +93°C)
60 Durometer Commercial Nitrile Sheet
60 Durometer Commercial Nitrile Sheet is a commercial grade Nitrile (NBR) blend rubber sheet with a durometer of 60 ±5 Shore A, a minimum tensile strength of 800 psi, and a minimum elongation of 350%. The material carries a compression set of 60% maximum at 22 hours/100°C and a service temperature range of -30°F to +190°F (-34°C to +88°C). The sheet is specified to ASTM D2240 Z1=Hardness 60 ±5 Shore A and is supplied in a smooth black powdered finish in 36" and 48" widths up to 1/2" thickness. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Durometer, Shore "A": 60 ±5 — ASTM D2240
- Tensile Strength, psi: 800 min. — ASTM D412
- Ultimate Elongation, %: 350 min. — ASTM D412
- Compression Set, 22 hrs @ 100°C (212°F): 60% max. — ASTM D395 Method B
- Oil Resistance, Oil #3, 70 hrs @ 100°C (212°F) — Volume Change: 120% max. — ASTM D471
- Service Temperature: -30°F to +190°F (-34°C to +88°C)
60 Durometer FDA Grade Industrial Nitrile
60 Durometer FDA Grade Industrial Nitrile is a 60 Shore A NBR/SBR solid nitrile elastomer with a smooth white finish, formulated as an odorless, tasteless, and non-toxic product with natural resistance to bacterial growth. It delivers 1,000 psi min. tensile strength and 300% min. ultimate elongation with a compression set of 50% max. (22 hours @ 212°F). The material passes FDA 21 CFR 177.2600, is rated ASTM D2000: 1BF610, and is rated for service from -40°F to 200°F.
Key Properties
- Durometer / Hardness (Shore A): 60 — ASTM D2240
- Tensile Strength: 1,000 psi min. — ASTM D412
- Ultimate Elongation: 300% min. — ASTM D412
- Compression Set, 22 Hours @ 212°F: 50% max. — ASTM D395B
- Specific Gravity: 1.4 gr/cc — —
- Temperature Range: -40°F to 200°F
70 Durometer Premium Nitrile Sheet
70 Durometer Premium Nitrile Sheet is a premium grade Nitrile (NBR/Buna N) rubber sheet with a durometer of 70 Shore A, a minimum tensile strength of 2,500 psi, and a minimum elongation of 300%. The material delivers a tightly controlled compression set of 25% maximum at 22 hours/100°C and an extended service temperature range of -40°F to +200°F (-40°C to +93°C). Full ASTM D471 resistance data is provided for Oil #1, Oil #3, Fuel A, Fuel B, and Water, and the material is rated to ASTM D2000: 2BG725A14B14EA14EF11EF21EO14EO34. Available - cloth-inserted (CI) construction for enhanced dimensional stability.
Key Properties
- Durometer, Shore "A": 70 — ASTM D2240
- Tensile Strength, psi: 2500 min. — ASTM D412
- Ultimate Elongation, %: 300 min. — ASTM D412
- Compression Set, 22 hrs @ 100°C (212°F): 25% max. — ASTM D395 Method B
- Specific Gravity, g/cc: 1.18
- Service Temperature: -40°F to +200°F (-40°C to +93°C)
AMS 3215 Fuel Resistant Nitrile 70 Durometer
AMS 3215 is a 70 durometer Shore A nitrile (NBR/Buna-N) sheet rubber formulated for excellent resistance to continuous exposure to aromatic and aliphatic fuels. The compound delivers 1700 psi typical tensile strength and 350% typical ultimate elongation across a service range of -30°F to +220°F. Manufactured in the USA in compliance with the Buy American Act and meeting SAE AMS 3215 specification requirements.
Key Properties
- Durometer Hardness: 70 Shore A (± 5)
- Tensile Strength: 1700 psi (typical)
- Ultimate Elongation: 350% (typical)
- Temperature Range: -30°F to +220°F
- Available Thickness: 1/64" to 1/2"
- Estimated Weight (1/8" × 36"): 2.45 lb per linear foot
Bio-Diesel Grade Nitrile Sheet — 60 Durometer
Short Description
Bio-Diesel Grade Nitrile Sheet — 60 Durometer is a 60 Shore A nitrile butadiene rubber (NBR) sheeting compound formulated for verified compatibility with bio-diesel fuel blends including B20 and B100. The material delivers a tensile strength of 1050 psi and 350% elongation across a service temperature range of -30 to +220°F. This grade is produced in the USA and is well suited for fuel system sealing applications where a medium-durometer elastomer with higher elongation is required.Key Properties
- Hardness, Shore A: 60 ± 5 (ASTM D2240)
- Tensile Strength: 1050 psi (ASTM D412)
- Elongation: 350% (ASTM D412)
- Service Temperature Range: -30 to +220°F
- Bio-Diesel Compatibility: Compatible with Bio-Diesel B20 & B100
Bio-Diesel Grade Nitrile Sheet — 70 Durometer
Bio-Diesel Grade Nitrile Sheet — 70 Durometer is a 70 Shore A nitrile butadiene rubber (NBR) sheeting compound formulated for verified compatibility with bio-diesel fuel blends including B20 and B100. The material delivers a tensile strength of 1000 psi and 300% elongation across a service temperature range of -40 to +220°F. This grade is produced in the USA and is suited for fuel system sealing applications requiring a harder, more compression-resistant elastomer profile.
Key Properties
- Hardness, Shore A: 70 ± 5 (ASTM D2240)
- Tensile Strength: 1000 psi (ASTM D412)
- Elongation: 300% (ASTM D412)
- Service Temperature Range: -40 to +220°F
- Bio-Diesel Compatibility: Compatible with Bio-Diesel B20 & B100
- Polymer: NBR (Acrylonitrile-Butadiene Rubber)
Transformer Oil Grade Nitrile Sheet
Transformer Oil Grade Nitrile Sheet is a calendared 60 Shore A nitrile butadiene rubber (NBR) sheeting compound engineered for resistance to transformer oils and dielectric fluids. The material meets ASTM D2000 5BG620 A14 B14 EO34 and the General Electric A12C11E7 specification, with a service temperature range of -30 to +250°F. Calendared processing delivers consistent gauge and surface uniformity suited to precision gasket and sealing applications in electrical equipment.
Key Properties
- Hardness, Shore A: 60 ± 5 (ASTM D2240)
- Tensile Strength: 2000 psi min (ASTM D412)
- Elongation: 300% min (ASTM D412)
- Service Temperature Range: -30 to +250°F
- Specification: ASTM D2000 5BG620 A14 B14 EO34 / General Electric A12C11E7
- Process: Calendared
75 Durometer FKM/VITON® (Fluoroelastomer)
75 Durometer FKM/VITON® (Fluoroelastomer) is a 75 Shore A fluoroelastomer sheet material with 66% fluorine content, designed for gaskets in fuel and oil systems, high-temperature environments, and solvent-resistant applications. It delivers 1,000 psi minimum tensile strength (1,250 psi typical) and 200% minimum elongation (300% typical), with a service temperature range of -20°F to 400°F. The material passes CA Prop 65, is produced with no regrind or recycled materials, and is Made in the USA.
Key Properties
- Durometer / Hardness (Shore A): 75 ±5 — —
- Tensile Strength (Minimum): 1,000 psi — —
- Elongation (Minimum): 200% — —
- Temperature Range: -20°F to 400°F — —
- Fluorine Content: 66% — —
- Resistance to Oil and Fuel: Yes — —
Closed Cell Viton FKM Sponge
Closed Cell Viton FKM Sponge is a closed cell fluoroelastomer sponge rubber sheet manufactured from genuine Chemours Viton polymer, featuring an integral skin on both sides for improved tear resistance and non-absorbent sealing. It is resistant to aliphatic and aromatic hydrocarbons, oils, fuels, ozone, weather, lubricants, acids, and hot water, with a service temperature range of -10°F to +400°F. It is ideal for low-pressure sealing applications where dense Viton sheet material is not practical. All values shown are typical and should not be used for specification purposes.
Key Properties
- Compression Deflection, 25% — Original: 3.5–6.5 psi (varies by thickness)
- Compression Set, 22 Hours @ 75°F: 13%–27% (varies by thickness)
- Density: 10–19 lbs per cubic foot (varies by thickness)
- Water Pick-Up (% Weight Increase): 0.00%–0.06% (varies by thickness)
- Low Temperature Brittleness: -10°F (all thicknesses)
- Temperature Range: -10°F to +400°F
Fluorozone® Mil-Spec Performance FKM AMS 3216 / MIL-R-83248C
Fluorozone Mil-Spec Performance FKM is a 75 durometer Shore A fluoroelastomer (FKM/Viton®-family) sheet rubber formulated to meet the AMS 3216 specification (supersedes MIL-R-83248) and qualified to MIL-R-83248C Type II Class 1. The compound delivers 1850 psi typical tensile strength and 150% typical ultimate elongation across an operating temperature range of -20°F to +500°F. Compared to Fluorozone Premium Performance grade, this material exhibits a higher temperature range and increased tensile strength, with strong resistance to aliphatic hydrocarbon fluids, oils, fuels, lubricants, and most mineral acids.
Key Properties
- Durometer Hardness: 75 Shore A (± 5)
- Tensile Strength: 1600 psi minimum / 1850 psi typical
- Ultimate Elongation: 125% minimum / 150% typical
- Operating Temperature: -20°F to +500°F
- Available Thickness: Rolls 1/64" – 1/4"; Molded Sheets up to 4"
HNBR 60 Durometer
HNBR 60 is a 60 durometer Shore A hydrogenated nitrile butadiene elastomer classified ASTM D2000 BH. The compound delivers 2031 psi tensile strength and 250% ultimate elongation across an operating range of -58°F to +275°F. HNBR is evaluated as a cost-effective alternative to FKM (Viton®) in select high-performance applications requiring resistance to heat, oil, and chemicals.
Key Properties
- Hardness: 60 Shore A (± 5)
- Tensile Strength: 2031 psi
- Ultimate Elongation: 250%
- Compression Set: 10 to 50% (general HNBR)
- Temperature Range: -58°F to +275°F
- ASTM D2000 Classification: BH
HNBR 70 Durometer
HNBR 70 is a 70 durometer Shore A hydrogenated nitrile butadiene elastomer classified ASTM D2000 BH. The compound delivers 2321 psi tensile strength and 250% ultimate elongation across an operating range of -58°F to +275°F. HNBR is evaluated as a cost-effective alternative to FKM (Viton®) in select high-performance applications requiring resistance to heat, oil, and chemicals.
Key Properties
- Hardness: 70 Shore A (± 5)
- Tensile Strength: 2321 psi
- Ultimate Elongation: 250%
- Compression Set: 10 to 50% (general HNBR)
- Temperature Range: -58°F to +275°F
- ASTM D2000 Classification: BH
HNBR 80 Durometer
HNBR 80 is an 80 durometer Shore A hydrogenated nitrile butadiene elastomer classified ASTM D2000 BH. The compound delivers 2900 psi tensile strength and 180% ultimate elongation across an operating range of -58°F to +275°F. HNBR is evaluated as a cost-effective alternative to FKM (Viton®) in select high-performance applications requiring resistance to heat, oil, and chemicals.
Key Properties
- Hardness: 80 Shore A (± 5)
- Tensile Strength: 2900 psi
- Ultimate Elongation: 180%
- Compression Set: 10 to 50% (general HNBR)
- Temperature Range: -58°F to +275°F
- ASTM D2000 Classification: BH
40 Durometer Butyl (IIR) Sheet
40 Durometer Butyl (IIR) Sheet is a soft-durometer chlorinated butyl rubber sheeting compound meeting the requirements of ASTM D2000 M1AA407, with a service temperature range of -40 to +180°F, a tensile strength of 1015 psi minimum, and elongation of 400% minimum. The material is compliant with REACH, RoHS, and California Proposition 65 and is manufactured in the USA. The soft durometer profile and high elongation make this grade well suited for applications requiring an IIR elastomer with maximum conformability and flexibility, including chemical-resistant gaskets, pharmaceutical seals, and steam system components.
Key Properties
- Hardness, Shore A: 40 ± 5 (ASTM D2240)
- Tensile Strength: 1015 psi min (ASTM D412)
- Elongation: 400% min (ASTM D412)
- Service Temperature Range: -40 to +180°F
- Specification: ASTM D2000 M1AA407
- Compliance: REACH, RoHS, California Proposition 65
50 Durometer Butyl (IIR) Sheet
50 Durometer Butyl (IIR) Sheet is a medium-soft butyl rubber sheeting compound meeting the requirements of ASTM D2000 M1AA507, with a service temperature range of -40 to +180°F, a tensile strength of 1100 psi, and elongation of 450%. The material is compliant with REACH, RoHS, and California Proposition 65 and is manufactured in the USA. This grade delivers the highest tensile strength and elongation values in the Butyl (IIR) Sheet line, combining mechanical performance with the inherent low permeability, chemical resistance, and weathering resistance characteristic of butyl rubber.
Key Properties
- Hardness, Shore A: 50 ± 5 (ASTM D2240)
- Tensile Strength: 1100 psi (ASTM D412)
- Elongation: 450% (ASTM D412)
- Service Temperature Range: -40 to +180°F
- Specification: ASTM D2000 M1AA507
- Compliance: REACH, RoHS, California Proposition 65
60 Durometer Butyl (IIR) Sheet
60 Durometer Butyl (IIR) Sheet is a medium-durometer butyl rubber sheeting compound meeting the requirements of ASTM D2000 M1AA607, with a service temperature range of -40 to +180°F, a tensile strength of 1015 psi minimum, and elongation of 300% minimum. The material is compliant with REACH, RoHS, and California Proposition 65 and is manufactured in the USA. This grade is suited for general industrial gasket and sealing applications requiring a mid-durometer butyl elastomer with documented ASTM material specification, low gas permeability, and resistance to weathering, ozone, and polar chemicals.
Key Properties
- Hardness, Shore A: 60 ± 5 (ASTM D2240)
- Tensile Strength: 1015 psi min (ASTM D412)
- Elongation: 300% min (ASTM D412)
- Service Temperature Range: -40 to +180°F
- Specification: ASTM D2000 M1AA607
- Compliance: REACH, RoHS, California Proposition 65
70 Durometer Butyl (IIR) Sheet
70 Durometer Butyl (IIR) Sheet is a firm-durometer butyl rubber sheeting compound meeting the requirements of ASTM D2000 M1AA707, with a service temperature range of -40 to +180°F, a tensile strength of 1015 psi, and elongation of 200%. The material is compliant with REACH, RoHS, and California Proposition 65 and is manufactured in the USA. At 70 Shore A, this grade provides the highest compression resistance in the Butyl (IIR) Sheet line and is suited for sealing applications where dimensional stability under load, resistance to extrusion, and the inherent low permeability of butyl rubber are all required.
Key Properties
- Hardness, Shore A: 70 ± 5 (ASTM D2240)
- Tensile Strength: 1015 psi (ASTM D412)
- Elongation: 200% (ASTM D412)
- Service Temperature Range: -40 to +180°F
- Specification: ASTM D2000 M1AA707
- Compliance: REACH, RoHS, California Proposition 65
80 Durometer Solid PVC with Plasticizer Block Film 1/16”
80 Durometer Solid PVC with Plasticizer Block Film 1/16” is a 1/16" solid polyvinyl chloride (PVC) sheet mechanically bonded to a .0005" polymeric film barrier on one side, with a permanent single-sided acrylic pressure sensitive adhesive (.003" thick) protected by a 78# clay coated liner. The plasticizer block film eliminates plasticizer migration to maintain long-term adhesive bond integrity to many substrate types. Peel adhesion is 100 oz./inch and shear strength exceeds 100+ hours (1" x 1" x 1,000G). The solid vinyl service temperature range is -20°F to 200°F; the acrylic adhesive service temperature range is -30°F to 220°F.
Key Properties
- Peel Adhesion: 100 oz./inch — PSTC-1
- Shear Strength (1" x 1" x 1,000G): 100+ hours — PSTC-7
- Tensile Strength (Minimum): 250 lb/in² — ASTM D412 (DIE C)
- Service Temperature, Solid Vinyl: -20°F to 200°F — —
- Durometer / Hardness (Shore A): 75 ±5 — ASTM D2240
- Liner: 78# clay coated — —
80 Durometer Solid PVC with Plasticizer Block Film 1/8”
80 Durometer Solid PVC with Plasticizer Block Film ⅛” is a 1/8" solid polyvinyl chloride (PVC) sheet mechanically bonded to a .0005" polymeric film barrier on one side, with a permanent single-sided acrylic pressure sensitive adhesive (.003" thick) protected by a 78# clay coated liner. The plasticizer block film eliminates plasticizer migration to maintain long-term adhesive bond integrity to many substrate types. Peel adhesion is 100 oz./inch and shear strength exceeds 100+ hours (1" x 1" x 1,000G). The solid vinyl service temperature range is -20°F to 200°F; the acrylic adhesive service temperature range is -30°F to 220°F.
Key Properties
- Peel Adhesion: 100 oz./inch — PSTC-1
- Shear Strength (1" x 1" x 1,000G): 100+ hours — PSTC-7
- Tensile Strength (Minimum): 250 lb/in² — ASTM D412 (DIE C)
- Service Temperature, Solid Vinyl: -20°F to 200°F — —
- Durometer / Hardness (Shore A): 75 ±5 — ASTM D2240
- Liner: 78# clay coated — —
Plain Cork MS113
Plain Cork MS113 is a plain cork sheeting bound with polyurethane and composed of 0.5 mm cork granules, designed for no-skid, no-scratch protection of ceramic and porcelain products, spacer applications, and shipping glass "loose-light." It achieves compressibility of 35%–55% @ 100 PSI and recovery of ≥ 75% @ 100 PSI per ISO 7322, with a minimum specific weight of ≥ 160 kg/m³ and a tensile strength of ≥ 242 kPa (≥ 35.1 psi).
Key Properties
- Compressibility @ 100 PSI: 35% - 55% — ISO 7322
- Recovery @ 100 PSI: ≥ 75% — ISO 7322
- Tensile Strength: ≥ 242 kPa (≥ 35.1 psi) — ISO 7322
- Specific Weight: ≥ 160 kg/m³ — ISO 7322
- Cork Granule Size: 0.5 mm — —
- Boiling Water: No disaggregation — ISO 7322
Rubberized Cork BC351-207
Rubberized Cork BC351-207 is a natural cork and polymeric rubber composite sheeting (Cork Grade BC351, granule size 0.5–1 mm) providing a tough, high-wear material with excellent compression resistance and a high coefficient of friction. It delivers 110 psi min. tensile strength, compressibility of 20%–40% @ 400 PSI, and 70% min. recovery per ASTM F36, with a minimum density of 30 lb/ft³ per ASTM F1315. It is suited for gaskets, bumpers, shims, anti-skid applications, and glass wall assemblies.
Key Properties
- Compressibility @ 400 PSI: 20% - 40% — ASTM F36
- Recovery: 70% min — ASTM F36
- Tensile Strength: 110 psi min. — ASTM F152
- Density: 30 lb/ft³ min. — ASTM F1315
- Flexibility, Initial (F=5): No cracks — ASTM F147
Technical Rubberized Cork DC100-312
Technical Rubberized Cork DC100-312 is a synthetic rubber-bound technical cork composite (Cork Grade DC100, granule size 1–2 mm) designed for demanding flange gasket, oil-resistant seal, and special-profile applications. It achieves a durometer range of 55–75 Shore A, compressibility of 25%–45% @ 400 PSI, and recovery of 70% min per ASTM F36. The material is rated from -40°F to 230°F and provides controlled fluid resistance to petroleum oils and fuel per ASTM F146.
Key Properties
- Durometer / Hardness (Shore A): 55-75 — ASTM D2240
- Compressibility @ 400 PSI: 25%-45% — ASTM F36
- Recovery: 70% min — ASTM F36
- Low Temperature Limit: -40°F — —
- High Temperature Limit: 230°F — —
Technical Rubberized Cork DC100-314
Product Overview
Technical Rubberized Cork DC100-314 is a synthetic rubber-bound technical cork composite (Cork Grade DC100, granule size 0.5–2 mm) designed for demanding flange gasket, oil-resistant seal, and special-profile applications. It achieves a durometer range of 55–75 Shore A, compressibility of 25%–45% @ 400 PSI, and recovery of 70% min per ASTM F36. The material is rated from -4°F to 230°F and provides controlled fluid resistance to petroleum oils and fuel per ASTM F146.Key Properties
- Durometer / Hardness (Shore A): 55 - 75 — ASTM D2240
- Compressibility @ 400 PSI: 25% - 45% — ASTM F36
- Recovery: 70% min — ASTM F36
- Low Temperature Limit: -4°F — —
- High Temperature Limit: 230°F — —
- Cork Granule Size: 0.5 - 2 mm — —
Technical Rubberized Cork SP52
Technical Rubberized Cork SP52 is a chloroprene rubber-bound technical cork composite (granule size .05/1 mm) designed for demanding flange gasket, oil-resistant seal, and special-profile applications. It achieves a durometer range of 46–66 Shore A, compressibility of 40%–60% @ 400 PSI, and recovery of 75% @ 400 PSI per ASTM F36. Density ranges from 480–720 kgm³. The material is rated from -40°F to 230°F and provides controlled fluid resistance to petroleum oils and fuel per ASTM F146.
Key Properties
- Durometer / Hardness (Shore A): 46-66 — ASTM D2240
- Compressibility @ 400 PSI: 40%-60% — ASTM F36
- Recovery @ 400 PSI: 75% — ASTM F36
- Low Temperature Limit: -40°F — —
- High Temperature Limit: 230°F — —
F-1 SAE Pressed Felt
F-1 SAE Pressed Felt is a strong, durable pressed wool felt with a minimum of 95% wool content (SAE Number F-1, NTA Number 34R1, Commercial Standard Grade 16R1), rated for service from -80°F to 200°F. It delivers 500 psi minimum tensile strength, 21 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection per ASTM D461. The material provides excellent abrasion, oxidation, solvent, and UV resistance and is supplied in white.
Key Properties
- Durometer / Hardness (Shore A): 30 - 40 — ASTM D461
- Tensile Strength (min): 500 psi — ASTM D412
- Compressibility @ 10% Deflection: 21 psi — ASTM D461
- Specific Gravity: 0.34 — ASTM D461
- Temperature Range: -80°F to 200°F — —
- Liquid Absorption: > 175% (1.0 sp gr) — ASTM D461
F-10 SAE Pressed Felt
F-10 SAE Pressed Felt is a pressed wool felt with a minimum of 95% wool content (SAE Specification J314 F-10, ASTM Classification D2475 18R1, Federal Specification C-F-206G 9R1), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 225 psi minimum tensile strength, 4 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection. Supplied in white/cream with a standard roll width of 72" (1.83 m) in thicknesses from 1/8" to 1". On a firmness scale of 1–10, the F-10 rates a 5. The TDS notes it will break down quicker in use than an F-5.
Key Properties
- Hardness Range (Shore A): 15–25 — ASTM D2240
- Tensile Strength (min): 225 psi — ASTM D412
- Compressibility (10% defl.): 4 psi — ASTM D461
- Nominal Specific Density: 0.18 g/cm³ — —
- Temperature Range: -80°F to +200°F | -62°C to +93°C — —
- Liquid Absorption — By Weight: > 400% (1.0 sp gr) — ASTM D461
F-11 SAE Pressed Felt
F-11 SAE Pressed Felt is a pressed wool felt with a minimum of 87% wool content (SAE Specification J314 F-11, ASTM Classification D2475 18R2, Federal Specification C-F-206G 9R2), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 200 psi minimum tensile strength, 4 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection. Supplied in grey with a standard roll width of 72" (1.83 m) in thicknesses from 1/8" to 1". On a firmness scale of 1–10, the F-11 rates a 5. The TDS notes it will break down quicker in use than an F-7.
Key Properties
- Hardness Range (Shore A): 15–25 — ASTM D2240
- Tensile Strength (min): 200 psi — ASTM D412
- Compressibility (10% defl.): 4 psi — ASTM D461
- Nominal Specific Density: 0.18 g/cm³ — —
- Temperature Range: -80°F to +200°F | -62°C to +93°C — —
F-2 SAE Pressed Felt
F-2 SAE Pressed Felt is a firm, dense pressed wool felt with a minimum of 95% wool content (SAE Specification J314 F-2, ASTM Classification D2475 34R1, Federal Specification C-F-206G 16R1), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 500 psi minimum tensile strength, 21 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection. Available in pink and supplied in standard roll widths of 60" (1.52 m) in thicknesses from 1/8" to 1". On a firmness scale of 1–10, the F-2 rates a 9.
Key Properties
- Hardness Range (Shore A): 30–40 — ASTM D2240
- Tensile Strength (min): 500 psi — ASTM D412
- Compressibility (10% defl.): 21 psi — ASTM D461
- Nominal Specific Density: 0.34 g/cm³ — —
- Temperature Range: -80°F to +200°F | -62°C to +93°C — —
- Liquid Absorption — By Weight: > 175% (1.0 sp gr) — ASTM D461
F-3 SAE Pressed Felt
F-3 SAE Pressed Felt is a strong, durable pressed wool felt with a minimum of 85% wool content (SAE Number F-3, NTA Number 34R3, Commercial Standard Grade 16R3), rated for service from -80°F to 200°F. It delivers 400 psi minimum tensile strength, 13 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection per ASTM D461. The material provides excellent abrasion, oxidation, solvent, and UV resistance and is supplied in gray.
Key Properties
- Durometer / Hardness (Shore A): 30 - 40 — ASTM D461
- Tensile Strength (min): 400 psi — ASTM D412
- Compressibility @ 10% Deflection: 13 psi — ASTM D461
- Specific Gravity: 0.34 — ASTM D461
- Temperature Range: -80°F to 200°F — —
- Liquid Absorption: > 190% (1.0 sp gr) — ASTM D461
F-5 SAE Pressed Felt
F-5 SAE Pressed Felt is a pressed wool felt with a minimum of 95% wool content (SAE Specification J314 F-5, ASTM Classification D2475 26R1, Federal Specification C-F-206G 12R1), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 400 psi minimum tensile strength, 6 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection. Supplied in white with a standard roll width of 72" (1.83 m) in thicknesses from 1/8" to 1". On a firmness scale of 1–10, the F-5 rates a 7.
Key Properties
- Hardness Range (Shore A): 20–30 — ASTM D2240
- Tensile Strength (min): 400 psi — ASTM D412
- Compressibility (10% defl.): 6 psi — ASTM D461
- Nominal Specific Density: 0.26 g/cm³ — —
- Temperature Range: -80°F to +200°F | -62°C to +93°C — —
F-50 SAE Pressed Felt
F-50 SAE Pressed Felt is a strong, durable thin-gauge pressed wool felt with a minimum of 95% wool content (SAE Number F-50, NTA Number 34R1, Commercial Standard Grade 16R1X), rated for service from -80°F to 200°F. It delivers 500 psi minimum tensile strength, 99% recovery within 1 minute after 10% deflection, and a Mullen bursting strength of 225 psi. Available in white in thin precision thicknesses of 3/64", 1/16", 5/64", and 3/32", it is suited for bearing seals, strips, wicks, industrial filters, and uses requiring thin precision felt.
Key Properties
- Tensile Strength (min): 500 psi — ASTM D412
- Mullen Bursting Strength (1/8"): 225 psi — ASTM D461
- Recovery Within 1 Minute After 10% Deflection: 99% — ASTM D461
- Specific Gravity: 0.34 — ASTM D461
- Temperature Range: -80°F to 200°F — —
- Liquid Absorption: > 180% (1.0 sp gr) — ASTM D461
F-51 SAE Pressed Felt
F-51 SAE Pressed Felt is a durable thin-gauge pressed wool felt with a minimum of 92% wool content (SAE Number F-51, NTA Number 34R3, Commercial Standard Grade 16R3X), rated for service from -80°F to 200°F. It delivers 300 psi minimum tensile strength, 99% recovery within 1 minute after 10% deflection, and a Mullen bursting strength of 225 psi. Available in grey in thin precision thicknesses of 3/64", 1/16", 5/64", and 3/32", it is suited for gaskets, liners, bearing seals, and applications where precision tolerance, life, and quality are not as exacting.
Key Properties
- Tensile Strength (min): 300 psi — ASTM D412
- Mullen Bursting Strength (1/8"): 225 psi — ASTM D461
- Recovery Within 1 Minute After 10% Deflection: 99% — ASTM D461
- Specific Gravity: 0.34 — ASTM D461
- Temperature Range: -80°F to 200°F — —
F-55 SAE Pressed Felt
F-55 SAE Pressed Felt is a pressed wool felt with a minimum of 75% wool content (SAE Specification J314 F-55, ASTM Classification D2475 26R3, Federal Specification C-F-206G 12R3X), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 200 psi minimum tensile strength and 99% recovery within 1 minute after 10% deflection. Supplied in grey with a standard roll width of 60" (1.52 m), it is available only in thin precision thicknesses of 1/16" and 3/32". The F-55 has the same specifications as F-7 but denotes a thickness less than 1/16" and is rated 9 on a firmness scale of 1–10 for high resilience. Due to its high resilience, F-55 is recommended for uses where surface integrity is needed and color is required.
Key Properties
- Hardness Range (Shore A): — — ASTM D2240
- Tensile Strength (min): 200 psi — ASTM D412
- Compressibility (10% defl.): — — ASTM D461
- Nominal Specific Density: 0.26 g/cm³ — —
- Temperature Range: -80°F to +200°F | -62°C to +93°C — —
- Liquid Absorption — By Weight: > 225% (1.0 sp gr) — ASTM D461
F-7 SAE Pressed Felt
F-7 SAE Pressed Felt is a pressed wool felt with a minimum of 80% wool content (SAE Specification J314 F-7, ASTM Classification D2475 26R3, Federal Specification C-F-206G 12R3), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 250 psi minimum tensile strength, 6 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection. Supplied in grey with a standard roll width of 72" (1.83 m) in thicknesses from 1/8" to 1". On a firmness scale of 1–10, the F-7 rates a 7.
Key Properties
- Hardness Range (Shore A): 20–30 — ASTM D2240
- Tensile Strength (min): 250 psi — ASTM D412
- Compressibility (10% defl.): 6 psi — ASTM D461
- Nominal Specific Density: 0.26 g/cm³ — —
- Temperature Range: -80°F to +200°F | -62°C to +93°C — —
- Liquid Absorption — By Weight: > 225% (1.0 sp gr) — ASTM D461
SAE F-26 Pressed Felt
SAE F-26 Pressed Felt is a needled wool felt with a minimum of 45% wool content, rated 3 on a firmness scale of 1–10, designed for packing, padding, and sound absorption in non-mechanical applications. It delivers 99% recovery within one minute after 10% deflection and a noise reduction coefficient of 0.65 at 1" thickness, with a service temperature range of -80°F to +200°F (-62°C to +93°C). Standard widths of 72" are available in thicknesses from 1/8" to 1".
Key Properties
- Hardness Range (Shore A): 5–15 (ASTM D2240)
- Compressibility (10% defl.): 1 psi (ASTM D461)
- Recovery (within 1 min after 10% defl.): 99% (ASTM D461)
- Nominal Specific Density: 0.15 g/cm³
- Temperature Range: -80°F to +200°F | -62°C to +93°C
