SAE Pressed Felt

SAE pressed felt is the material of choice when mechanical wiping, oil-reservoir wicking, vibration lining, or precision pad applications require a compressed wool textile material graded to SAE standards rather than a synthetic elastomer. Its compressed wool construction provides controlled porosity, oil absorption, and damping characteristics in electromechanical and industrial applications — from instrument wiper pads to machinery vibration liners — where felt’s fiber structure is the functional requirement. H-O Products carries SAE pressed felt across the full grade range from F-1 through F-55, and converts them to customer specification.

F-1 SAE Pressed Felt

F-1 SAE Pressed Felt is a strong, white non-woven wool felt (SAE number F-1, NTA number 34R1, Commercial Standard Grade 16R1) with 95% minimum wool content, 500 psi minimum tensile strength, 30–40 Shore A hardness and a −80°F to 200°F temperature range. It goes into bearing seals, lubricator wicks, ink rolls, printing pads, polishing and wiping parts, and protective furniture pads. The oil-resistant fabric holds up over repeated use, with 250 psi Mullen bursting strength at 1/8″ and 99% recovery within 1 minute after 10% deflection. Working from sheet and slit rolls in 1/8″ and 3/16″ thickness, H-O Products converts white F-1 felt into bearing seals, wicks, printing pads and furniture pads to your drawing by die-cutting, and by kiss-cutting on liner when pressure-sensitive adhesive is laminated to one face. H-O Products is an ISO 9001:2015 certified organization and has converted gasket, thermal and insulation materials since 1971. Samples can ship in 24 hours for common die-cut configurations on materials we keep on hand; standard production is 2 weeks.

Key Properties

  • Durometer / Hardness (Shore A): 30 - 40 — ASTM D461
  • Tensile Strength (min): 500 psi — ASTM D412
  • Compressibility @ 10% Deflection: 21 psi — ASTM D461
  • Specific Gravity: 0.34 — ASTM D461
  • Temperature Range: -80°F to 200°F — —
  • Liquid Absorption: > 175% (1.0 sp gr) — ASTM D461

F-10 SAE Pressed Felt

F-10 SAE Pressed Felt is a soft, highly absorbent white wool felt (SAE J314 F-10, ASTM D2475 18R1, Federal Specification C-F-206G 9R1) with 0.18 g/cm³ nominal specific density, 15–25 Shore A hardness, 225 psi minimum tensile strength and liquid absorption above 400% by weight. It is used for anti-squeak and anti-rattle pads, priming pipe cleaning, wire lubrication, equestrian padding, filtration and machine packaging. High dynamic stress endurance and 75–150 cfm/sq ft/0.5″ H₂O air permeability (at 1/16″) suit it to padding and filtering, though the datasheet notes it will break down quicker in use than an F-5. From sheet and 72″ (1.83 m) wide rolls, H-O Products converts F-10 felt into anti-rattle pads, lubrication and cleaning pads, filter pieces and padding cut to your drawing, with or without pressure-sensitive adhesive. Standard thicknesses run from 1/8″ to 1″ (3.17 mm to 25.4 mm), in white. H-O Products is an ISO 9001:2015 certified organization and has converted gasket, thermal and insulation materials since 1971. Samples can ship in 24 hours for common die-cut configurations on materials we keep on hand; standard production is 2 weeks.

Key Properties

  • Hardness Range (Shore A): 15–25 — ASTM D2240
  • Tensile Strength (min): 225 psi — ASTM D412
  • Compressibility (10% defl.): 4 psi — ASTM D461
  • Nominal Specific Density: 0.18 g/cm³ — —
  • Temperature Range: -80°F to +200°F | -62°C to +93°C — —
  • Liquid Absorption — By Weight: > 400% (1.0 sp gr) — ASTM D461

F-11 SAE Pressed Felt

F-11 SAE Pressed Felt is a pressed wool felt with a minimum of 87% wool content (SAE Specification J314 F-11, ASTM Classification D2475 18R2, Federal Specification C-F-206G 9R2), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 200 psi minimum tensile strength, 4 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection. Supplied in grey with a standard roll width of 72" (1.83 m) in thicknesses from 1/8" to 1". On a firmness scale of 1–10, the F-11 rates a 5. The TDS notes it will break down quicker in use than an F-7.

Key Properties

  • Hardness Range (Shore A): 15–25 — ASTM D2240
  • Tensile Strength (min): 200 psi — ASTM D412
  • Compressibility (10% defl.): 4 psi — ASTM D461
  • Nominal Specific Density: 0.18 g/cm³ — —
  • Temperature Range: -80°F to +200°F | -62°C to +93°C — —
Liquid Absorption — By Weight: > 375% (1.0 sp gr) — ASTM D461

F-2 SAE Pressed Felt

F-2 SAE Pressed Felt is a firm, dense pink wool felt listed as SAE J314 F-2, ASTM D2475 34R1 and Federal Specification C-F-206G 16R2, with 500 psi minimum tensile strength, 30–40 Shore A hardness, 0.34 g/cm³ nominal specific density and a −80°F to +200°F (−62°C to +93°C) temperature range. It is made into washers, bushings, spacers, wicks, door bumpers, vibration mountings and polishing blocks, and it absorbs and holds low-viscosity oil well. It rates 9 on the datasheet's 1–10 firmness scale and recovers 99% within 1 minute after 10% deflection. H-O Products die-cuts F-2 felt into washers, bushings, wicks, spacers and bumpers to your drawing, converting from sheet and 60″ (1.52 m) wide rolls, with pressure-sensitive adhesive on one face when the part mounts in place. Standard thicknesses run from 1/8″ to 1″ (3.17 mm to 25.4 mm) in pink, and the datasheet gives thickness and weight tolerances for every gauge. H-O Products is an ISO 9001:2015 certified organization and has converted gasket, thermal and insulation materials since 1971. Samples can ship in 24 hours for common die-cut configurations on materials we keep on hand; standard production is 2 weeks.

Key Properties

  • Hardness Range (Shore A): 30–40 — ASTM D2240
  • Tensile Strength (min): 500 psi — ASTM D412
  • Compressibility (10% defl.): 21 psi — ASTM D461
  • Nominal Specific Density: 0.34 g/cm³ — —
  • Temperature Range: -80°F to +200°F | -62°C to +93°C — —
  • Liquid Absorption — By Weight: > 175% (1.0 sp gr) — ASTM D461

F-3 SAE Pressed Felt

F-3 SAE Pressed Felt is a strong, durable pressed wool felt with a minimum of 85% wool content (SAE Number F-3, NTA Number 34R3, Commercial Standard Grade 16R3), rated for service from -80°F to 200°F. It delivers 400 psi minimum tensile strength, 13 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection per ASTM D461. The material provides excellent abrasion, oxidation, solvent, and UV resistance and is supplied in gray.

Key Properties

  • Durometer / Hardness (Shore A): 30 - 40 — ASTM D461
  • Tensile Strength (min): 400 psi — ASTM D412
  • Compressibility @ 10% Deflection: 13 psi — ASTM D461
  • Specific Gravity: 0.34 — ASTM D461
  • Temperature Range: -80°F to 200°F — —
  • Liquid Absorption: > 190% (1.0 sp gr) — ASTM D461

F-5 SAE Pressed Felt

F-5 SAE Pressed Felt is a pressed wool felt with a minimum of 95% wool content (SAE Specification J314 F-5, ASTM Classification D2475 26R1, Federal Specification C-F-206G 12R1), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 400 psi minimum tensile strength, 6 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection. Supplied in white with a standard roll width of 72" (1.83 m) in thicknesses from 1/8" to 1". On a firmness scale of 1–10, the F-5 rates a 7.

Key Properties

  • Hardness Range (Shore A): 20–30 — ASTM D2240
  • Tensile Strength (min): 400 psi — ASTM D412
  • Compressibility (10% defl.): 6 psi — ASTM D461
  • Nominal Specific Density: 0.26 g/cm³ — —
  • Temperature Range: -80°F to +200°F | -62°C to +93°C — —
Liquid Absorption — By Weight: > 250% (1.0 sp gr) — ASTM D461

F-50 SAE Pressed Felt

F-50 SAE Pressed Felt is a strong, durable thin-gauge pressed wool felt with a minimum of 95% wool content (SAE Number F-50, NTA Number 34R1, Commercial Standard Grade 16R1X), rated for service from -80°F to 200°F. It delivers 500 psi minimum tensile strength, 99% recovery within 1 minute after 10% deflection, and a Mullen bursting strength of 225 psi. Available in white in thin precision thicknesses of 3/64", 1/16", 5/64", and 3/32", it is suited for bearing seals, strips, wicks, industrial filters, and uses requiring thin precision felt.

Key Properties

  • Tensile Strength (min): 500 psi — ASTM D412
  • Mullen Bursting Strength (1/8"): 225 psi — ASTM D461
  • Recovery Within 1 Minute After 10% Deflection: 99% — ASTM D461
  • Specific Gravity: 0.34 — ASTM D461
  • Temperature Range: -80°F to 200°F — —
  • Liquid Absorption: > 180% (1.0 sp gr) — ASTM D461

F-51 SAE Pressed Felt

F-51 SAE Pressed Felt is a durable thin-gauge pressed wool felt with a minimum of 92% wool content (SAE Number F-51, NTA Number 34R3, Commercial Standard Grade 16R3X), rated for service from -80°F to 200°F. It delivers 300 psi minimum tensile strength, 99% recovery within 1 minute after 10% deflection, and a Mullen bursting strength of 225 psi. Available in grey in thin precision thicknesses of 3/64", 1/16", 5/64", and 3/32", it is suited for gaskets, liners, bearing seals, and applications where precision tolerance, life, and quality are not as exacting.

Key Properties

  • Tensile Strength (min): 300 psi — ASTM D412
  • Mullen Bursting Strength (1/8"): 225 psi — ASTM D461
  • Recovery Within 1 Minute After 10% Deflection: 99% — ASTM D461
  • Specific Gravity: 0.34 — ASTM D461
  • Temperature Range: -80°F to 200°F — —
Liquid Absorption: > 170% (1.0 sp gr) — ASTM D461

F-55 SAE Pressed Felt

F-55 SAE Pressed Felt is a pressed wool felt with a minimum of 75% wool content (SAE Specification J314 F-55, ASTM Classification D2475 26R3, Federal Specification C-F-206G 12R3X), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 200 psi minimum tensile strength and 99% recovery within 1 minute after 10% deflection. Supplied in grey with a standard roll width of 60" (1.52 m), it is available only in thin precision thicknesses of 1/16" and 3/32". The F-55 has the same specifications as F-7 but denotes a thickness less than 1/8" and is rated 9 on a firmness scale of 1–10 for high resilience. Due to its high resilience, F-55 is recommended for uses where surface integrity is needed and color is required.

Key Properties

  • Hardness Range (Shore A): — — ASTM D2240
  • Tensile Strength (min): 200 psi — ASTM D412
  • Compressibility (10% defl.): — — ASTM D461
  • Nominal Specific Density: 0.26 g/cm³ — —
  • Temperature Range: -80°F to +200°F | -62°C to +93°C — —
  • Liquid Absorption — By Weight: > 225% (1.0 sp gr) — ASTM D461

F-7 SAE Pressed Felt

F-7 SAE Pressed Felt is a pressed wool felt with a minimum of 80% wool content (SAE Specification J314 F-7, ASTM Classification D2475 26R3, Federal Specification C-F-206G 12R3), rated for service from -80°F to +200°F (-62°C to +93°C). It delivers 250 psi minimum tensile strength, 6 psi compressibility at 10% deflection, and 99% recovery within 1 minute after 10% deflection. Supplied in grey with a standard roll width of 72" (1.83 m) in thicknesses from 1/8" to 1". On a firmness scale of 1–10, the F-7 rates a 7.

Key Properties

  • Hardness Range (Shore A): 20–30 — ASTM D2240
  • Tensile Strength (min): 250 psi — ASTM D412
  • Compressibility (10% defl.): 6 psi — ASTM D461
  • Nominal Specific Density: 0.26 g/cm³ — —
  • Temperature Range: -80°F to +200°F | -62°C to +93°C — —
  • Liquid Absorption — By Weight: > 225% (1.0 sp gr) — ASTM D461

SAE F-26 Pressed Felt

SAE F-26 Pressed Felt is a needled wool felt with a minimum of 45% wool content, rated 3 on a firmness scale of 1–10, designed for packing, padding, and sound absorption in non-mechanical applications. It delivers 99% recovery within one minute after 10% deflection and a noise reduction coefficient of 0.65 at 1" thickness, with a service temperature range of -80°F to +200°F (-62°C to +93°C). Standard widths of 72" are available in thicknesses from 1/8" to 1".

Key Properties

  • Hardness Range (Shore A): 5–15 (ASTM D2240)
  • Compressibility (10% defl.): 1 psi (ASTM D461)
  • Recovery (within 1 min after 10% defl.): 99% (ASTM D461)
  • Nominal Specific Density: 0.15 g/cm³
  • Temperature Range: -80°F to +200°F | -62°C to +93°C
Noise Reduction Coefficient (1"): 0.65 (ASTM D461)