Thermal & EMI
2368 Conductive Silicone
70 Shore A General Purpose Solid Silicone
BISCO® HT-1270 is a 70 ±5 Shore A solid silicone elastomer engineered for applications requiring maximum firmness and reduced material deflection under sustained compression and elevated temperature exposure. Rated from −80°F to 425°F, HT-1270 maintains ≤25% compression set after 70 hours at 302°F, supporting reliable sealing performance in high-load environments.Key Properties
- Hardness: 70 ±5 Shore A
- Tensile Strength: 1050 psi
- Elongation: ≥125%
- Compression Set: ≤25% (70 hrs @ 302°F, 25%)
- Specific Gravity: 1.29 g/cc
- Recommended Service Temperature: −80°F to 425°F
2368-65
2368 is a 65 Shore A silicone elastomer filled with silver-plated aluminum particles, designed to meet the requirements of MIL-G-83528C-Type B and available in thicknesses of 1/64", 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4". It delivers shielding effectiveness of >114 dB (20 MHz–10 GHz, E-field) per MIL-DTL-83528, a volume resistivity of 0.00 ohm-cm per MIL-DTL-83528, and a thermal stability range of -76°F to 428°F. It is part of the M83528 Qualified Product List (QPL) from the Defense Logistics Agency (DLA).
Key Properties
- Hardness Shore A: 65 (ASTM D2240)
- Tensile Strength: 240 psi (ASTM D412)
- Elongation: 280% (ASTM D412)
- Volume Resistivity: 0.00 ohm-cm (MIL-DTL-83528)
- Specific Gravity: 2.05 (ASTM D792)
- Thermal Stability Range: -76°F to 428°F
2476-65
2476-65 DARK BLUE is a 65 Shore A silicone elastomer filled with large particle-size silver-plated aluminum, supplied as fully cured electrically conductive sheet stock, continuous extrusion profiles, or as a ready-to-mold compound. It delivers a volume resistivity of 0.0009 ohm/cm (0.008 max specification per ASTM D991) and a thermal conductivity of 1.9 W/m·K — the highest thermal conductivity in this group of conductive silicone elastomers. Thermal stability range is -60°C to 220°C.
Key Properties
- Hardness Shore A (58–72 range): 65 (ASTM D2240)
- Tensile Strength (100 minimum): 150 psi (ASTM D412)
- Elongation % (100 min): 350% (ASTM D412)
- Volume Resistivity ohm/cm (0.008 max): 0.0009 ohm/cm (ASTM D991)
- Specific Gravity (1.75–2.25): 2.02 (ASTM D792)
- Thermal Stability Range: -60°C – 220°C
2486
2486 is a 70 durometer fluorosilicone elastomer filled with silver-plated aluminum particles, meeting the requirements of MIL-DTL-83528 Type D and listed on the M83528 Qualified Product List (QPL), Notification of Qualification VQ (VQH-16-029974). It is available in thicknesses of 1/64", 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4", and is identified on the TDS as a replacement for Parker Chomerics CHO-SEAL® 1287. Shielding effectiveness is >90.8 dB (20 MHz–10 GHz, E-field) and volume resistivity is 0.0016 ohm-cm, both per MIL-DTL-83528.
Key Properties
- Hardness Shore A: 74 (ASTM D2240)
- Tensile Strength: 340 psi (ASTM D412)
- Elongation: 112% (ASTM D412)
- Volume Resistivity (Pressure Probe): 0.0016 ohm-cm (MIL-DTL-83528)
- Specific Gravity: 2.19 (ASTM D792)
- Thermal Stability Range: -154.58°F / -51.7°F (TR-10 / TR-70, ASTM D1329)
2529 Corrosion Resistant Silicone
2529 is a 68 durometer silicone elastomer filled with nickel-plated aluminum particles, available as fully cured electrically conductive sheet stock, continuous extrusion profiles, or as a ready-to-mold compound. It delivers shielding effectiveness of >110 dB (20 MHz–10 GHz, E-field) per MIL-DTL-83528, a volume resistivity of 0.08 ohm/cm (0.150 max per ASTM D991), a thermal conductivity of 1.6 W/m·K, and galvanic corrosion of 0.08% per 168-hour salt spray (ASTM B117). Thermal stability range is -60°C to 220°C. Data was generated with the Varox catalyst system.
Key Properties
- Hardness Shore A (58–78 range): 68 (ASTM D2240)
- Tensile Strength (150 minimum): 200 psi (ASTM D412)
- Elongation % (100 min): 320% (ASTM D412)
- Volume Resistivity ohm/cm (0.150 max): 0.08 ohm/cm (ASTM D991)
- Specific Gravity (1.60–2.10): 2.05 (ASTM D792)
- Thermal Stability Range: -60°C – 220°C
2551 Corrosion Resistant Fluorosilicone
2551 is a 72 durometer, fuel- and solvent-resistant fluorosilicone elastomer filled with nickel-plated aluminum particles, available as fully cured electrically conductive sheet stock, continuous extrusion profiles, or as a ready-to-mold compound. It delivers shielding effectiveness of >112 dB (20 MHz–10 GHz) and >100 dB (10 GHz–40 GHz), both per MIL-DTL-83528, a volume resistivity of 0.03 ohm/cm (0.250 max), a compression set of 18% (70 hrs @ 100°C, 30 max), and galvanic corrosion of 0.10% per 168-hour salt spray (ASTM B117). Thermal stability range is -60°C to 220°C.
Key Properties
- Hardness Shore A (62–82 range): 69 (ASTM D2240)
- Tensile Strength (150 minimum): 200 psi (ASTM D412)
- Elongation % (50 min): 350% (ASTM D412)
- Compression Set % 70 hrs @ 100°C (30 max): 18 (ASTM D395)
- Volume Resistivity ohm/cm (0.250 max): 0.03 ohm/cm (ASTM D991)
- Thermal Stability Range: -60°C – 220°C
2569
2569 is a silver-plated copper filled conductive silicone elastomer with a Shore A hardness of 70, meeting the requirements of MIL-DTL-83528 Type A and listed on the M83528 Qualified Product List (QPL), Notification of Qualification VQ (VQH-21-036367). It is available in thicknesses of 1/64", 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4", and is identified on the TDS as a replacement for Parker Chomerics CHO-SEAL® 1215. Shielding effectiveness is >145 dB (20 MHz–10 GHz, E-field) — the highest in this series — and volume resistivity is 0.0015 ohm-cm, both per MIL-DTL-83528.
Key Properties
- Hardness Shore A: 70 (ASTM D2240)
- Tensile Strength: 390 psi (ASTM D412)
- Elongation: 150% (ASTM D412)
- Volume Resistivity: 0.0015 ohm-cm (MIL-DTL-83528)
- Specific Gravity: 3.40 (ASTM D792)
- Thermal Stability Range: -67°F to 257°F
2571-85
2571 is a high durometer silver-plated copper filled conductive silicone elastomer with a Shore A hardness of 85, meeting the requirements of MIL-DTL-83528 Type K and listed on the M83528 Qualified Product List (QPL), Notification of Qualification VQH-21-036470. It is available in thicknesses of 1/64", 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4", and is identified on the TDS as a replacement for Parker Chomerics CHO-SEAL® 1212. Volume resistivity is 0.0006 ohm-cm per MIL-DTL-83528 — the lowest volume resistivity in this product group — and tensile strength is 550 psi, the highest in the group.
Key Properties
- Hardness Shore A: 85 (ASTM D2240)
- Tensile Strength: 550 psi (ASTM D412)
- Elongation: 120% (ASTM D412)
- Volume Resistivity: 0.0006 ohm-cm (MIL-DTL-83528)
- Specific Gravity: 3.50 (ASTM D792)
- Thermal Stability Range: -49°F to -193°F
2573-75
2573 is a silver-plated copper filled conductive fluorosilicone elastomer with a Shore A hardness of 75, meeting the requirements of MIL-DTL-83528 Type C and listed on the M83528 Qualified Product List (QPL), Notification of Qualification VQH-22-036726. It is available in thicknesses of 1/64", 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4", and is identified on the TDS as a replacement for Parker Chomerics CHO-SEAL® 1217. Volume resistivity is 0.002 ohm-cm and shielding effectiveness is >125 dB (20 MHz–10 GHz, E-field), both per MIL-DTL-83528. Fluid Immersion passes MIL-DTL-83528 with a maximum volume swell of 25% and maximum change in hardness of 15 Shore A units.
Key Properties
- Hardness Shore A: 75 (ASTM D2240)
- Tensile Strength: 440 psi (ASTM D412)
- Elongation: 140% (ASTM D412)
- Volume Resistivity: 0.002 ohm-cm (MIL-DTL-83528)
- Specific Gravity: 3.55 (ASTM D792)
- Thermal Stability Range: -67°F to 257°F
482F-75
482F-75 is a 75 durometer fluorosilicone elastomer filled with silver-plated nickel, available as fully cured electrically conductive sheet stock or as a ready-to-mold compound. It delivers a volume resistivity of 0.001 ohm-cm (0.005 max specification per ASTM D991) and a thermal stability range of -60°C to 200°C. The material is engineered to provide high electrical conductivity along with excellent resistance to fuels and solvents. Data was generated with the Varox catalyst system.
Key Properties
- Hardness Shore A (68–82 range): 75 (ASTM D2240)
- Tensile Strength (200 minimum): 265 psi (ASTM D412)
- Elongation % (100 min): 285% (ASTM D412)
- Volume Resistivity ohm-cm (0.005 max): .001 ohm-cm (ASTM D991)
- Specific Gravity: 4.3 (ASTM D792)
502-30
502-30 is a 30 Shore A silicone elastomer filled with nickel-coated graphite, available as a ready-to-mold compound, fully cured electrically conductive sheet stock, and, for select formulations, in continuous roll form. It delivers a volume resistivity of 0.125 ohm-cm (1.5 max specification) and a thermal stability range of -60°C to 200°C. Tensile strength is 182 psi and elongation is 900%.
Key Properties
- Durometer / Hardness (Shore A): 30 (25–35 range)
- Tensile Strength: 182 psi (100 minimum)
- Elongation: 900% (400 minimum)
- Volume Resistivity: 0.125 ohm-cm (1.5 max)
- Specific Gravity: 1.71
- Thermal Stability Range: -60°C – 200°C
502-40
502-40 is a 40 Shore A silicone elastomer filled with nickel-coated graphite, supplied as a ready-to-mold compound, fully cured electrically conductive sheets, and continuous rolls. It delivers shielding effectiveness of >113 dB (20 MHz–10 GHz, E-field) across compound and sheet forms, a volume resistivity of 0.05 max ohm/cm (compound), and a thermal stability range of -60°C to 220°C. Tensile strength is 120 psi and elongation is 800%.
Key Properties
- Durometer / Hardness (Shore A): 40 (35–45 range)
- Tensile Strength: 120 psi (100 minimum)
- Elongation: 800% (200 minimum)
- Volume Resistivity — Compound: 0.05 max ohm/cm
- Specific Gravity (1.85–2.00): 1.9
- Thermal Stability Range: -60°C – 220°C
502-40-V0
502-40-V0 is a 40 durometer, flame-retardant, electrically conductive silicone elastomer filled with nickel-coated graphite and compliant with UL 94 V-0, available in sheet stock or continuous rolls with or without conductive pressure-sensitive adhesive (PSA), in thicknesses from 0.010 in. to 0.250 in. It delivers shielding effectiveness of >114 dB (20 MHz–10 GHz, E-field) with a volume resistivity of 1.0 max ohm-cm (0.5 typical), and a thermal stability range of -60°C to 220°C. The material has been tested in accordance with ASTM E595 outgassing requirements both with and without conductive PSA applied.
Key Properties
- Durometer / Hardness (Shore A): 35–45
- Tensile Strength: 100 min psi
- Elongation: 200 min %
- Volume Resistivity: 1.0 max ohm-cm (0.5 typical)
- Specific Gravity: 1.9 typical
- Thermal Stability Range: -60°C – 220°C
502-60-V0
502-60-V0 is a 60 durometer, flame-retardant, electrically conductive silicone elastomer filled with nickel-coated graphite and compliant with UL 94 V-0, available in sheet stock or continuous rolls with or without conductive pressure-sensitive adhesive (PSA), in thicknesses from 0.010 in. to 0.250 in. It delivers shielding effectiveness of >117 dB (20 MHz–10 GHz, E-field) with a volume resistivity of 1.0 max ohm-cm (0.3 typical), and a thermal stability range of -60°C to 220°C. The material has been tested in accordance with ASTM E595 outgassing requirements both with and without conductive PSA applied.
Key Properties
- Durometer / Hardness (Shore A): 55–65
- Tensile Strength: 150 min psi
- Elongation: 100 min %
- Volume Resistivity: 1.0 max ohm-cm (0.3 typical)
- Specific Gravity: 2.0 typical
- Thermal Stability Range: -60°C – 220°C
502-65
502-65 is a 65 Shore A silicone elastomer filled with nickel-coated graphite, supplied in both continuous roll and sheet form. It delivers shielding effectiveness of >113 dB (20 MHz–10 GHz, E-field), a volume resistivity of 0.1 ohm/cm MAX (measured on the finished product), and a thermal stability range of -55°C to 200°C. Tensile strength is 240 psi and elongation is 530%.
Key Properties
- Durometer / Hardness (Shore A): 65 (58–68 range)
- Tensile Strength: 240 psi (200 minimum)
- Elongation: 530% (200 minimum)
- Volume Resistivity: 0.1 ohm/cm MAX
- Specific Gravity: 1.93
- Thermal Stability Range: -55°C – 200°C
502F-50
502F-50 is a 50 durometer fluorosilicone elastomer filled with nickel-coated graphite, available as a ready-to-mold compound, fully cured electrically conductive sheet stock, continuous extrusion profiles, and, for select formulations, continuous rolls. It delivers shielding effectiveness of >113 dB (100 MHz–10 GHz, E-field), a volume resistivity of 0.015 ohm/cm (0.1 max), and a thermal stability range of -55°C to 200°C. Data was generated using ASTM test methods and procedures with the Varox catalyst system.
Key Properties
- Hardness Shore A (45–55 range): 51 (ASTM methods per TDS)
- Tensile Strength (100 minimum): 130 psi
- Elongation % (200 minimum): 477%
- Volume Resistivity ohm/cm (0.1 max): .015 ohm/cm
- Specific Gravity: 2.13
- Thermal Stability Range: -55°C – 200°C
502F-60
502F-60 is a 60 durometer fluorosilicone elastomer filled with nickel-coated graphite, supplied as a ready-to-mold compound, fully cured electrically conductive sheet stock, continuous extrusion profiles, and, for select formulations, continuous rolls. It delivers shielding effectiveness of >113 dB (compound and sheets) and >100 dB (rolls) from 200 MHz to 10 GHz (E-field), with volume resistivity of 0.05 ohm/cm (compound and sheets) and 0.10 ohm/cm (rolls), and a thermal stability range of -55°C to 200°C. Data was generated with the DBPH catalyst system.
Key Properties
- Hardness Shore A (58–68 range): 60 (ASTM D2240)
- Tensile Strength (200 minimum): 225 psi (ASTM D412)
- Elongation % (200 minimum): 400% (ASTM D412)
- Volume Resistivity ohm/cm (0.1 max) — Compound/Sheets: .05 ohm/cm (ASTM D991)
- Specific Gravity (2.10–2.25): 2.20 (ASTM D792)
- Thermal Stability Range: -55°C – 200°C
502F-80
502F-80 is an 80 durometer nickel-coated graphite filled fluorosilicone elastomer, supplied as ready-to-mold compound, fully cured conductive sheet stock, continuous extrusion profiles, or, for some formulations, continuous rolls. It delivers shielding effectiveness of >113 dB (200 MHz–10 GHz, E-field) per MIL-DTL-83528, a volume resistivity of 0.015 ohm/cm (0.1 max per ASTM D991), and a thermal stability range of -55°C to 200°C. With a Tear "B" of 90 ppi and tensile strength of 290 psi, it is the highest durometer and highest tear resistance grade in the 502F-series. Data was generated with the DBPH catalyst system.
Key Properties
- Hardness Shore A (75–85 range): 80 (ASTM D2240)
- Tensile Strength (200 minimum): 290 psi (ASTM D412)
- Elongation % (100 minimum): 200% (ASTM D412)
- Volume Resistivity ohm/cm (0.1 max): .015 ohm/cm (ASTM D991)
- Specific Gravity: 2.37 (ASTM D792)
- Thermal Stability Range: -55°C – 200°C
550-70 Corrosion Resistant Fluorosilicone
550-70 PASSIVATED is a corrosion-resistant, electrically conductive fluorosilicone elastomer filled with silver-plated aluminum, available as fully cured conductive sheet stock, continuous extrusion profiles, or as a ready-to-mold compound, and engineered to meet the shielding requirements specified in MIL-G-83528. It delivers shielding effectiveness of >125 dB (20 MHz–10 GHz, >90 dB specification) per MIL-DTL-83528, a volume resistivity of 0.005 ohm/cm (0.012 max per ASTM D991), a compression set of 29% (70 hours at 100°C, 30 max per ASTM D395 M-B), and a compression deflection of 6% (3.5% minimum per ASTM D575). Data was generated with the Varox catalyst system.
Key Properties
- Hardness Shore A (63–77 range): 70 (ASTM D2240)
- Tensile Strength (180 minimum): 330 psi (ASTM D412)
- Elongation % (Report): 245% (ASTM D412)
- Compression Set % (30 max.): 29% — 70 hours at 100°C (ASTM D395 M-B)
- Volume Resistivity ohm/cm (0.012 max.): .005 ohm/cm (ASTM D991)
- Thermal Stability Range: -60°C – 220°C
A-10 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-10 PS is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding, combining a 0.00035" aluminum foil with a 0.0015" acrylic pressure-sensitive adhesive in a 0.0025" +/- 10% total construction. It delivers signal attenuation of 95 dB @ 100 MHz, a peel strength of 32 oz./inch of width, and a dielectric strength of 3,900 volts. The tape is supplied with a 90 lb. release liner for clean application and die-cutting.
Key Properties
- Peel Strength: 32 oz./inch of width (ASTM-D-1000)
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 12,000 p.s.i. (ASTM-D-882)
- Dielectric Strength: 3,900 volts (ASTM D149)
- Total Thickness: 0.0025" +/- 10% (ASTM-D-3652)
- Elongation at Break: 70% (ASTM-D-882)
A-10 NPS Aluminum Foil / Polyester Film EMI-RFI Shielding Laminate
A-10 NPS is an aluminum foil and polyester film laminate engineered for EMI and RFI shielding, providing signal attenuation of 95 dB at 100 MHz. Supplied without adhesive or liner, the 0.001" laminate delivers a dielectric strength of 3,900 volts, a tensile strength of 12,000 p.s.i., and elongation at break of 70%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 12,000 P.S.I. (ASTM-D-882)
- Elongation at Break: 70% (ASTM-D-882)
- Dielectric Strength: 3,900 volts (ASTM D149)
- Total Thickness: 0.001" (ASTM-D-374)
- Aluminum Foil Thickness: 0.00035"
A-15 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-15 PS is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding of electronic components, built to a total thickness of 0.0030" +/- 10% from a 0.00035" aluminum foil, 0.00092" polyester film, and 0.0015" acrylic pressure-sensitive adhesive. It delivers a peel strength of 40 oz./inch of width and an elongation at break of 75%. The tape is supplied with a 90 lb. release liner.
Key Properties
- Peel Strength: 40 oz./inch of width (ASTM-D-1000)
- Tensile Strength: 12,000 p.s.i. (ASTM-D-882)
- Total Thickness: 0.0030" +/- 10% (ASTM-D-3652)
- Elongation at Break: 75% (ASTM-D-882)
- Release Liner: 90 lb.
- Color: Silver
A-15 NPS Aluminum Foil / Polyester Film EMI-RFI Shielding Laminate
A-15 NPS is an aluminum foil and polyester film laminate engineered for EMI and RFI shielding, providing signal attenuation of 95 dB at 100 MHz. Supplied without adhesive or liner, the 0.0015" laminate delivers a dielectric strength of 5,000 volts, a tensile strength of 12,000 P.S.I., and elongation at break of 75%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 12,000 P.S.I. (ASTM-D-882)
- Elongation at Break: 75% (ASTM-D-882)
- Dielectric Strength: 5,000 volts (ASTM D149)
- Total Thickness: 0.0015" (ASTM-D-374)
- Polyester Film Thickness: 0.00092"
A-16 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-16 PS is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding, providing signal attenuation of 112 dB @ 100 MHz from a compact 0.0026" +/- 10% construction (without liner) built from a 0.001" aluminum foil and 0.001" acrylic pressure-sensitive adhesive. It delivers a peel strength greater than 32 oz./inch of width and a dielectric strength of 3,900 volts, with a tensile strength of 10,000 p.s.i. and 25% elongation at break. The tape is supplied with a 90 lb. release liner.
Key Properties
- Peel Strength: >32 oz./inch of width (ASTM-D-1000)
- Signal Attenuation: 112 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 10,000 P.S.I. (ASTM-D-882)
- Dielectric Strength: 3,900 volts (ASTM D149)
- Thickness w/o Liner: 0.0026" +/- 10% (PSTC-33)
- Elongation at Break: 25% (ASTM-D-882)
A-21 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-21 PS is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding of electronic components, built to a total thickness of 0.0036" from a 0.001" aluminum foil, 0.00092" polyester film, and 0.001" acrylic pressure-sensitive adhesive. It delivers a peel strength greater than 32 oz./inch of width, a tensile strength of 5,800 P.S.I., and an elongation at break of 75%. The tape is supplied with a 90 lb. release liner.
Key Properties
- Peel Strength: >32 oz./inch of width (ASTM-D-1000)
- Tensile Strength: 5,800 P.S.I. (ASTM-D-882)
- Total Thickness: 0.0036" (PSTC-33)
- Elongation at Break: 75% (ASTM-D-882)
- Release Liner: 90 lb.
- Color: Silver
A-21 NPS Aluminum Foil / Polyester Film EMI-RFI Shielding Laminate
A-21 NPS is an aluminum foil and polyester film laminate engineered for EMI and RFI shielding of electronic components. Supplied without adhesive or liner, the 0.0021" laminate delivers a tensile strength of 5,800 P.S.I. and elongation at break of 75%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Tensile Strength: 5,800 P.S.I. (ASTM-D-882)
- Elongation at Break: 75% (ASTM-D-882)
- Total Thickness: 0.0021" (PSTC-33)
- Aluminum Foil Thickness: 0.001"
- Polyester Film Thickness: 0.00092"
- Color: Silver
A-25 Aluminum Foil / Polyester Film EMI-RFI Shielding Laminate
A-25 is an aluminum foil and polyester film laminate engineered for EMI and RFI shielding of electronic components, providing signal attenuation of 95 dB at 100 MHz. Supplied without adhesive or liner, the 0.0025" laminate delivers a dielectric strength of 8,800 volts, tensile strength of 14,500 P.S.I., and elongation at break of 90%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 14,500 P.S.I. (ASTM-D-882)
- Elongation at Break: 90% (ASTM-D-882)
- Dielectric Strength: 8,800 volts (ASTM D149)
- Total Thickness: 0.0025" +/- 10% (PSTC-33)
- Polyester Film Thickness: 0.002"
A-25 90-68 Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-25 90-68 is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding of electronic components, providing signal attenuation of 95 dB @ 100 MHz from a 0.0040" +/- 10% construction built with a 0.00035" aluminum foil, 0.002" polyester film, and 0.0015" acrylic pressure-sensitive adhesive. It delivers a peel strength greater than 32 oz./inch of width initial and a dielectric strength of 8,800 volts, with a tensile strength of 14,500 P.S.I. and 90% elongation at break. The tape is supplied with a 90 lb. release liner.
Key Properties
- Peel Strength: >32 oz/inch of width initial (ASTM-D-1000)
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 14,500 P.S.I. (ASTM-D-882)
- Dielectric Strength: 8,800 volts (ASTM D149)
- Total Thickness: 0.0040" +/- 10% (PSTC-33)
- Elongation at Break: 90% (ASTM-D-882)
A-31 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-31 PS is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding of electronic components, built to a thickness of 0.0046" +/- 10% (minus liner) from a 0.001" aluminum foil, 0.002" polyester film, and 0.0015" acrylic pressure-sensitive adhesive. It delivers a peel strength greater than 32 oz./inch of width, a tensile strength of 16,200 psi, and 100% elongation at break. The tape is supplied with a 90 lb. release liner and is manufactured in compliance with FCC Regulations, Docket Number 20780, Volume II, Part 15, Subpart 5.
Key Properties
- Peel Strength: >32 oz./inch of width (ASTM-D-1000)
- Tensile Strength: 16,200 psi (ASTM-D-882)
- Thickness (minus liner): 0.0046" +/- 10% (PSTC-33)
- Elongation: 100% (ASTM-D-882)
- Release Liner: 90 lb.
- Color: Silver
A-31 NPS Aluminum Foil / Polyester Film EMI-RFI Shielding Laminate
A-31 NPS is an aluminum foil and polyester film laminate engineered for EMI and RFI shielding of electronic components, providing signal attenuation of 112 dB at 100 MHz. Supplied without adhesive or liner, the 0.0031" laminate delivers a dielectric strength of 8,800 volts, tensile strength of 16,200 psi, and elongation of 100%. The laminate is manufactured in compliance with FCC Regulations, Docket Number 20780, Volume II, Part 15, Subpart 5.
Key Properties
- Signal Attenuation: 112 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 16,200 psi (ASTM D-882)
- Elongation: 100% (ASTM-D-882)
- Dielectric Strength: 8,800 volts (ASTM D149)
- Total Thickness: 0.0031" +/- 10% (PSTC-33)
- Aluminum Foil Thickness: 0.001"
A-35 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-35 PS is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding, providing signal attenuation of 95 dB @ 100 MHz from a 0.005 inch +/- 10% construction built with a 0.00035" aluminum foil, 0.003" polyester film, and 0.0015" acrylic pressure-sensitive adhesive. It delivers a peel strength of 32 oz./inch of width minimum and a dielectric strength of 10,200 volts, with a tensile strength of 20,000 p.s.i. and 90% elongation at break. The tape is supplied with a 90 lb. release liner.
Key Properties
- Peel Strength: 32 oz./inch of width min. (ASTM-D-1000)
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 20,000 p.s.i. (ASTM-D-882)
- Dielectric Strength: 10,200 volts (ASTM D149)
- Total Thickness: 0.005 inch +/- 10% (ASTM-D-3652)
- Elongation at Break: 90% (ASTM-D-882)
A-35 NPS Aluminum Foil / Polyester Film EMI-RFI Shielding Laminate
A-35 NPS is an aluminum foil and polyester film laminate engineered for EMI and RFI shielding, providing signal attenuation of 95 dB at 100 MHz. Supplied without adhesive or liner, the 0.0035" laminate delivers a dielectric strength of 10,200 volts, tensile strength of 16,000 P.S.I., and elongation at break of 90%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 16,000 P.S.I. (ASTM-D-882)
- Elongation at Break: 90% (ASTM-D-882)
- Dielectric Strength: 10,200 volts (ASTM D149)
- Total Thickness: 0.0035" (ASTM-D-374)
- Polyester Film Thickness: 0.003"
A-41 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-41 PS is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding, providing signal attenuation of 112 dB @ 100 MHz from a 0.0056" +/- 10% construction built with a 0.001" aluminum foil, 0.003" polyester film, and 0.0015" acrylic pressure-sensitive adhesive. It delivers a peel strength of 32 oz./inch of width minimum and a dielectric strength of 10,200 volts, with a tensile strength of 12,860 P.S.I. and 90% elongation at break. The tape is supplied with a 90 lb. release liner.
Key Properties
- Peel Strength: 32 oz./inch of width min. (ASTM-D-1000)
- Signal Attenuation: 112 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 12,860 P.S.I. (ASTM-D-882)
- Dielectric Strength: 10,200 volts (ASTM D149)
- Total Thickness: 0.0056" +/- 10% (ASTM-D-3652)
- Elongation at Break: 90% (ASTM-D-882)
A-41 NPS Aluminum Foil / Polyester Film EMI-RFI Shielding Laminate
A-41 NPS is an aluminum foil and polyester film laminate engineered for EMI and RFI shielding, providing signal attenuation of 112 dB at 100 MHz. Supplied without adhesive or liner, the laminate delivers a dielectric strength of 10,200 volts, tensile strength of 14,500 P.S.I., and elongation at break of 90%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 112 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 14,500 P.S.I. (ASTM-D-882)
- Elongation at Break: 90% (ASTM-D-882)
- Dielectric Strength: 10,200 volts (ASTM D149)
- Total Thickness: 0.0041" +/- 5% (ASTM-D-3652)
- Aluminum Foil Thickness: 0.001"
A-55 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-55 PS is an aluminum foil and polyester film laminate tape engineered for EMI and RFI shielding, providing signal attenuation of 95 dB @ 100 MHz from a 0.0070" +/- 5% construction built with a 0.00035" aluminum foil, 0.005" polyester film, and 0.0015" acrylic pressure-sensitive adhesive. It delivers a peel strength of 40 oz./inch of width and a dielectric strength of 13,500 volts, with a tensile strength of 18,000 P.S.I. minimum and 115% elongation at break. The tape is supplied with a 90 lb. release liner and is manufactured in compliance with FCC part sub-part J, Vol. 11, July 1981.
Key Properties
- Peel Strength: 40 oz./inch of width (ASTM-D-1000)
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 18,000 P.S.I. min. (ASTM-D-882)
- Dielectric Strength: 13,500 volts (ASTM D149)
- Total Thickness: 0.0070" +/- 5% (ASTM-D-3652)
- Elongation at Break: 115% (ASTM-D-882)
A-55 NPS Aluminum Foil / Polyester Film EMI-RFI Shielding Laminate
A-55 NPS is an aluminum foil and polyester film laminate engineered for EMI and RFI shielding, providing signal attenuation of 95 dB at 100 MHz. Supplied without adhesive or liner, the 0.005" laminate delivers a dielectric strength of 13,500 volts, tensile strength of 18,000 P.S.I. minimum, and elongation at break of 115%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 95 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 18,000 P.S.I. min. (ASTM-D-882)
- Elongation at Break: 115% (ASTM-D-882)
- Dielectric Strength: 13,500 volts (ASTM D149)
- Total Thickness: 0.005" +/- 5% (ASTM-D-374)
- Polyester Film Thickness: 0.005"
A-61 PS Aluminum Foil / Polyester Film EMI-RFI Shielding Tape
A-61 PS is an aluminum foil and polyester film laminate pressure-sensitive tape built from a 0.001" aluminum foil, 0.005" polyester film, and 0.0015" acrylic adhesive for a total construction of 0.0076" +/- 5%. It delivers signal attenuation of 112 dB @ 100 MHz, peel strength of 40 oz./inch of width, and dielectric strength of 13,500 volts. An exceptional 300% elongation at break allows the tape to conform to irregular or curved surfaces while maintaining shielding continuity.
Key Properties
- Peel Strength: 40 oz./Inch of Width (ASTM-D-1000)
- Signal Attenuation: 112dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 20,000 P.S.I. (ASTM-D-882)
- Dielectric Strength: 13,500 volts (ASTM D149)
- Total Thickness: 0.0076" +/- 5% (ASTM-D-3652)
- Elongation at Break: 300% (ASTM-D-882)
FMF-121 Aluminum Foil / Polyester Film / Aluminum Foil EMI-RFI Shielding Laminate
FMF-121 is a foil/film/foil laminate that sandwiches a 0.002" polyester film between two 0.001" aluminum foil layers, for a total thickness of 0.004" +/- 10%. It is engineered for shielding applications in the wire and cable industry and is supplied in silver color with a one-year shelf life under standard storage conditions.
Key Properties
- Total Thickness: 0.004 inch +/- 10% (ASTM-D-374)
- Aluminum Foil Thickness (each layer): 0.001"
- Polyester Film Thickness: 0.002"
- Construction: Dual aluminum foil layers laminated around a polyester film core
- Color: Silver
- Shelf Life: 1 year @ 70°F(21°C)/50% R.H.
BISCO® EC-2130
2130 is an extremely soft, 30 Shore A (80 Shore OO) nickel-graphite filled electrically conductive solid silicone, available in standard thicknesses of 0.063" ±0.15 and 0.125" ±0.20. It delivers shielding effectiveness of approximately 105 to 110 dB across 100 MHz to 10 GHz per Mil G83528, a volume resistivity of <1.0 ohm-cm, a thermal conductivity of 3.33 W/m·K (ASTM E1530), and a compression set of 10% max (158°F, 70 hours, 25% compressed, ASTM D395 Method B). The material meets UL 94 V-0 and HF-1.
Key Properties
- Hardness Shore A: 30 ±5 (ASTM D2240)
- Hardness Shore OO: 80 ±10 (ASTM D2240)
- Tensile Strength: 60 psi (ASTM D412)
- Compression Set, 158°F for 70 Hours 25% Compressed: 10% max (ASTM D395 Method B)
- Volume Resistivity: <1.0 Ohm-cm
- Temperature Range: -79.6°F to 392°F
BISCO® EC2265
BISCO® EC2265 is a carbon black filled solid silicone material with a Shore A hardness of 65 ±5, available in six standard thicknesses from 0.031" to 0.250" with a glossy smooth surface finish. It acts as a low amperage conductor and provides protection against electrostatic discharge (ESD), with an electrical conductivity of 5 ohm•cm per ASTM D991 and a temperature range of -80°F to 437°F. Tensile strength is 754 psi and compression set is 26% at 70 hours @ 302°F @ 25% per ASTM D395.
Key Properties
- Durometer, Shore A: 65 ±5 (ASTM D2240)
- Tensile Strength: 754 psi (ASTM D412)
- Elongation: 260% (ASTM D412)
- Compression Set, 70 Hours @ 302°F @ 25%: 26% (ASTM D395)
- Specific Gravity: 1.17 g/cc (ASTM D297)
- Temperature Range: -80°F to 437°F
C-13 PS Copper Foil / Polyester Film EMI-RFI Shielding Tape
C-13 PS is a copper foil and polyester film laminate pressure-sensitive tape built from a 0.0007" copper foil, 0.0005" polyester film, and 0.001" acrylic adhesive for a slim total construction of 0.0023". It delivers signal attenuation of 105 dB @ 100 MHz, peel strength of 40 oz./inch of width, and dielectric strength of 3,900 volts. A high 30,000 P.S.I. tensile strength supports precision die-cutting into compact shielding components.
Key Properties
- Peel Strength: 40 oz./inch of width (ASTM-D-1000)
- Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 30,000 P.S.I (ASTM-D-882)
- Dielectric Strength: 3,900 volts (ASTM D149)
- Total Thickness: 0.0023" (ASTM-D-3652)
- Elongation at Break: 5% (ASTM-D-882)
C-13 NPS Copper Foil / Polyester Film EMI-RFI Shielding Laminate
Short Description
C-13 NPS is a copper foil and polyester film laminate constructed without adhesive or liner, at a total thickness of 0.0013". It provides signal attenuation of 105dB @ 100 MHz and a dielectric strength of 3,900 volts, with tensile strength of 30,000 P.S.I. and elongation at break of 5%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.Key Properties
- Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 30,000 P.S.I. (ASTM-D-882)
- Elongation at Break: 5% (ASTM-D-882)
- Dielectric Strength: 3,900 volts (ASTM D149)
- Total Thickness: 0.0013" (ASTM-D-374)
- Copper Foil Thickness: 0.0007"
C-18 Copper Foil / Polyester Film EMI-RFI Shielding Laminate
C-18 is a copper foil and polyester film laminate constructed without adhesive or liner, at a total thickness of 0.0018". It provides signal attenuation of 105dB @ 100 MHz and a dielectric strength of 5,000 volts, with tensile strength of 17,000 P.S.I. and elongation at break greater than 5%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 17,000 P.S.I. (ASTM-D-882)
- Elongation at Break: >5% (ASTM-D-882)
- Dielectric Strength: 5,000 volts (ASTM D149)
- Total Thickness: 0.0018" (PSTC-33)
- Copper Foil Thickness: 0.0007"
C-20 PS Copper Foil / Polyester Film EMI-RFI Shielding Tape (Solderable)
C-20 PS is a heavy-duty copper foil and polyester film laminate pressure-sensitive tape whose copper shield is solderable when done with care, combining a 0.0014" copper foil, 0.00048" polyester film, and 0.001" acrylic adhesive for a total thickness (without liner) of 0.0031" +/- 10%. It delivers signal attenuation of 115 dB @ 100 MHz, peel strength of 32 oz/inch of width, and dielectric strength of 3,900 volts. The solderable copper surface allows direct electrical connections to be made to the shield where a fabricated ground or bond point is required.
Key Properties
- Peel Strength: 32 oz/inch of width (ASTM-D-1000)
- Signal Attenuation: 115dB @ 100 MHz (ASTM D4935-99)
- Dielectric Strength: 3,900 volts (ASTM D149)
- Total Thickness: 0.0031" +/- 10% (PSTC-33)
- Release Liner: 90#
- Color: Copper
C-25 PS Copper Foil / Polyester Film EMI-RFI Shielding Tape (Solderable)
C-25 PS is a heavy-duty copper foil and polyester film laminate pressure-sensitive tape whose copper shield is solderable when done with care, combining a 0.0014" copper foil, 0.00092" polyester film, and 0.001" acrylic adhesive for a total thickness of 0.0043". It delivers signal attenuation of 115 dB @ 100 MHz, peel strength of 32 oz/inch of width, and dielectric strength of 5,000 volts. Tensile strength of 23,000 PSI with 29% elongation at break gives the tape both structural durability and conformability during application.
Key Properties
- Peel Strength: 32 oz/inch of width (ASTM-D-1000)
- Signal Attenuation: 115dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 23,000 PSI (ASTM-D-882)
- Dielectric Strength: 5,000 volts (ASTM D149)
- Total Thickness: 0.0043" (PSTC-33)
- Elongation at Break: 29% (ASTM-D-882)
C-25 NPS Heavy Duty Copper Foil / Polyester Film EMI-RFI Shielding Laminate
C-25 NPS is a heavy duty copper foil and polyester film laminate at a total thickness of 0.0025", with a copper shield that is solderable if done with care. It provides signal attenuation of 115dB @ 100 MHz and a dielectric strength of 5,000 volts, with breaking strength of 70 lbs./inch of width and tensile strength of 23,000 P.S.I. at 29% elongation at break.
Key Properties
- Signal Attenuation: 115dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 23,000 P.S.I. (ASTM-D-882)
- % Elongation at Break: 29% (ASTM-D-882)
- Dielectric Strength: 5,000 volts (ASTM D149)
- Total Thickness: 0.0025" (PSTC-33)
- Breaking Strength: 70 lbs./Inch of Width (ASTM-D-1000)
C-28 PS Copper Foil / Polyester Film EMI/RFI Shielding Tape
C-28 PS is a copper foil and polyester film laminate tape engineered for EMI and RFI shielding of electronic components, delivering signal attenuation of 105 dB at 100 MHz. Its 0.0038" laminate construction combines a 0.0007" copper foil, a 0.002" polyester film, and a 0.001" acrylic pressure-sensitive adhesive, providing a peel strength of 32 oz./inch of width and a dielectric strength of 8,800 volts.
Key Properties
- Peel Strength: 32 oz./inch of width (ASTM-D-1000)
- Signal Attenuation: 105 dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 17,000 P.S.I. (ASTM-D-882)
- Dielectric Strength: 8,800 volts (ASTM D149)
- Carrier Construction: 0.0007" copper foil laminated to 0.002" polyester film
- Total Tape Thickness: 0.0038" (ASTM-D-3652)
C-28 NPS Copper Foil / Polyester Film EMI-RFI Shielding Laminate
C-28 NPS is a copper foil and polyester film laminate constructed without adhesive or liner, at a total thickness of 0.0028". It provides signal attenuation of 105dB @ 100 MHz and a dielectric strength of 8,800 volts, with tensile strength of 21,500 P.S.I. and elongation at break of 100%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 21,500 P.S.I. (ASTM-D-882)
- Elongation at Break: 100% (ASTM-D-882)
- Dielectric Strength: 8,800 volts (ASTM D149)
- Total Thickness: 0.0028" (ASTM-D-374)
- Copper Foil Thickness: 0.0007"
C-35 PS Copper Foil / Polyester Film EMI-RFI Shielding Tape
C-35 PS is a copper foil and polyester film laminate pressure-sensitive tape built from a 0.0014" copper foil, 0.002" polyester film, and 0.001" acrylic adhesive for a total construction of 0.0044" +/- 10%. It delivers signal attenuation of 115 dB @ 100 MHz, peel strength of 32 oz/inch of width, and a high dielectric strength of 8,800 volts. Breaking strength of 78#/in of width with 10% elongation at break gives the laminate solid structural integrity for converting and installation.
Key Properties
- Peel Strength: 32 oz/inch of width (ASTM D-1000)
- Signal Attenuation: 115dB @ 100 MHz (ASTM D4935-99)
- Breaking Strength: 78#/in of width (ASTM D-882)
- Dielectric Strength: 8,800 volts (ASTM D149)
- Total Thickness: 0.0044" +/- 10% (ASTM-D-3652)
- Elongation at Break: 10% (ASTM-D-882)
C-38 PS Copper Foil / Polyester Film EMI-RFI Shielding Tape
C-38 PS is a copper foil and polyester film laminate pressure-sensitive tape built from a 0.0007" copper foil, 0.003" polyester film, and 0.001" acrylic adhesive for a total construction of 0.0048". It delivers signal attenuation of 105 dB @ 100 MHz, peel strength of 32 oz./inch of width, and a high dielectric strength of 10,200 volts. A high 95% elongation at break gives the laminate strong conformability across irregular surfaces during application.
Key Properties
- Peel Strength: 32 oz./inch of width (ASTM-D-1000)
- Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 12,500 P.S.I. (ASTM-D-882)
- Dielectric Strength: 10,200 volts (ASTM D149)
- Total Thickness: 0.0048" (ASTM-D-3652)
- Elongation at Break: 95% (ASTM-D-882)
C-38 NPS Copper Foil / Polyester Film EMI-RFI Shielding Laminate
C-38 NPS is a copper foil and polyester film laminate constructed without adhesive or liner, at a total thickness of 0.0038". It provides signal attenuation of 105dB @ 100 MHz and a dielectric strength of 10,200 volts, with tensile strength of 16,000 P.S.I. and elongation at break of 95%. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 16,000 P.S.I. (ASTM-D-882)
- Elongation at Break: 95% (ASTM-D-882)
- Dielectric Strength: 10,200 volts (ASTM D149)
- Total Thickness: 0.0038" (ASTM-D-374)
- Copper Foil Thickness: 0.0007"
C-45 PS Copper Foil / Polyester Film EMI-RFI Shielding Tape
C-45 PS is a copper foil and polyester film laminate pressure-sensitive tape built from a 0.0014" copper foil, 0.003" polyester film, and 0.0015" acrylic adhesive for a total construction of 0.006". It delivers signal attenuation of 115 dB @ 100 MHz, peel strength of 40 oz./inch of width, and a high dielectric strength of 10,200 volts. Tensile strength of 16,000 P.S.I. with 95% elongation at break gives the laminate both durability and strong conformability.
Key Properties
- Peel Strength: 40 oz./inch of width (ASTM-D-1000)
- Signal Attenuation: 115dB @ 100 MHz (ASTM D4935-99)
- Tensile Strength: 16,000 P.S.I. (ASTM-D-882)
- Dielectric Strength: 10,200 volts (ASTM D149)
- Total Thickness: 0.006" (ASTM-D-3652)
- Elongation at Break: 95% (ASTM-D-882)
C-58 PS Copper Foil / Polyester Film EMI-RFI Shielding Tape
C-58 PS is a copper foil and polyester film laminate pressure-sensitive tape built from a 0.0007" copper foil, 0.005" polyester film, and 0.001" acrylic adhesive for a total thickness (without liner) of 0.0069" +/- 10%. It delivers signal attenuation of 105 dB @ 100 MHz, peel strength of 32 oz./inch of width, and a high dielectric strength of 13,500 volts. The heavier polyester film layer adds mechanical robustness relative to thinner grades in the line.
Key Properties
- Peel Strength: 32 oz./inch of width (ASTM-D-1000)
- Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99)
- Dielectric Strength: 13,500 volts (ASTM D149)
- Total Thickness: 0.0069" +/- 10% (ASTM-D-3652)
- Release Liner: 90 lb.
- Color: Copper
C-58 NPS Copper Foil / Polyester Film EMI-RFI Shielding Laminate
C-58 NPS is a copper foil and polyester film laminate constructed without adhesive or liner, at a total thickness of 0.0059" +/- 10%. It provides signal attenuation of 105dB @ 100 MHz and a dielectric strength of 13,500 volts. Its unsupported construction makes it well suited for applications where a self-contained shielding layer is required rather than a pressure-sensitive tape.
Key Properties
- Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99)
- Dielectric Strength: 13,500 volts (ASTM D149)
- Total Thickness: 0.0059" +/- 10% (ASTM-D-374)
- Copper Foil Thickness: 0.0007"
- Polyester Film Thickness: 0.005"
- Color: Copper
C-65 PS Copper Foil / Polyester Film EMI-RFI Shielding Tape (Solderable)
C-65 PS is a heavy-duty copper foil and polyester film laminate pressure-sensitive tape whose copper shield is solderable when done with care, combining a 0.0014" copper foil, 0.005" polyester film, and 0.001" acrylic adhesive for a total thickness (without liner) of 0.0076" +/- 10%. It delivers signal attenuation of 115 dB @ 100 MHz, peel strength of 32 oz/inch of width, and a high dielectric strength of 13,500 volts. As the heaviest-gauge grade in the solderable family, it offers the greatest mechanical robustness for demanding shielding applications.
Key Properties
- Peel Strength: 32 oz/inch of width (ASTM-D-1000)
- Signal Attenuation: 115dB @ 100 MHz (ASTM D4935-99)
- Dielectric Strength: 13,500 volts (ASTM D149)
- Total Thickness: 0.0076" +/- 10% (PSTC-33)
- Release Liner: 90#
- Color: Copper
MC-180 Electrodeposited Copper Foil / Polyester Film Shielding Laminate
MC-180 is an unsupported electrodeposited (E.D.) copper foil and polyester film laminate, constructed without adhesive, at a total thickness of 0.0018 inch +/- 10%. It is engineered for electrical and electromagnetic shielding and delivers a breaking strength of 45 lbs./inch of width and tensile strength of 25,000 P.S.I., with elongation at break greater than 5%. It is compatible with copper braids and copper conductors.
Key Properties
- Tensile Strength: 25,000 P.S.I. (ASTM-D-882)
- Breaking Strength: 45 lbs./inch of width (ASTM-D-882)
- Elongation at Break: >5% (ASTM-D-882)
- Total Thickness: 0.0018 inch +/- 10% (ASTM-D-374)
- Weight Per Square Yard: 5.5 oz./sq. yd. +/- 10%
- Color: Natural (Copper)
ProCell™ EV Firewall Barrier
ProCell™ EV Firewall Barrier is a specially formulated cellular silicone elastomer designed to delay thermal runaway and temperature spikes within electric vehicle battery packs, available in thicknesses from 0.059" to 0.118" with a density range of 24.97–44.76 lb/ft³ per ASTM D1056. It achieves a compression set of 3.0% at 22 hours @ 212°F @ 50% per ASTM D1056, a dielectric strength of 6.1 kV/mm, and a thermal conductivity of 0.15 W/m·K at both 122°F and 392°F per ASTM D5470. The material meets UL 94 V-0/5VA (certified for 0.118" or thicker, tested at a 3rd party lab).
Key Properties
- Compression Force Deflection Range @ 25%: 7.25 – 18.13 psi (ASTM D1056)
- Tensile: 80.5 psi (ASTM D412)
- Elongation: 132% (ASTM D412)
- Compression Set, 22 Hours @ 212°F @ 50%: 3.0% (ASTM D1056)
- Density Range: 24.97 – 44.76 lb/ft³ (ASTM D1056)
- Thermal Conductivity @ 122°F / 392°F: 0.15 W/m·K / 0.15 W/m·K (ASTM D5470)
eGRAF® HITHERM™ HT-1205
eGRAF HITHERM HT-1205 is a flexible pure graphite thermal interface material with a typical thickness of 0.127 mm (0.005") and through-plane / in-plane thermal conductivity of 10 / 150 W/m·K at 700 kPa. The material delivers thermal impedance of 0.59 K-cm²/W at 200 kPa and 0.30 K-cm²/W at 700 kPa across an operating temperature range of -40°C to +400°C. UL 94 V-0 flammability rated, RoHS compliant, halogen free, and lead free.
Key Properties
- Thermal Conductivity @ 700 kPa (Through-Plane • In-Plane): 10 • 150 W/m·K
- Thermal Impedance @ 200 kPa: 0.59 K-cm²/W
- Thermal Impedance @ 700 kPa: 0.30 K-cm²/W
- Hardness: 85 Shore A
- Operating Temperature: -40°C to +400°C
- Typical Thickness: 0.127 mm (0.005") ± 10%
eGRAF® HITHERM™ HT-1210
eGRAF HITHERM HT-1210 is a flexible pure graphite thermal interface material with a typical thickness of 0.25 mm (0.010") and through-plane / in-plane thermal conductivity of 10 / 150 W/m·K at 700 kPa. The material delivers thermal impedance of 0.66 K-cm²/W at 200 kPa and 0.40 K-cm²/W at 700 kPa across an operating temperature range of -40°C to +400°C. UL 94 V-0 flammability rated, RoHS compliant, halogen free, and lead free.
Key Properties
- Thermal Conductivity @ 700 kPa (Through-Plane • In-Plane): 10 • 150 W/m·K
- Thermal Impedance @ 200 kPa: 0.66 K-cm²/W
- Thermal Impedance @ 700 kPa: 0.40 K-cm²/W
- Hardness: 85 Shore A
- Operating Temperature: -40°C to +400°C
- Typical Thickness: 0.25 mm (0.010") ± 5%
eGRAF® HITHERM™ HT-1220
eGRAF HITHERM HT-1220 is a flexible pure graphite thermal interface material with a typical thickness of 0.51 mm (0.020") and through-plane / in-plane thermal conductivity of 10 / 150 W/m·K at 700 kPa. The material is the thickest grade in the HITHERM HT-1200 pure graphite series, operating across a temperature range of -40°C to +400°C. UL 94 V-0 flammability rated, RoHS compliant, halogen free, and lead free.
Key Properties
- Thermal Conductivity @ 700 kPa (Through-Plane • In-Plane): 10 • 150 W/m·K
- Hardness: 85 Shore A
- Operating Temperature: -40°C to +400°C
- Typical Thickness: 0.51 mm (0.020") ± 5%
- Electrical Resistivity (In-Plane • Through-Thickness): 60 • 1230 µΩm
- Flammability: UL 94 V-0
eGRAF® HITHERM™ HT-2505
eGRAF HITHERM HT-2505 is a flexible polymer-enhanced graphite thermal interface material with a typical thickness of 0.127 mm (0.005") and through-plane / in-plane thermal conductivity of 16 / 120 W/m·K at 700 kPa. The material delivers thermal impedance of 0.41 K-cm²/W at 200 kPa and 0.24 K-cm²/W at 700 kPa across an operating temperature range of -25°C to +125°C. UL 94 V-0 flammability rated, RoHS compliant, and lead free.
Key Properties
- Thermal Conductivity @ 700 kPa (Through-Plane • In-Plane): 16 • 120 W/m·K
- Thermal Impedance @ 200 kPa: 0.41 K-cm²/W
- Thermal Impedance @ 700 kPa: 0.24 K-cm²/W
- Hardness: 85 Shore A
- Operating Temperature: -25°C to +125°C
- Typical Thickness: 0.127 mm (0.005") ± 10%
eGRAF® HITHERM™ HT-2510
eGRAF HITHERM HT-2510 is a flexible polymer-enhanced graphite thermal interface material with a typical thickness of 0.25 mm (0.010") and through-plane / in-plane thermal conductivity of 16 / 120 W/m·K at 700 kPa. The material delivers thermal impedance of 0.58 K-cm²/W at 200 kPa and 0.41 K-cm²/W at 700 kPa across an operating temperature range of -25°C to +125°C. UL 94 V-0 flammability rated, RoHS compliant, and lead free.
Key Properties
- Thermal Conductivity @ 700 kPa (Through-Plane • In-Plane): 16 • 120 W/m·K
- Thermal Impedance @ 200 kPa: 0.58 K-cm²/W
- Thermal Impedance @ 700 kPa: 0.41 K-cm²/W
- Hardness: 85 Shore A
- Operating Temperature: -25°C to +125°C
- Typical Thickness: 0.25 mm (0.010") ± 5%
eGRAF® HITHERM™ HT-C3200
eGRAF HITHERM HT-C3200 is a die-cut flexible graphite thermal interface material with in-plane thermal conductivity of 800 W/m·K and through-plane conductivity of 7 W/m·K at 700 kPa. The material delivers thermal impedance of 0.49 K·cm²/W at 200 kPa and 0.18 K·cm²/W at 700 kPa across an operating temperature range of -40°C to +400°C, and its compressibility compensates up to 125 µm of flatness variation between mating surfaces. UL 94 V-0 flammability rated, RoHS compliant, and halogen free.
Key Properties
- Thermal Conductivity @ 700 kPa — In-Plane: 800 W/m·K
- Thermal Conductivity @ 700 kPa — Through-Plane: 7 W/m·K
- Thermal Impedance @ 200 kPa: 0.49 K·cm²/W
- Thermal Impedance @ 700 kPa: 0.18 K·cm²/W
- Operating Temperature: -40°C to +400°C
- Typical Starting Thickness: 200 ± 20 µm / 0.008 ± 0.001"
SPREADERSHIELD-FLX™ SSFLX300-0.51-P1GP1A1
SPREADERSHIELD-FLX™ SSFLX300-0.51-P1GP1A1 is an eGRAF® flexible graphite heat spreader and heat shield with a 300 W/m·K in-plane and 3.4 W/m·K through-plane thermal conductivity, consisting of a 0.51 mm graphite layer with PET film coating (0.025 mm) on top and PET film adhesive (0.080 mm) on the bottom for a total spreader thickness of 0.71 mm. It delivers a thermal contact impedance of 8.1 °C·cm²/W per side, a dielectric strength of 2500 V, a minimum bend radius of 6.4 mm, and an operating temperature of -40°C to +150°C. The material is UL 94V-0 rated and RoHS compliant.
Key Properties
- Thermal Conductivity — In-Plane: 300 W/m·K
- Thermal Conductivity — Through-Plane: 3.4 W/m·K
- Thermal Contact Impedance Per Side: 8.1 °C·cm²/W
- Operating Temperature: -40°C to +150°C
- Graphite Thickness / Spreader Thickness: 0.51 mm / 0.71 mm
- UL Flammability Rating: 94V-0
SPREADERSHIELD-FLX™ SSFLX300-0.94-P1GP1A1
SPREADERSHIELD-FLX™ SSFLX300-0.94-P1GP1A1 is an eGRAF® flexible graphite heat spreader and heat shield with a 300 W/m·K in-plane and 4.2 W/m·K through-plane thermal conductivity, consisting of a 0.94 mm graphite layer with PET film coating (0.025 mm) on top and PET film adhesive (0.080 mm) on the bottom for a total spreader thickness of 1.25 mm. It delivers a thermal contact impedance of 7.0 °C·cm²/W per side, a dielectric strength of 3500 V, a minimum bend radius of 6.4 mm, and an operating temperature of -40°C to +150°C. The material is UL 94V-0 rated and RoHS compliant.
Key Properties
- Thermal Conductivity — In-Plane: 300 W/m·K
- Thermal Conductivity — Through-Plane: 4.2 W/m·K
- Thermal Contact Impedance Per Side: 7.0 °C·cm²/W
- Operating Temperature: -40°C to +150°C
- Graphite Thickness / Spreader Thickness: 0.94 mm / 1.25 mm
SpreaderShield™ SS350
SpreaderShield™ SS350 is a natural graphite flexible heat spreader and heat shield with an in-plane thermal conductivity of 350 W/m·K and a through-plane thermal conductivity of 4.1 W/m·K, available in thicknesses from 0.127 to 0.94 mm. It delivers a thermal contact impedance of 0.34 °C·cm²/W per side at 0.51 mm, an in-plane electrical conductivity of 1,750 S/cm, and an operating temperature range of -40°C to +400°C. The material is UL 94V-0 rated and RoHS compliant.
Key Properties
- Thermal Conductivity — In-Plane: 350 W/m·K
- Thermal Conductivity — Through-Plane: 4.1 W/m·K
- Thermal Contact Impedance Per Side: 0.34 °C·cm²/W @ 0.51 mm thickness
- Operating Temperature Range: -40°C to +400°C
- Thickness Capability Range: 0.127 – 0.94 mm
- UL Flammability Rating: 94V-0
SpreaderShield™ SS400
SpreaderShield™ SS400 is a natural graphite flexible heat spreader and heat shield with an in-plane thermal conductivity of 400 W/m·K and a through-plane thermal conductivity of 3.7 W/m·K, available in thicknesses from 0.050 to 0.94 mm — the broadest thickness range in the natural graphite series. It delivers a thermal contact impedance of 0.38 °C·cm²/W per side at 0.51 mm, a tensile strength of 9.7 MPa, an in-plane electrical conductivity of 1,900 S/cm, and an operating temperature range of -40°C to +400°C. The material is UL 94V-0 rated and RoHS compliant.
Key Properties
- Thermal Conductivity — In-Plane: 400 W/m·K
- Thermal Conductivity — Through-Plane: 3.7 W/m·K
- Thermal Contact Impedance Per Side: 0.38 °C·cm²/W @ 0.51 mm thickness
- Operating Temperature Range: -40°C to +400°C
- Thickness Capability Range: 0.050 – 0.94 mm
- UL Flammability Rating: 94V-0
SpreaderShield™ SS500
SpreaderShield™ SS500 is a natural graphite flexible heat spreader and heat shield with an in-plane thermal conductivity of 500 W/m·K and a through-plane thermal conductivity of 2.8 W/m·K, available in thicknesses from 0.076 to 0.40 mm. It delivers a thermal contact impedance of 0.90 °C·cm²/W per side at 0.102 mm, a tensile strength of 7.7 MPa, an in-plane electrical conductivity of 2,400 S/cm, and an operating temperature range of -40°C to +400°C. The material is UL 94V-0 rated and RoHS compliant.
Key Properties
- Thermal Conductivity — In-Plane: 500 W/m·K
- Thermal Conductivity — Through-Plane: 2.8 W/m·K
- Thermal Contact Impedance Per Side: 0.90 °C·cm²/W @ 0.102 mm thickness
- Operating Temperature Range: -40°C to +400°C
- Thickness Capability Range: 0.076 – 0.40 mm
SpreaderShield™ SS600
SpreaderShield™ SS600 is a natural graphite flexible heat spreader and heat shield with the highest in-plane thermal conductivity in the natural graphite series at 600 W/m·K, available in a single standard thickness of 0.127 mm. It delivers a through-plane thermal conductivity of 3.5 W/m·K, a thermal contact impedance of 0.44 °C·cm²/W per side at 0.102 mm, a tensile strength of 9.7 MPa, an in-plane electrical conductivity of 2,900 S/cm, and an operating temperature range of -40°C to +400°C. The material is UL 94V-0 rated and RoHS compliant.
Key Properties
- Thermal Conductivity — In-Plane: 600 W/m·K
- Thermal Conductivity — Through-Plane: 3.5 W/m·K
- Thermal Contact Impedance Per Side: 0.44 °C·cm²/W @ 0.102 mm thickness
- Operating Temperature Range: -40°C to +400°C
- Thickness: 0.127 mm
- UL Flammability Rating: 94V-0
Protect® 1500FG
Arlon Protect 1500FG is a fiberglass-supported cured silicone rubber insulator sheet engineered for LED and power applications, delivering 1.5 W/m·K thermal conductivity and > 19 kV/mm dielectric strength. The construction is offered at 7 – 20 mils (0.18 – 0.51 mm) thickness with thermal impedance of 1.9 × 10⁻⁴ m²·K/W at 40 PSI across an operating range of -100°C to +204°C. UL listed (QMFZ2.E54153) with a UL 94 V-0 flame rating, RTI 150°C/150°C, RoHS compliant, and free of halogenated flame retardants.
Key Properties
- Thermal Conductivity: 1.5 W/m·K (ASTM D5470)
- Thermal Impedance @ 40 PSI: 1.9 × 10⁻⁴ m²·K/W / 0.3 in²·°C/W (ASTM D5470)
- Dielectric Strength: > 19 kV/mm / > 500 V/mil (ASTM D149)
- Hardness: 77 Shore A (ASTM D2240)
- Operating Range: -100°C to +204°C
- Thickness Range: 0.18 – 0.51 mm (7 – 20 mils)
Protect® 48A53R009
Protect 48A53R009 is a thermally conductive, ready-to-use thermal interface insulator pad featuring fully cured silicone on both sides of a Style 1080 Fiberglass substrate, with a thermal conductivity of 1.5 W/°C·m at 100°C and a dielectric strength of 42.7 kV/mm. The 0.229 mm overall construction delivers thermal impedance of 0.40 °C·in²/W at 380 psi across an operating range of -46°C to +204°C. UL listed (E54153) with a UL 94 V-0 flame rating, fire-resistant features, and a 60-month shelf life at room temperature.
Key Properties
- Thermal Conductivity: 1.5 W/°C·m @ 100°C (ASTM E1530)
- Thermal Impedance @ 380 psi: 0.40 °C·in²/W (ASTM E1530)
- Dielectric Strength: 42.7 kV/mm (ASTM D149)
- Durometer: 85 Shore A (ASTM D2240)
- Operating Temperature: -46°C to +204°C
- Overall Product Thickness: 0.229 mm
Secure® 1500 KT2
Secure 1500 KT2 is a double-sided thermal interface adhesive featuring thermally conductive uncured silicone on both sides of a Kapton MT substrate, with a thermal conductivity of 1.5 W/°C·m at 100°C and a dielectric strength of 53.1 kV/mm. The 0.191 mm overall construction delivers the lowest thermal impedance in the Secure family at 0.29 °C·in²/W at 380 psi across an operating range of -101°C to +204°C. UL listed (E54153) with a UL 94 V-0 flame rating and RTI 150°C/150°C for both mechanical and electrical applications.
Key Properties
- Thermal Conductivity: 1.5 W/°C·m @ 100°C (ASTM E1530)
- Thermal Impedance @ 380 psi: 0.29 °C·in²/W (ASTM E1530)
- Dielectric Strength: 53.1 kV/mm (ASTM D149)
- Durometer: 77 Shore A (ASTM D2240)
- Operating Temperature: -101°C to +204°C
- Overall Product Thickness: 0.191 mm
Secure® 48A51R009
Secure 48A51R009 is a double-sided thermal interface adhesive featuring thermally conductive uncured silicone on both sides of a Style 1080 Fiberglass substrate, with a thermal conductivity of 1.5 W/°C·m at 100°C and a dielectric strength of 42.7 kV/mm. The 0.229 mm overall construction is the thinner of the Style 1080 Fiberglass Secure options, delivering thermal impedance of 0.40 °C·in²/W at 380 psi across an operating range of -101°C to +204°C. UL listed (E54153) with a UL 94 V-0 flame rating and RTI 150°C/150°C for both mechanical and electrical applications.
Key Properties
- Thermal Conductivity: 1.5 W/°C·m @ 100°C (ASTM E1530)
- Thermal Impedance @ 380 psi: 0.40 °C·in²/W (ASTM E1530)
- Dielectric Strength: 42.7 kV/mm (ASTM D149)
- Durometer: 85 Shore A (ASTM D2240)
- Operating Temperature: -101°C to +204°C
- Overall Product Thickness: 0.229 mm
Secure® 48A51R016
Secure 48A51R016 is a double-sided thermal interface adhesive featuring thermally conductive uncured silicone on both sides of a Style 1080 Fiberglass substrate, with a thermal conductivity of 1.5 W/°C·m at 100°C and a dielectric strength of 38.9 kV/mm. The 0.406 mm overall construction delivers thermal impedance of 0.60 °C·in²/W at 380 psi across an operating range of -101°C to +204°C. UL listed (E54153) with a UL 94 V-0 flame rating and RTI 150°C/150°C for both mechanical and electrical applications.
Key Properties
- Thermal Conductivity: 1.5 W/°C·m @ 100°C (ASTM E1530)
- Thermal Impedance @ 380 psi: 0.60 °C·in²/W (ASTM E1530)
- Dielectric Strength: 38.9 kV/mm (ASTM D149)
- Durometer: 77 Shore A (ASTM D2240)
- Operating Temperature: -101°C to +204°C
- Overall Product Thickness: 0.406 mm
Secure® 99A50R007
Secure 99A50R007 is a fire-resistant single-sided thermal interface adhesive pad featuring 0.1524 mm of uncured silicone between a 0.025 mm FEP top interleave and a 0.076 mm PTFE-coated fiberglass bottom carrier, with a thermal conductivity of 1.5 W/°C·m at 100°C and a dielectric strength of 25.5 kV/mm. The 0.178 mm overall construction delivers thermal impedance of 0.29 °C·in²/W at 380 psi across an operating range of -101°C to +204°C. UL listed (E54153) with a UL 94 V-0 flame rating and RTI 150°C/150°C for both mechanical and electrical applications.
Key Properties
- Thermal Conductivity: 1.5 W/°C·m @ 100°C (ASTM E1530)
- Thermal Impedance @ 380 psi: 0.29 °C·in²/W (ASTM E1530)
- Dielectric Strength: 25.5 kV/mm (ASTM D149)
- Durometer: 85 Shore A (ASTM D2240)
- Operating Temperature: -101°C to +204°C
- Overall Product Thickness: 0.178 mm
Secure® 99A50R008
Secure 99A50R008 is a fire-resistant single-sided thermal interface adhesive pad featuring 0.203 mm of uncured silicone between a 0.025 mm FEP top interleave and a 0.076 mm PTFE-coated fiberglass bottom carrier, with a thermal conductivity of 1.5 W/°C·m at 100°C and a dielectric strength of 30.8 kV/mm. The construction delivers thermal impedance of 0.28 °C·in²/W at 380 psi across an operating range of -101°C to +204°C. UL listed (E54153) with a UL 94 V-0 flame rating and RTI 150°C/150°C for both mechanical and electrical applications.
Key Properties
- Thermal Conductivity: 1.5 W/°C·m @ 100°C (ASTM E1530)
- Thermal Impedance @ 380 psi: 0.28 °C·in²/W (ASTM E1530)
- Dielectric Strength: 30.8 kV/mm (ASTM D149)
- Durometer: 85 Shore A (ASTM D2240)
- Operating Temperature: -101°C to +204°C
- Overall Product Thickness: 0.203 mm
Secure® 99A50R009
Secure 99A50R009 is a fire-resistant single-sided thermal interface adhesive pad featuring 0.203 mm of uncured silicone between a 0.025 mm FEP top interleave and a 0.076 mm PTFE-coated fiberglass bottom carrier, with a thermal conductivity of 1.5 W/°C·m at 100°C and a dielectric strength of 32.7 kV/mm. The 0.229 mm overall construction delivers thermal impedance of 0.29 °C·in²/W at 380 psi across an operating range of -101°C to +204°C. UL listed (E54153) with a UL 94 V-0 flame rating and RTI 150°C/150°C for both mechanical and electrical applications.
Key Properties
- Thermal Conductivity: 1.5 W/°C·m @ 100°C (ASTM E1530)
- Thermal Impedance @ 380 psi: 0.29 °C·in²/W (ASTM E1530)
- Dielectric Strength: 32.7 kV/mm (ASTM D149)
- Durometer: 85 Shore A (ASTM D2240)
- Operating Temperature: -101°C to +204°C
- Overall Product Thickness: 0.229 mm
BERGQUIST GAP PAD TGP 1000VOUS Ultra-Soft Viscoelastic Thermally Conductive Gap Filler (formerly GAP PAD VO ULTRA SOFT)
BERGQUIST GAP PAD TGP 1000VOUS is an ultra-conformable, gel-like thermally conductive gap filler with 1.0 W/(m·K) thermal conductivity and a Shore 00 hardness of 5 — the softest grade in the Gap Pad TGP family. The viscoelastic material delivers thermal impedance of 1.68 °C·in²/W at 0.040"/30% deflection with 6,000 VAC dielectric breakdown voltage and excellent vibration dampening and shock absorbing characteristics. Offered at 0.508 to 6.35 mm thickness across an operating range of -60°C to +200°C, with UL 94 V-0 flammability.
Key Properties
- Thermal Conductivity: 1.0 W/(m·K) (ASTM D5470)
- Thermal Impedance @ 0.040 in, 30% Deflection: 1.68 °C·in²/W
- Hardness: 5 Shore 00 (ASTM D2240)
- Young's Modulus: 55 kPa (8 psi) (ASTM D575)
- Dielectric Breakdown Voltage: 6,000 VAC (ASTM D149)
- Operating Temperature Range: -60°C to +200°C
BERGQUIST GAP PAD TGP 1500 Un-Reinforced Thermally Conductive Gap Filler (formerly GAP PAD 1500)
BERGQUIST GAP PAD TGP 1500 is an un-reinforced, conformable thermally conductive gap filler with 1.5 W/(m·K) thermal conductivity and natural tack on both sides. The un-reinforced construction provides additional compliancy compared to fiberglass-reinforced grades, with thermal impedance of 1.33 °C·in²/W at 0.040"/30% deflection and dielectric breakdown voltage greater than 6,000 VAC. Offered at 0.508 to 5.08 mm thickness across an operating range of -60°C to +200°C, with UL 94 V-0 flammability.
Key Properties
- Thermal Conductivity: 1.5 W/(m·K) (ASTM D5470)
- Thermal Impedance @ 0.040 in, 30% Deflection: 1.33 °C·in²/W
- Hardness: 40 Shore 00 (ASTM D2240)
- Young's Modulus: 310 kPa (45 psi) (ASTM D575)
- Dielectric Breakdown Voltage: > 6,000 VAC (ASTM D149)
- Operating Temperature Range: -60°C to +200°C
BERGQUIST GAP PAD TGP 3000 Soft “S-Class” Reinforced Thermally Conductive Gap Filler (formerly GAP PAD 3000S30)
BERGQUIST GAP PAD TGP 3000 is a fiberglass-reinforced, soft "S-Class" gap filling material with 3.0 W/(m·K) thermal conductivity, engineered for high-performance, low-stress applications using fixed standoff or clip mounting. The pad delivers exceptional thermal performance at low pressures, with dielectric breakdown voltage greater than 3,000 VAC and natural inherent tack on both sides to eliminate the need for thermally-impeding adhesive layers. Offered at 0.254 to 3.175 mm thickness across an operating range of -60°C to +200°C, with UL 94 V-0 flammability.
Key Properties
- Thermal Conductivity: 3.0 W/(m·K) (ASTM D5470)
- Hardness: 30 Shore 00 (ASTM D2240)
- Young's Modulus: 180 kPa (26 psi) (ASTM D575)
- Dielectric Breakdown Voltage: > 3,000 VAC (ASTM D149)
- Operating Temperature Range: -60°C to +200°C
- Thickness: 0.254 to 3.175 mm
BERGQUIST GAP PAD TGP 5000 High-Conductivity Soft “S-Class” Thermally Conductive Gap Filler (formerly GAP PAD 5000S35)
BERGQUIST GAP PAD TGP 5000 is a fiberglass-reinforced soft "S-Class" gap filling material delivering 5.0 W/(m·K) thermal conductivity — the highest in the Gap Pad TGP family — with a thermal impedance of 0.30 °C·in²/W at 0.040" / 30% deflection. The pad provides dielectric breakdown voltage greater than 5,000 VAC across an operating range of -60°C to +200°C, with natural inherent tack to reduce interfacial thermal resistance. Offered at 0.508 to 3.175 mm thickness, with UL 94 V-0 flammability.
Key Properties
- Thermal Conductivity: 5.0 W/(m·K) (ASTM D5470)
- Thermal Impedance @ 0.040 in, 30% Deflection: 0.30 °C·in²/W
- Hardness: 35 Shore 00 (ASTM D2240)
- Young's Modulus: 310 kPa (45 psi) (ASTM D575)
- Dielectric Breakdown Voltage: > 5,000 VAC (ASTM D149)
- Operating Temperature Range: -60°C to +200°C
BERGQUIST® SIL PAD TSP 1600S High-Performance Silicone / Fiberglass Insulator for Low-Pressure Applications (formerly SIL-PAD 900S)
BERGQUIST SIL PAD TSP 1600S is a fiberglass-reinforced silicone thermally conductive insulator engineered for low-pressure component clamping, such as spring-clip-mounted discrete semiconductors (TO-220, TO-247, TO-218). The 0.229 mm pad delivers 1.6 W/(m·K) thermal conductivity and a thermal impedance of 0.61°C·in²/W at 50 psi across an operating range of -60°C to +180°C. The smooth, highly compliant surface minimizes interfacial thermal resistance and maximizes thermal performance at low mounting pressures, with UL 94 V-0 flammability.
Key Properties
- Thermal Conductivity: 1.6 W/(m·K) (ASTM D5470)
- Thermal Impedance @ 50 psi: 0.61 °C·in²/W
- Dielectric Breakdown Voltage: 5,500 Vac (ASTM D149)
- Hardness: 92 Shore A (ASTM D2240)
- Operating Temperature Range: -60°C to +180°C
- Total Thickness: 0.229 mm
BERGQUIST® SIL PAD TSP 1800ST Soft-Tack Electrically Insulating Thermally Conductive Elastomer (formerly SIL-PAD 1500ST)
BERGQUIST SIL PAD TSP 1800ST is a fiberglass-reinforced thermal interface elastomer that is naturally tacky on both sides, delivering 1.8 W/(m·K) thermal conductivity and thermal impedance of 0.23°C·in²/W at 50 psi. The 0.203 mm pad is designed for auto-dispensing and auto-placement in high-volume assemblies with dielectric breakdown voltage of 3,000 Vac across an operating range of -60°C to +180°C. The naturally tacky surface allows repositionable placement without separate adhesive layers, with UL 94 V-0 flammability.
Key Properties
- Thermal Conductivity: 1.8 W/(m·K) (ASTM D5470)
- Thermal Impedance @ 50 psi: 0.23 °C·in²/W
- Dielectric Breakdown Voltage: 3,000 Vac (ASTM D149)
- Hardness: 75 Shore 00 (ASTM D2240)
- Operating Temperature Range: -60°C to +180°C
- Total Thickness: 0.203 mm
BERGQUIST® SIL PAD TSP 3500 Higher-Performance High-Reliability Silicone / Fiberglass Insulator (formerly SIL-PAD 2000)
BERGQUIST SIL PAD TSP 3500 is a high-performance fiberglass-reinforced silicone elastomer insulator engineered for aerospace, avionics, and other high-reliability electronic packaging, delivering 3.5 W/(m·K) thermal conductivity — the highest in the Sil-Pad family — and thermal impedance of 0.33°C·in²/W at 50 psi (at 0.01" thickness). The pad provides dielectric breakdown voltage of 4,000 Vac across an extended operating range of -60°C to +200°C, available in 0.254 to 0.508 mm thickness with UL 94 V-0 flammability. Grease-free and conformable.
Key Properties
- Thermal Conductivity: 3.5 W/(m·K) (ASTM D5470)
- Thermal Impedance @ 50 psi (0.01"): 0.33 °C·in²/W
- Dielectric Breakdown Voltage: 4,000 Vac (ASTM D149)
- Hardness: 90 Shore A (ASTM D2240)
- Operating Temperature Range: -60°C to +200°C
- Total Thickness: 0.254 to 0.508 mm
BERGQUIST® SIL PAD TSP 900 Silicone / Fiberglass Thermally Conductive Insulator Pad (formerly SIL-PAD 400)
BERGQUIST SIL PAD TSP 900 is a silicone rubber / fiberglass composite thermally conductive insulator pad — the original Sil-Pad material — with a thermal conductivity of 0.9 W/(m·K) and a thermal impedance of 1.13°C·in²/W at 50 psi (0.007" thickness). The pad delivers dielectric breakdown voltage of 3,500 to 4,500 Vac across an operating temperature range of -60°C to +180°C, with documented UL 94 V-0 flammability. The reinforcing fiberglass provides excellent cut-through resistance, and the material is non-toxic and resists damage from cleaning agents.
Key Properties
- Thermal Conductivity: 0.9 W/(m·K) (ASTM D5470)
- Thermal Impedance @ 50 psi (0.007"): 1.13°C·in²/W
- Dielectric Breakdown Voltage: 3,500 to 4,500 Vac (ASTM D149)
- Hardness: 85 Shore A (ASTM D2240)
- Operating Temperature Range: -60°C to +180°C
BERGQUIST® SIL PAD TSP K1300 Kapton®-Reinforced Thermally Conductive Insulator (formerly SIL-PAD K-10)
BERGQUIST SIL PAD TSP K1300 is a Kapton-reinforced silicone thermally conductive insulator engineered as a replacement for ceramic insulators such as Beryllium Oxide, Boron Nitride, and Alumina. The 0.15 ± 0.025 mm pad delivers 1.3 W/(m·K) thermal conductivity, dielectric breakdown voltage of 6,000 Vac minimum, and volume resistivity of 1 × 10¹² ohm-meter across an operating range of -60°C to +180°C. NASA outgassing compliant (TML 0.36%, VCM 0.09%), eliminating ceramic breakage at significantly lower cost than ceramic alternatives.
Key Properties
- Thermal Conductivity: 1.3 W/(m·K) (ASTM D5470)
- Thermal Resistance: 0.2 °C·in²/W (Bergquist Flat Plate Test)
- Dielectric Breakdown Voltage: 6,000 Vac min. (ASTM D149)
- Hardness: 90 Shore A (ASTM D2240)
- Operating Temperature Range: -60°C to +180°C
- Total Thickness: 0.15 ± 0.025 mm
Multilayer Polyimide Aerogel Thermal Protection Film with Silicone PSA AZ-TPS PI 100
AZ-TPS PI 100 is a 240 micron (9.5 mil) multilayer thermal protection film built around a 165 micron (6.5 mil) AeroZero® polyimide aerogel core, faced with polyimide films and silicone pressure-sensitive adhesive (PSA) layers, delivering a thermal conductivity of 0.046 W/m·K at 25°C. The silicone PSA bonds to stainless steel, aluminum, glass, and polymer substrates, reaching full adhesion strength after a 3-day room-temperature dwell, and the construction carries a UL94 VTM-0 flame rating. The film remains flexible and RF transparent, suiting complex, contoured part geometries across Aerospace, Defense, and Electronics applications.
Key Properties
- Thermal Conductivity (25°C): 0.046 W/m·K
- Tensile Strength: 15 MPa (2 ksi)
- Tensile Elongation at Break: 8%
- Adhesive Strength (180° peel, 3-day RT dwell, AZ film on 2 mil Al foil): >200 N/m (1.1 lbf/in)
- Glass Transition / Decomposition Temperature: 305°C (580°F) Tg / 410°C (770°F) decomposition (10 wt% loss)
- Thickness: 240 µm (9.5 mil)
Multilayer Aerogel Thermal Protection Laminate with Silicone PSA TripleZero TPS 300
TripleZero TPS 300 is a three-layer AeroZero® polyimide aerogel thermal protection laminate, 570 µm (22.4 mil) thick, bonded with a silicone pressure-sensitive adhesive and rated 0.036 W/m·K thermal conductivity at 25 °C. It carries a UL94 V-0 flammability rating and a Pass on the FAR Part 25 Appendix F 12 second vertical burn test, with a glass transition temperature of 305 °C (580 °F) and a decomposition temperature of 400 °C (600 °F). The adhesive side is protected by a release liner that is removed prior to permanent bonding.
Key Properties
- Thermal Conductivity (25 °C): 0.036 W/m·K
- FAR Part 25 Appendix F Flammability (12 s vertical burn, Part 1(a)(1)(ii)): Pass
- UL94 Flammability Rating: V-0
- Temperature Resistance (Glass Transition / Decomposition): 305 °C (580 °F) / 400 °C (600 °F)
- Tensile Strength: 7.1 MPa (1.0 ksi)
- Total Thickness: 570 µm (22.4 mil)
Five-Layer AeroZero® Aerogel Thermal Protection System, Acrylic Adhesive QuinZero TPS 501
QuinZero TPS 501 is a five-layer AeroZero® polyimide aerogel thermal protection system with a 952.5 µm (37.5 mil) total construction thickness and a basis weight of 390 g/m², with each aerogel layer bonded by a 25.4 micron (1 mil) acrylic pressure-sensitive adhesive. The construction delivers a thermal conductivity of 0.037 W/m·K at 25°C and a glass transition temperature of 305°C (580°F), with a tensile strength of 6.5 MPa (0.94 ksi) and 6.0% elongation at break. The acrylic adhesive provides greater than 280 N/m (1.6 lbf/in) 72-hour peel strength to aluminum foil, enabling permanent bonding to metal, composite, and polymer substrates.
Key Properties
- Thermal Conductivity (25°C): 0.037 W/m·K
- Glass Transition Temperature (AeroZero Tg, DMA): 305°C (580°F)
- Adhesive Strength — 72 hr. Peel Strength to 2 mil Aluminum Foil: >280 N/m (1.6 lbf/in)
- Tensile Strength: 6.5 MPa (0.94 ksi)
- Thickness: 952.5 µm (37.5 mil)
- Basis Weight: 390 g/m²
AeroZero® Polyimide Aerogel Film with Silicone Pressure-Sensitive Adhesive AZ-TPS 100
AZ-TPS 100 is an ultra-thin, adhesive-backed thermal protection film built from a 165 micron (6.5 mil) AeroZero® polyimide aerogel layer laminated to a 25.4 micron (1 mil) silicone pressure-sensitive adhesive, yielding a total construction thickness of 190 µm (7.5 mil) and a thermal conductivity of 0.038 W/m·K at 25°C. The film retains a glass transition temperature of 305°C (580°F), with thermal decomposition (10% weight loss) not occurring until 410°C (770°F), and carries a UL94 VTM-0 flame retardant rating. Its silicone adhesive provides permanent bonding to stainless steel, aluminum, glass, carbon fiber, and polymer substrates.
Key Properties
- Thermal Conductivity (25°C): 0.038 W/m·K (0.264 BTU·in/hr·ft²·°F)
- Total Thickness: 190 µm (7.5 mil)
- Tensile Strength: 7.2 MPa (1.0 ksi)
- Glass Transition Temperature (AZ Tg, DMA): 305°C (580°F)
- Adhesive Peel Strength (180° peel, 3-day RT dwell, on 2 mil Al foil): >300 N/m (1.7 lbf/in)
- UL Flammability Rating: UL94 VTM-0
AeroZero® Polyimide Aerogel Film with Double-Sided Silicone Pressure-Sensitive Adhesive AZ-TPS 101
AZ-TPS 101 is a 216 micron (8.5 mil) thermal protection film consisting of a 165 micron (6.5 mil) AeroZero® polyimide aerogel core bonded between two 25.4 micron (1 mil) silicone pressure-sensitive adhesive layers, with a density of 0.50 g/cm³. The film provides a thermal conductivity of 0.040 W/m·K at 25°C, a decomposition temperature of 380°C (716°F), and a UL94 VTM-0 flammability rating. Adhesive strength exceeds 300 N/m (1.7 Lbf/in) to aluminum foil after a 3-day room-temperature dwell, supporting permanent, flexible bonding to metal, glass, carbon fiber, and polymer substrates.
Key Properties
- Thermal Conductivity (25°C): 0.040 W/m·K
- Thickness: 216 µm (8.5 mil)
- Adhesive Strength (180° peel, 3-day RT dwell, AZ film on 2 mil Al foil): >300 N/m (1.7 Lbf/in)
- Decomposition Temp (10 wt% loss, TGA): 380°C (716°F)
- Glass Transition Temp (AZ Tg, DMA): 305°C (580°F)
- UL Flammability Rating: VTM-0
ProCell™ EV Firewall Barrier
ProCell™ EV Firewall Barrier is a specially formulated cellular silicone elastomer designed to delay thermal runaway and temperature spikes within electric vehicle battery packs, available in thicknesses from 0.059" to 0.118" with a density range of 24.97–44.76 lb/ft³ per ASTM D1056. It achieves a compression set of 3.0% at 22 hours @ 212°F @ 50% per ASTM D1056, a dielectric strength of 6.1 kV/mm, and a thermal conductivity of 0.15 W/m·K at both 122°F and 392°F per ASTM D5470. The material meets UL 94 V-0/5VA (certified for 0.118" or thicker, tested at a 3rd party lab).
Key Properties
- Compression Force Deflection Range @ 25%: 7.25 – 18.13 psi (ASTM D1056)
- Tensile: 80.5 psi (ASTM D412)
- Elongation: 132% (ASTM D412)
- Compression Set, 22 Hours @ 212°F @ 50%: 3.0% (ASTM D1056)
- Density Range: 24.97 – 44.76 lb/ft³ (ASTM D1056)
- Thermal Conductivity @ 122°F / 392°F: 0.15 W/m·K / 0.15 W/m·K (ASTM D5470)
AP/ArmaFlex® Prefabricated Fittings
AP/ArmaFlex Prefabricated Fittings are made-to-order closed-cell elastomeric foam elbows, tees, and traps engineered to match the AP/ArmaFlex and AP/ArmaFlex White pipe insulation systems, available in wall thicknesses up to 2" (50 mm). The fittings are rated for continuous service from -297°F to 220°F (-183°C to 105°C) in NBR/PVC-based constructions up to 1" wall thickness, and from -297°F to 300°F (-183°C to 150°C) in EPDM-based constructions at 1-1/2" and 2" wall thicknesses, per ASTM C534. Offered in black or white, the fittings eliminate on-site cutting and fabrication of elbows and tees while preserving the thermal and moisture-resistance integrity of the overall insulation system.
Key Properties
- Service Temperature Range (3/8" – 1" Walls, NBR/PVC-based): -297°F to 220°F (-183°C to 105°C), per ASTM C534
- Service Temperature Range (1-1/2" and 2" Walls, EPDM-based): -297°F to 300°F (-183°C to 150°C), per ASTM C534
- Wall Thickness Range: 1/2" (13 mm), 3/4" (19 mm), 1" (25 mm), 1-1/2" (38 mm), 2" (50 mm)
- Color: Black or White
- Product Range: 2-piece 90° elbows, 3-piece 90° elbows, tees, 45° elbows, "P" traps
- Antimicrobial Protection: Made with EPA registered MICROBAN® antimicrobial product protection
AP/ArmaFlex Grooved Fittings
AP/ArmaFlex Grooved Fittings are made-to-order prefabricated closed-cell elastomeric foam covers engineered for grooved couplings and iron pipe fittings, available in wall thicknesses of 1", 1-1/2", and 2" (25, 38, 50 mm) for fitting sizes up to 10" IPS. They deliver thermal protection and condensation resistance across a full service temperature range of -183°C to 105°C (-297°F to 220°F), per ASTM C534. Made-to-order fabrication allows one-step field installation over Victaulic®- and Gruvlok®-style grooved couplings, eliminating job-site cutting and gluing.
Key Properties
- Service Temperature Range (Full Range): -183°C to 105°C (-297°F to 220°F), per ASTM C534
- Standard Wall Thicknesses: 1", 1-1/2", 2" (25, 38, 50 mm)
- Fitting Size Capability: Wall thicknesses up to 2"; ID up to 10" IPS
- Material Classification: ASTM C534, Type II - Sheet Grade 1; ASTM D1056, 2C1
- Surface Burning Characteristics: Conforms to ASTM E84, UL 723; CAN/ULC S102 (up to 1" thickness)
- Antimicrobial Protection: Made with EPA registered MICROBAN® antimicrobial product protection
AeroZero® Polyimide Aerogel Film with Silicone Pressure-Sensitive Adhesive AZ-TPS 100
AZ-TPS 100 is an ultra-thin, adhesive-backed thermal protection film built from a 165 micron (6.5 mil) AeroZero® polyimide aerogel layer laminated to a 25.4 micron (1 mil) silicone pressure-sensitive adhesive, yielding a total construction thickness of 190 µm (7.5 mil) and a thermal conductivity of 0.038 W/m·K at 25°C. The film retains a glass transition temperature of 305°C (580°F), with thermal decomposition (10% weight loss) not occurring until 410°C (770°F), and carries a UL94 VTM-0 flame retardant rating. Its silicone adhesive provides permanent bonding to stainless steel, aluminum, glass, carbon fiber, and polymer substrates.
Key Properties
- Thermal Conductivity (25°C): 0.038 W/m·K (0.264 BTU·in/hr·ft²·°F)
- Total Thickness: 190 µm (7.5 mil)
- Tensile Strength: 7.2 MPa (1.0 ksi)
- Glass Transition Temperature (AZ Tg, DMA): 305°C (580°F)
- Adhesive Peel Strength (180° peel, 3-day RT dwell, on 2 mil Al foil): >300 N/m (1.7 lbf/in)
- UL Flammability Rating: UL94 VTM-0
AeroZero® Polyimide Aerogel Film with Double-Sided Silicone Pressure-Sensitive Adhesive AZ-TPS 101
AZ-TPS 101 is a 216 micron (8.5 mil) thermal protection film consisting of a 165 micron (6.5 mil) AeroZero® polyimide aerogel core bonded between two 25.4 micron (1 mil) silicone pressure-sensitive adhesive layers, with a density of 0.50 g/cm³. The film provides a thermal conductivity of 0.040 W/m·K at 25°C, a decomposition temperature of 380°C (716°F), and a UL94 VTM-0 flammability rating. Adhesive strength exceeds 300 N/m (1.7 Lbf/in) to aluminum foil after a 3-day room-temperature dwell, supporting permanent, flexible bonding to metal, glass, carbon fiber, and polymer substrates.
Key Properties
- Thermal Conductivity (25°C): 0.040 W/m·K
- Thickness: 216 µm (8.5 mil)
- Adhesive Strength (180° peel, 3-day RT dwell, AZ film on 2 mil Al foil): >300 N/m (1.7 Lbf/in)
- Decomposition Temp (10 wt% loss, TGA): 380°C (716°F)
- Glass Transition Temp (AZ Tg, DMA): 305°C (580°F)
- UL Flammability Rating: VTM-0
AeroZero® Polyimide Aerogel Low Outgassing Configurations – Acrylic Adhesive AZ-TPS 102 / AZ-TPS 103 / AZ-TPS 104
AZ-TPS 102, AZ-TPS 103, and AZ-TPS 104 are the Low Outgassing Configurations of the AZ-TPS product line, each combining a 165 micron (6.5 mil) AeroZero® polyimide aerogel film with an acrylic pressure-sensitive adhesive (PSA) bonding layer sized to the specific grade, yielding total construction thicknesses of 223.5 µm (8.8 mil), 292.1 µm (11.5 mil), and 190.5 µm (7.5 mil) respectively. AZ-TPS 102 and AZ-TPS 104 carry ASTM E595 outgassing data on the Blueshift TDS (TML <1%, CVCM <0.1%); AZ-TPS 103 appears in Blueshift's product portfolio without a published E595 line, so request the data before assigning it vacuum or optics-adjacent duty. The grades deliver thermal conductivities between 0.037–0.049 W/m·K with a 305°C (580°F) glass transition temperature. The grades differ primarily in acrylic adhesive thickness and the resulting bond strength, tensile performance, and total film thickness.
Key Properties
- Thickness: 223.5 µm / 8.8 mil (AZ-TPS 102); 292.1 µm / 11.5 mil (AZ-TPS 103); 190.5 µm / 7.5 mil (AZ-TPS 104) — ASTM D374/D374M
- Thermal Conductivity (25°C): 0.041 W/m·K (AZ-TPS 102); 0.049 W/m·K (AZ-TPS 103); 0.037 W/m·K (AZ-TPS 104) — ASTM C518
- Adhesive Strength (72 hr Peel Strength to 2 mil Aluminum Foil): >300 N/m / 1.7 lbf/in (AZ-TPS 102); >200 N/m / 1.1 lbf/in (AZ-TPS 103); >300 N/m / 1.7 lbf/in (AZ-TPS 104) — ASTM D3330
- Tensile Strength: 6.5 MPa / 0.94 ksi (AZ-TPS 102); 4.4 MPa / 0.64 ksi (AZ-TPS 103); 7.5 MPa / 1.09 ksi (AZ-TPS 104) — ASTM D882
- Glass Transition Temperature (AZ Tg, DMA): 305°C (580°F) — all three grades — ASTM E1640
- Outgassing (TML / CVCM): TML <1%, CVCM <0.1% — AZ-TPS 102 and AZ-TPS 104 (published); AZ-TPS 103 not published — ASTM E595
- Decomposition Temperature (10 wt% loss, TGA): 261°C / 502°F (AZ-TPS 102); 273°C / 523°F (AZ-TPS 103); 255°C / 491°F (AZ-TPS 104) — the acrylic adhesive lowers the ceiling versus the silicone-PSA grades — ASTM E2550
AeroZero® Polyimide Aerogel Film with Graphite Facing AZ-TPS GR 100
AZ-TPS GR 100 is a 267 micron (10.5 mil) thermal protection film construction consisting of a 50.8 micron (2 mil) graphite outer layer, a 165 micron (6.5 mil) AeroZero® polyimide aerogel core, and a silicone pressure-sensitive adhesive bonding layer, with a thermal conductivity of 0.053 W/m·K. The construction is rated to a 305 °C (580 °F) glass transition temperature with heat resistance greater than 1000 °F (538 °C), and carries a UL94 VTM0 (TM-0) flame-retardant rating. The silicone PSA layer, protected by a release liner prior to application, bonds to substrates including stainless steel, aluminum, glass, carbon fiber, and various polymers.
Key Properties
- Thermal Conductivity: 0.053 W/m·K (25 °C), ASTM C518
- Heat Resistance / Glass Transition Temp: 305 °C (580 °F) Tg; heat resistance > 1000 °F (538 °C)
- Tensile Strength: 4.5 MPa (0.65 ksi), ASTM D882
- Thickness: 267 µm (10.5 mil)
- Density: 0.70 g/cm³, ASTM D202
- Adhesive Strength (180° Peel): > 300 N/m (1.7 lbf/in), 3-day RT dwell on Al foil, ASTM D3330
ArmaFlex® Ultima
ArmaFlex Ultima is a closed-cell, flexible elastomeric insulation that is UL Listed and Labeled to UL 723 with a Flame Spread Index below 25 and a Smoke Developed Index below 50. It performs across a service temperature range of -50°C to 110°C (-58°F to 230°F) with a declared thermal conductivity as low as 0.039 W/(m·K), providing reliable condensation control and long-term energy efficiency. Built on ArmaPrene™ Technology and identified by its distinctive blue color, it is FM Approved to FM 4924 and compliant with the IMO 2010 FTP Code Part 5, making it Armacell's best-in-class plenum-rated solution for fire safety among flexible closed-cell elastomeric insulations.
Key Properties
- Thermal Conductivity (Declared, λd): ≤0.039 W/(m·K) at 50°F (10°C) rising to ≤0.044 W/(m·K) at 125°F (52°C) (ASTM C518, EN ISO 13787, EN 12667, EN ISO 8497)
- Water Vapor Permeability: 0.02 perm-inch (7,000 mu) (ASTM E96, Procedure A, EN 12086, EN 13469)
- Service Temperature Range: -50°C to 110°C (-58°F to 230°F) (ASTM C534)
- Fire Performance: UL Listed and Labeled, UL File No. R39561, 25/50 rating — Flame Spread Index less than 25, Smoke Developed Index less than 50 (ASTM E84, UL 723)
- Density: 3 to 6 pounds per cubic foot (48 to 96 kilograms per cubic meter) (ASTM D1667)
- Water Absorption: 0.2% by volume (ASTM C1763, Procedure B)
Dual-Layer AeroZero® Polyimide Aerogel Graphite Thermal Protection Film with Silicone PSA DualZero TPS GR 201
DualZero TPS GR 201 is a dual-layer AeroZero® polyimide aerogel thermal protection film construction with an external graphite film and a silicone pressure-sensitive adhesive (PSA) bonding layer, with an overall thickness of 483 µm (19.0 mil) and a density of 0.65 g/cm³. It carries a UL94 V-0 flammability rating with a decomposition temperature (10 wt% loss, TGA) of 410°C (770°F) and a thermal conductivity of 0.045 W/m·K at 25°C. Adhesive strength exceeds 380 N/m (2.1 lbf/in) on aluminum foil, enabling permanent bonding to metal, composite, and polymer substrates.
Key Properties
- Thermal Conductivity (25°C): 0.045 W/m·K
- Decomposition Temp (10 wt% loss, TGA): 410°C (770°F)
- UL Flammability Rating: V-0 (UL94 V-0)
- Adhesive Strength (180° peel, AZ film on 2 mil Al foil): >380 N/m (2.1 Lbf/in)
- Tensile Strength: 6.7 MPa (0.9 ksi)
- Thickness: 483 µm (19.0 mil)
AP/ArmaFlex + AP/ArmaFlex FS
AP/ArmaFlex and AP/ArmaFlex FS are closed-cell flexible elastomeric insulation materials with a declared thermal conductivity (λd) as low as 0.034 W/(m·K) [k ≤ 0.235 Btu·in/(h·ft²·°F)] at 50°F (10°C) and a density of 3 to 6 lb/ft³ (48 to 96 kg/m³). Both grades are rated for continuous service from -297°F (-183°C) up to 220°F (105°C) for NBR/PVC-based constructions, while 1-1/2" and 2" wall EPDM-based constructions are rated up to 300°F (149°C), and both achieve a surface burning rating of Flame Spread Index less than 25 and Smoke Developed Index less than 50 per ASTM E84/UL 723. AP/ArmaFlex is manufactured from nitrile rubber/polyvinyl chloride (NBR/PVC) for wall thicknesses up to and including 1", while AP/ArmaFlex FS and insulation thicknesses greater than 1" are manufactured from PVC-free Ethylene Propylene Diene Monomer (EPDM).
Key Properties
- Thermal Conductivity (λd), Declared: AP/ArmaFlex (NBR/PVC, 3/8"–2" walls): ≤0.034–0.039 W/(m·K) [k ≤0.235–0.268 Btu·in/(h·ft²·°F)] across 50°F–125°F (10°C–52°C) / AP/ArmaFlex FS (EPDM, 1-1/2" & 2" walls): ≤0.040–0.043 W/(m·K) [k ≤0.278–0.300 Btu·in/(h·ft²·°F)] across the same temperature range
- Water Vapor Permeability: AP/ArmaFlex (NBR/PVC): 0.05 perm-inch (0.725 × 10⁻¹³ kg/(s·m·Pa)) / AP/ArmaFlex FS (EPDM): 0.08 perm-inch (1.16 × 10⁻¹³ kg/(s·m·Pa))
- Service Temperature Range: AP/ArmaFlex (NBR/PVC, all walls): -297°F to 220°F (-183°C to 105°C) / AP/ArmaFlex FS (EPDM, 1-1/2" & 2" walls): -297°F to 300°F (-183°C to 149°C)
- Fire Performance: Flame Spread Index less than 25, Smoke Developed Index less than 50 (AP/ArmaFlex tube insulation all thicknesses; AP/ArmaFlex FS sheet/roll through 2"; AP/ArmaFlex sheet/roll through 1" — 1-1/2" and 2" sheet/roll NOT 25/50 rated) per ASTM E84, UL 723
- Density: 3 to 6 lb/ft³ (48 to 96 kg/m³)
- Water Absorption: 0.2% by volume
Quad-Layer AeroZero® Polyimide Aerogel Graphite Thermal Protection Film QuadZero TPS GR 400
QuadZero TPS GR 400 is a multilayer AeroZero® polyimide aerogel thermal protection film built from four 165 micron (6.5 mil) AeroZero layers bonded with silicone pressure-sensitive adhesive beneath an external 127 micron (5 mil) graphite face layer, with a total construction thickness of 838 µm (33 mil) and a density of 0.55 g/cm³. The construction delivers a thermal conductivity of 0.044 W/m·K at 25°C and remains stable to a glass transition temperature of 305°C (580°F), with decomposition onset at 425°C (797°F). Blueshift lists QuadZero as a layering configuration of the AeroZero TPS line and does not currently publish a stand-alone QuadZero data sheet; the flammability class and any vertical-burn result for this laminate are per the TDS on file and should be confirmed against Blueshift's current data before it is assigned fire-barrier duty. For a published FAR 25 Appendix F 12-second vertical-burn pass with UL 94 V-0, see TripleZero TPS 300.
Key Properties
- Tensile Strength: 7.5 MPa (1.1 ksi)
- Tensile Elongation at Break: 7%
- Thermal Conductivity (25°C): 0.044 W/m·K
- Temperature Resistance: Glass Transition Temperature (AeroZero Tg, DMA) 305°C (580°F); Decomposition Temperature (10 wt% loss, TGA) 425°C (797°F)
- Thickness: 838 µm (33 mil)
- Density: 0.55 g/cm³
AP/ArmaFlex® Self-Adhesive
AP/ArmaFlex Self-Adhesive is a black, flexible, closed-cell elastomeric thermal and acoustical insulation available in Black LapSeal tube, sheet, and roll forms with a factory-applied self-adhesive backing that eliminates field-applied contact adhesive. It is rated for continuous service from -34°C to 82°C (-30°F to 180°F) and, depending on form and thickness, carries a Flame Spread Index below 25 and Smoke Developed Index below 50 per ASTM E84/UL 723. AP/ArmaFlex SA is NBR-based through 2" thickness, while AP/ArmaFlex FS SA (1-1/2" and 2" thickness) is EPDM-based for enhanced fire performance.
Key Properties
- Thermal Conductivity (k-value): λd ≤ 0.0353 W/(m·K) [k ≤ 0.245 Btu·in/(h·ft²·°F)] at 75°F (24°C) for NBR-based products (AP/ArmaFlex pipe insulation through 1" thickness and AP/ArmaFlex SA 1-1/2" and 2" wall thickness); λd ≤ 0.040 W/(m·K) [k ≤ 0.28 Btu·in/(h·ft²·°F)] at 75°F (24°C) for EPDM-based products (AP/ArmaFlex pipe insulation and FS SA through 1-1/2" and 2") — ASTM C177, ASTM C518
- Water Vapor Diffusion Resistance Factor: 0.05 perm-inch (0.725 × 10⁻¹³ kg/(s·m·Pa)) for NBR/PVC products; 0.08 perm-inch (1.16 × 10⁻¹³ kg/(s·m·Pa)) for EPDM products — ASTM E96 (Desiccant Method)
- Service Temperature Range: Full range -34°C to 82°C (-30°F to 180°F); 82°C (180°F) applies to full bonding sheet insulation — ASTM C534
- Fire Performance: Flame Spread Index less than 25; Smoke Developed Index less than 50 (AP/ArmaFlex Black LapSeal tube insulation all thicknesses; AP/ArmaFlex SA FS sheet and roll insulation through 2" thickness; AP/ArmaFlex SA sheet and roll insulation through 1" thickness — 1-1/2" and 2" SA sheet/roll thicknesses are NOT 25/50 rated) — ASTM E84, UL 723, CAN/ULC S102
- Density: 3 to 6 pounds per cubic foot (48 to 96 kilos per cubic meter) — ASTM D1667
- Water Absorption: 0.2% by volume — ASTM C1763, ASTM C2094
Multilayer Polyimide Aerogel Thermal Protection Film with Silicone PSA AZ-TPS PI 100
AZ-TPS PI 100 is a 240 micron (9.5 mil) multilayer thermal protection film built around a 165 micron (6.5 mil) AeroZero® polyimide aerogel core, faced with polyimide films and silicone pressure-sensitive adhesive (PSA) layers, delivering a thermal conductivity of 0.046 W/m·K at 25°C. The silicone PSA bonds to stainless steel, aluminum, glass, and polymer substrates, reaching full adhesion strength after a 3-day room-temperature dwell, and the construction carries a UL94 VTM-0 flame rating. The film remains flexible and RF transparent, suiting complex, contoured part geometries across Aerospace, Defense, and Electronics applications.
Key Properties
- Thermal Conductivity (25°C): 0.046 W/m·K
- Tensile Strength: 15 MPa (2 ksi)
- Tensile Elongation at Break: 8%
- Adhesive Strength (180° peel, 3-day RT dwell, AZ film on 2 mil Al foil): >200 N/m (1.1 lbf/in)
- Glass Transition / Decomposition Temperature: 305°C (580°F) Tg / 410°C (770°F) decomposition (10 wt% loss)
- Thickness: 240 µm (9.5 mil)
ArmaFlex® Shield
ArmaFlex Shield is a pre-jacketed flexible pipe insulation featuring a factory-applied, moisture- and UV-resistant polymeric jacket over an ArmaFlex insulation core, with a declared thermal conductivity as low as 0.036 W/(m·K) (0.25 Btu·in/(h·ft²·°F)) at 75°F. It is rated for continuous service from -297°F to 220°F (-183°C to 104°C) per ASTM C534, and carries a 25/50 flame spread/smoke developed rating per ASTM E84 and UL 723. The durable outer jacket eliminates the need for field-applied protective coatings or additional jacketing in outdoor applications.
Key Properties
- Thermal Conductivity (λd): ≤ 0.036 W/(m·K) at 75°F Θm / ≤ 0.037 W/(m·K) at 100°F Θm — k ≤ 0.25 Btu·in/(h·ft²·°F) at 75°F / ≤ 0.257 Btu·in/(h·ft²·°F) at 100°F
- Water Vapor Permeability: 0.03 Perm-in (0.435 × 10⁻¹³ kg/(s·m·Pa)) — meets Class 1 rating per ASTM E96, procedure A
- Service Temperature Range: -183°C to 104°C (-297°F to 220°F) per ASTM C534
- Fire Performance: Flame Spread Index less than 25, Smoke Developed Index less than 50 — 25/50 rated per ASTM E84 and UL 723
- Wall Thickness / Size Range: 1/2" (13 mm), 3/4" (19 mm), and 1" (25 mm) wall thicknesses in ID sizes from 1/4" to 1-1/8" (6 mm to 28 mm), depending on wall thickness
- Water Absorption: 0.2%
Vapor Deposited Aluminum Polyimide Aerogel Thermal Protection Film AZ-TPS VDA PI 100
AZ-TPS VDA PI 100 is a 240 μm (9.5 mil) thermal protection film built around a 165 μm (6.5 mil) AeroZero® polyimide aerogel core laminated between 25.4 μm (1 mil) polyimide face films, with one face vapor-deposited with a 1000 Å reflective aluminum (VDA) layer. The opposite face carries a 25.4 μm (1 mil) silicone pressure-sensitive adhesive with a peel-away release liner for direct bonding to metal, glass, and polymer substrates. The construction delivers 0.94 IR reflectivity, 0.046 W/m·K thermal conductivity, and a UL94 VTM-0 flame rating for thermal barrier applications.
Key Properties
- Thermal Conductivity (25°C): 0.046 W/m·K (0.319 BTU·in/hr·ft²·°F), per ASTM C518-10
- IR Reflectivity (VDA-PI Surface): 0.94, per ASTM E408-13
- Tensile Strength: 15 MPa (2 ksi), per ASTM D882-12
- Adhesive Strength: >300 N/m (1.1 lbf/in), 180° peel/3 day-RT dwell, AZ film on 50.8 μm (2 mil) Al foil, per ASTM D3330
- Thermal Stability: Glass Transition (AZ Tg, DMA) 305°C (580°F); Decomposition (10 wt% loss, TGA) 410°C (770°F)
- Thickness: 240 μm (9.5 mil)
ArmaFlex® UT
ArmaFlex UT is a black, EPDM-based, flexible closed-cell elastomeric insulation available in tubular pipe form and roll form, engineered for upper-temperature mechanical insulation service up to 300°F continuous (350°F intermittent). It maintains a full service temperature range of -297°F to 350°F (intermittent) per ASTM C534, provides low water vapor permeability (0.08 Perm-in) to guard against condensation and mold growth, and carries a 25/50 flame spread/smoke developed rating. The material is low-VOC, non-halogen, and PVC-free.
Key Properties
- Thermal Conductivity (k-value): λd ≤ 0.040 W/(m·K) [k ≤ 0.28 Btu·in/(h·ft²·°F)] at 75°F (24°C) mean temperature, per ASTM C518, ASTM C177
- Water Vapor Permeability: 0.08 Perm-in (1.16 × 10⁻¹³ kg/s·m·Pa), per ASTM E96, Procedure A
- Service Temperature Range: -297°F to 300°F (continuous, full range), 350°F max (intermittent, 30 min per 24-hr operating period), per ASTM C534
- Fire Performance: Flame Spread Index < 25, Smoke Developed Index < 50 (25/50 rated), per ASTM E84 and UL 723
- Density: 3 to 6 lb/ft³ (48 to 96 kg/m³), per ASTM D1667
- Water Absorption: 0.2%, per ASTM C1763, Procedure B
Multilayer Aerogel Thermal Protection Laminate with Silicone PSA TripleZero TPS 300
TripleZero TPS 300 is a three-layer AeroZero® polyimide aerogel thermal protection laminate, 570 µm (22.4 mil) thick, bonded with a silicone pressure-sensitive adhesive and rated 0.036 W/m·K thermal conductivity at 25 °C. It carries a UL94 V-0 flammability rating and a Pass on the FAR Part 25 Appendix F 12 second vertical burn test, with a glass transition temperature of 305 °C (580 °F) and a decomposition temperature of 400 °C (600 °F). The adhesive side is protected by a release liner that is removed prior to permanent bonding.
Key Properties
- Thermal Conductivity (25 °C): 0.036 W/m·K
- FAR Part 25 Appendix F Flammability (12 s vertical burn, Part 1(a)(1)(ii)): Pass
- UL94 Flammability Rating: V-0
- Temperature Resistance (Glass Transition / Decomposition): 305 °C (580 °F) / 400 °C (600 °F)
- Tensile Strength: 7.1 MPa (1.0 ksi)
- Total Thickness: 570 µm (22.4 mil)
AP/ArmaFlex® W
AP/ArmaFlex W is an off-white, fiber-free, closed-cell elastomeric thermal insulation supplied in tubular pipe form, with nominal wall thicknesses from 1/2" to 1-1/2" and tubular inside diameters from 1/2" up to 6 IPS. It carries a declared thermal conductivity as low as 0.034 W/(m·K) at 50°F mean temperature and is rated for service from -297°F to 220°F (3/8" through 1" walls) or up to 300°F (1-1/2" EPDM-based wall). It is available with or without a factory-applied self-seal (lap seal) closure system for labor-saving field installation.
Key Properties
- Thermal Conductivity: λd ≤ 0.034 W/(m·K) [k ≤ 0.235 Btu·in/(h·ft²·°F)] at 50°F Mean Temperature, 3/8" through 1" walls (NBR/PVC-based); λd ≤ 0.040 W/(m·K) [k ≤ 0.278 Btu·in/(h·ft²·°F)] at 50°F Mean Temperature, 1-1/2" wall (EPDM-based) — ASTM C518, ASTM C177
- Water Vapor Permeability: 0.05 perm-inch (0.725 x 10⁻¹³ kg/(s·m·Pa)) for NBR/PVC products; 0.08 perm-inch (1.16 x 10⁻¹³ kg/(s·m·Pa)) for EPDM products — ASTM E96 Desiccant Method
- Service Temperature Range: -183°C to 105°C (-297°F to 220°F) for 3/8" through 1" walls (NBR/PVC-based); -183°C to 150°C (-297°F to 300°F) for 1-1/2" wall (EPDM-based) — ASTM C534
- Fire Performance: Flame Spread Index less than 25; Smoke Developed Index less than 50; 25/50 rated — ASTM E84 and UL 723
- Density: 3 to 6 lb/ft³ (48 to 96 kg/m³) — ASTM D1667
- Water Absorption: 0.2% by volume — ASTM C1763, ASTM C2093
Five-Layer AeroZero® Aerogel Thermal Protection System, Acrylic Adhesive QuinZero TPS 501
QuinZero TPS 501 is a five-layer AeroZero® polyimide aerogel thermal protection system with a 952.5 µm (37.5 mil) total construction thickness and a basis weight of 390 g/m², with each aerogel layer bonded by a 25.4 micron (1 mil) acrylic pressure-sensitive adhesive. The construction delivers a thermal conductivity of 0.037 W/m·K at 25°C and a glass transition temperature of 305°C (580°F), with a tensile strength of 6.5 MPa (0.94 ksi) and 6.0% elongation at break. The acrylic adhesive provides greater than 280 N/m (1.6 lbf/in) 72-hour peel strength to aluminum foil, enabling permanent bonding to metal, composite, and polymer substrates.
Key Properties
- Thermal Conductivity (25°C): 0.037 W/m·K
- Glass Transition Temperature (AeroZero Tg, DMA): 305°C (580°F)
- Adhesive Strength — 72 hr. Peel Strength to 2 mil Aluminum Foil: >280 N/m (1.6 lbf/in)
- Tensile Strength: 6.5 MPa (0.94 ksi)
- Thickness: 952.5 µm (37.5 mil)
- Basis Weight: 390 g/m²
ArmaFlex® Coil
ArmaFlex Coil is a flexible, closed-cell elastomeric foam pipe insulation supplied in continuous-length coils, with a declared thermal conductivity (λd) of ≤0.036 W/(m·K) at 75°F (24°C) mean temperature. It is rated for continuous service from -183°C to 105°C (-297°F to 220°F) and carries a 25/50 flame spread/smoke developed rating per ASTM E84. Manufactured without CFCs, HCFCs, HFCs, PBDEs, or formaldehyde, it is fiber free, dust free, and resists mold and mildew growth.
Key Properties
- Thermal Conductivity (Declared λd): ≤0.036 W/(m·K) at 75°F mean temperature (24°C); ≤0.037 W/(m·K) at 90°F mean temperature (32°C) — k ≤0.25 Btu·in/(h·ft²·°F) at 75°F, k ≤0.256 Btu·in/(h·ft²·°F) at 90°F (ASTM C518, ASTM C177)
- Water Vapor Permeability: 0.05 perm-inch (0.725 × 10⁻¹³ Kg/(s·m·Pa)) (ASTM E96, Procedure A)
- Service Temperature Range: -183°C to 105°C (-297°F to 220°F); for applications below -50°C (-58°F), contact Armacell technical team (ASTM C534)
- Fire Performance: Flame Spread Index less than 25, Smoke Developed Index less than 50 (25/50 rated) (ASTM E84)
- Water Absorption: 0.2% by volume (ASTM C209, ASTM C1763)
- Mold Growth Resistance: Pass (ASTM C1338, ASTM G21)
Pyrogel XTF
Pyrogel XTF is a hydrophobic, breathable aerogel blanket insulation rated for continuous use from ambient to 650°C (1200°F), combining passive fire protection with thermal insulation in a thin, lightweight format. It delivers hydrocarbon pool-fire protection for up to 3 hours and jet fire protection for up to 2 hours, and can be used to meet API 521 requirements for the sizing of pressure relief systems. The material resists liquid water and the damaging effects of corrosion under insulation/fireproofing (CUI/CUF), and installs in all weather conditions with no cure or drying time required.
Key Properties
- Thermal Conductivity (32°F / 0°C): 0.14 BTU-in/hr-ft²-°F (20 mW/m-K) — ASTM C177
- Max. Use Temperature: 650°C (1200°F) — ASTM C447
- Density: 12.5 lb/ft³ (0.20 g/cc) — Nominal
- Compressive Resistance: ≥ 3 psi (20.7 kPa) @ 10% deformation — ASTM C1651
- Surface Burning Characteristics: Flame Spread Index ≤ 5, Smoke Developed Index ≤ 10 — ASTM E84
- Water Vapor Sorption: ≤ 5% (by weight); Hydrophobic — ASTM C1104/1104M
AP/ArmaFlex® Duct Liner/Wrap
AP/ArmaFlex Duct Liner/Wrap is a black, flexible, fiber-free, closed-cell elastomeric duct insulation supplied in sheet and roll form, with a declared thermal conductivity as low as 0.0353 W/(m·K) at 75°F (24°C) for NBR/PVC-based walls. It is rated for service from -297°F to 220°F (-183°C to 105°C) on 3/8" through 1" NBR/PVC-based walls, or up to 300°F (150°C) on 1-1/2" and 2" EPDM-based walls, and is available with or without factory-applied pressure-sensitive adhesive (PSA). Surface burning characteristics meet a 25/50 rating (Flame Spread Index less than 25, Smoke Developed Index less than 50) per ASTM E84 and UL 723.
Key Properties
- Thermal Conductivity: λd ≤ 0.0353 W/(m·K) at 75°F (24°C) [k ≤ 0.245 Btu·in/(h·ft²·°F)] for 3/8" through 1" NBR/PVC walls; λd ≤ 0.040 W/(m·K) at 75°F (24°C) [k ≤ 0.28 Btu·in/(h·ft²·°F)] for 1-1/2" and 2" EPDM walls (ASTM C518, ASTM C177)
- Water Vapor Permeability: 0.05 perm-inch (0.725 x 10⁻¹³ kg/(s·m·Pa)) for NBR/PVC products; 0.08 perm-inch (1.16 x 10⁻¹³ kg/(s·m·Pa)) for EPDM products (ASTM E96, procedure A)
- Service Temperature Range: -297°F to 220°F (-183°C to 105°C) for 3/8" through 1" Walls (NBR/PVC-based); -297°F to 300°F (-183°C to 150°C) for 1-1/2" and 2" Walls (EPDM-based) (ASTM C534)
- Fire Performance: Flame Spread Index less than 25 and Smoke Developed Index less than 50, 25/50 rated (ASTM E84 and UL 723, CAN/ULC S102)
- Density: 3 to 6 lb/ft³ (48 to 96 kg/m³) (ASTM D1667)
- Water Absorption: 0.2% by volume (ASTM C209, ASTM C1763)
ArmaFlex® ArmaTuff
ArmaTuff is a flexible elastomeric closed-cell foam insulation factory-laminated with a 17.5 mils white protective covering, with the foam core rated to ASTM C534 Type II, Grade 1. It is rated for service from -183°C to 105°C (-297°F to 220°F) and provides a declared thermal conductivity (λd) of ≤0.036 W/(m·K) at 75°F, with the laminated jacket achieving a water vapor diffusion resistance factor of 0.00. ArmaTuff is available with or without a factory-applied pressure sensitive adhesive backing, in sheet and roll form, for exterior applications such as rooftop ducts.
Key Properties
- Thermal Conductivity: λd ≤ 0.036 W/(m·K) @ 75°F and ≤ 0.037 W/(m·K) @ 100°F; k ≤ 0.25 Btu·in/(h·ft²·°F) @ 75°F and ≤ 0.257 Btu·in/(h·ft²·°F) @ 100°F
- Water Vapor Diffusion Resistance Factor: Laminate 0.00; Foam 0.05 perm-inch (0.725 x 10⁻¹³ kg/(s·m·Pa))
- Service Temperature Range: -183°C to 105°C (-297°F to 220°F); 82°C (180°F) max for full bonding sheet insulation
- Weather and UV Resistance: UV Resistance — Excellent; Weather Resistance — Excellent
- Density: 3 to 6 pounds per cubic foot (48 to 96 kilograms per cubic meter)
- Water Absorption: 0.2% by volume
AP/CoilFlex Duct Liner
AP/CoilFlex Duct Liner is a black, fiber-free elastomeric foam duct liner based on synthetic rubber, supplied in roll form with a declared thermal conductivity of λd ≤ 0.036 W/(m·K) at 75°F for 1" thickness. It is rated for continuous service from -183°C (-297°F) to 104°C (220°F) and carries a 25/50 surface burning rating per ASTM E84. The soft, conformable foam wraps fabricated duct corners without compression while attenuating airborne HVAC noise (NRC 0.60).
Key Properties
- Thermal Conductivity (Declared, λd): ≤ 0.036 W/(m·K) [k ≤ 0.25 Btu·in/(h·ft²·°F)] at 75°F (24°C) for 1" thickness; up to ≤ 0.040 W/(m·K) [≤ 0.289 Btu·in/(h·ft²·°F)] at 100°F (38°C) for 1-1/2" thickness — ASTM C518, ASTM C177
- Service Temperature Range: Min. -183°C (-297°F) to Max. 104°C (220°F)
- Surface Burning Characteristics: Flame Spread Index less than 25; Smoke Developed Index less than 50; 25/50 Rated — ASTM E84
- Density: 3 to 6 pounds per cubic foot (48 to 96 kilograms per cubic meter) — ASTM D1667
- Noise Reduction Coefficient (NRC): 0.60 at 1" (25mm) thickness — ASTM C4232
- R-Value: 4.2 at 1" (25mm) thickness; 6 at 1-1/2" (38mm) thickness
ArmaGel® DT
ArmaGel® DT is a flexible aerogel insulation blanket with an integrated zero-perm vapour barrier, suitable for cryogenic and dual-temperature applications, available in thicknesses of 0.2", 0.4", 0.6", and 0.8" with a density of 11.5 lb/ft³ per ASTM C303. It delivers a thermal conductivity of 0.015 W/m·K at -200°F and 0.029 W/m·K at 400°F per ASTM C177, a service temperature range of -292°F to 482°F per ASTM C411, and complies with ASTM C1728 Type IV, Grade 1A. The material carries IMO 2010 FTP Code compliance for marine applications and water vapour transmission of 0.00 perm per ASTM E96 through the integrated vapour barrier.
Key Properties
- Thermal Conductivity @ -200°F: 0.015 W/m·K (ASTM C177)
- Thermal Conductivity @ 75°F: 0.021 W/m·K (ASTM C177)
- Service Temperature: -292°F minimum to 482°F maximum (ASTM C411)
- Compressive Strength @ 10% Compression: ≥ 5 psi (ASTM C165)
- Density: 11.5 lb/ft³ (ASTM C303)
- Flame Spread Index / Smoke Development: ≤ 25 / ≤ 50 (ASTM E84)
ArmaGel® HT
ArmaGel® HT is a flexible aerogel insulation blanket suitable for elevated temperature applications with a maximum service temperature of 1200°F, available in thicknesses of 0.2", 0.4", 0.6", and 0.8" with a density of 11 lb/ft³ per ASTM C303. It delivers a thermal conductivity of 0.021 W/m·K at 75°F rising to 0.043 W/m·K at 700°F per ASTM C177, and complies with ASTM C1728 Type III, Grade 1A. The material achieves a Flame Spread Index of ≤5 and Smoke Development of ≤10 per ASTM E84, and a Reaction to Fire classification of B-s1, d0 per EN 13501-1.
Key Properties
- Thermal Conductivity @ 75°F: 0.021 W/m·K (ASTM C177)
- Service Temperature Maximum: 1200°F (ASTM C411, ASTM C447)
- Compressive Strength @ 10% Compression: ≥ 3 psi (ASTM C165)
- Density: 11 lbs/ft³ (ASTM C303)
- Linear Shrinkage Under Soaking Heat: <2% in width and length (ASTM C356)
- Flame Spread Index / Smoke Development: ≤ 5 / ≤ 10 (ASTM E84)
ArmaGel® HTF
ArmaGel® HTF is a flexible silica-aerogel blanket engineered for passive fire protection, compliant with ASTM C1728 Type III, Grade 1A, UL 1709, and ISO 22899-1, available in a single standard thickness of 10 mm (0.4") in rolls 1.5 m (59") wide. It achieves 120 minutes of fire protection per UL 1709 and 90 minutes per jet fire per ISO 22899-1 in tested configurations, with a maximum operational temperature of 650°C (1200°F) per ASTM C411 and ASTM C447, and a declared thermal conductivity of 0.021 W/(m·K) (0.14 Btu-in/h-ft²-°F) at 24°C (75°F) per ASTM C177, measured under a load of 1.5 kPa (0.22 psi).
Key Properties
- Thermal Conductivity @ 24°C (75°F): 0.021 W/(m·K) / 0.14 Btu-in/(h-ft²-°F) (ASTM C177)
- Operating Temperature Maximum: 650°C (1200°F) (ASTM C411, ASTM C447)
- Fire Protection Rating — UL 1709: 120 minutes (tested configurations — see Specifications)
- Fire Protection Rating — ISO 22899-1 Jet Fire: 90 minutes (tested configurations — see Specifications)
- Compressive Strength @ 10% Compression: ≥ 3 psi / 20.7 kPa (ASTM C165)
- Flame Spread Index / Smoke Developed Index: ≤ 5 / ≤ 10 (ASTM E84)
ArmaGel® HTL
ArmaGel® HTL is a highly flexible aerogel insulation blanket with best-in-class CUI protection, suitable for high-temperature applications up to 1200°F, available in thicknesses of 0.2″, 0.4″, 0.6″ and 0.8″ (5, 10, 15 and 20 mm) in Light Gray, with a density of 9.5 lb/ft³ per ASTM C303 and KS L 9102 — the lowest density in the ArmaGel® product line. It delivers a thermal conductivity of 0.029 W/m·K at 75°F per ASTM C177, achieves a Reaction to Fire classification of A1 Non-combustible per EN 13501-1 and ISO 1182, and complies with ASTM C1728 Type V, Grade 1A.
Key Properties
- Thermal Conductivity @ 75°F: 0.029 W/m·K (ASTM C177)
- Service Temperature Maximum: 1200°F (ASTM C411, ASTM C447)
- Density: 9.5 lbs/ft³ (ASTM C303, KS L 9102)
- Reaction to Fire: A1 Non-combustible (EN 13501-1, ISO 1182)
- Flame Spread Index / Smoke Development Index: ≤ 5 / ≤ 10 (ASTM E84)
- Water Absorption: ≤ 8% by weight (ASTM C1763)
ArmaGel® Rail
ArmaGel® Rail is a double side laminated flexible aerogel insulation blanket with an integrated zero-perm vapour barrier, designed specifically for rail applications, available in thicknesses of 0.2", 0.4", 0.6", and 0.8" in Silver with a density of 11.86 lb/ft³ per ASTM C303. It delivers a declared thermal conductivity of 0.021 W/(m·K) at 75°F per ASTM C177, a service temperature maximum of 230°F, and water absorption of maximum 8% per ASTM C1763. The material is hydrophobic.
Key Properties
- Declared Thermal Conductivity @ 75°F: 0.021 W/(m·K) (ASTM C177)
- Service Temperature Maximum: 230°F
- Density: 11.86 lbs/ft³ (ASTM C303)
- Water Absorption: Maximum 8% (ASTM C1763)
- Material Type: Aerogel insulation blanket with integrated zero-prem vapour barrier
ArmaGel® XGC
ArmaGel® XGC is a flexible aerogel insulation blanket with an integrated zero-perm vapour barrier, suitable for cryogenic and dual-temperature applications, available in thicknesses of 0.2", 0.4", and 0.8" in Gray with a density of 10.6 lb/ft³ per ASTM C303. It delivers the lowest thermal conductivity in the ArmaGel® product family at 0.014 W/m·K at -200°F, a service temperature range of -292°F minimum to 482°F maximum per ASTM C411, and complies with ASTM C1728 Type 1, Grade 1B and Type IV, Grade 1A — the only grade in the ArmaGel® family to carry dual ASTM C1728 type designations. Water vapor permeance of the integrated vapor barrier is 0.00 perm per ASTM E96.
Key Properties
- Thermal Conductivity @ -200°F: 0.014 W/m·K (ASTM C177)
- Thermal Conductivity @ 75°F: 0.017 W/m·K (ASTM C177)
- Service Temperature: Min -292°F to Max 482°F (ASTM C411)
- Compressive Strength @ 10% Compression: ≥ 5 psi (ASTM C165)
- Density: 10.6 lbs/ft³ (ASTM C303)
- Flame Spread Index / Smoke Development: ≤ 25 / ≤ 50 (ASTM E84)
ArmaGel® XGH
ArmaGel® XGH is a flexible aerogel blanket for elevated temperature applications with a maximum service temperature of 650°C (1200°F), available in thicknesses of 5 mm (0.2"), 10 mm (0.4"), and 20 mm (0.8") in roll form 1.5 m (59") wide, with a nominal density of 180 kg/m³ (11 lb/ft³) per ASTM C303. It complies with ASTM C1728 Type III, Grade 1A and IOGP S-738 (JIP33), delivers a declared thermal conductivity of 0.0199 W/(m·K) at 24°C (75°F) per ASTM C177, and achieves a Reaction to Fire classification of A2-s1,d0 (Non-combustible) per EN 13501-1. Thermal conductivity values are provided across 13 temperature points from 0°C to 650°C with a published polynomial formula for use in calculation programs.
Key Properties
- Thermal Conductivity @ 24°C (75°F): 0.0199 W/(m·K) / 0.138 Btu-in/(h-ft²-°F) (ASTM C177)
- Service Temperature Maximum: 650°C (1,200°F) (ASTM C411, ASTM C447)
- Reaction to Fire: A2-s1,d0 — Non-combustible (EN 13501-1)
- Compressive Strength @ 10% Compression: ≥ 3 psi / 20.7 kPa (ASTM C165)
- Nominal Density: 180 kg/m³ (11 lb/ft³) (ASTM C303)
- Flame Spread Index / Smoke Development: ≤ 5 / ≤ 10 (ASTM E84)
Cryogel® Z
Cryogel® Z is a flexible aerogel blanket insulation engineered to deliver maximum thermal protection with minimal weight and thickness, available in thicknesses of 0.2″ and 0.4″ in White with a nominal density of 10 lb/ft³ (0.16 g/cc). It incorporates an integrated vapor retarder with water vapor transmission of ≤0.00 perms per ASTM E96 – Dry cup, achieves a compressive resistance of ≥5 psi at 10% deformation per ASTM C165, and is built for sub-ambient and cryogenic service: Aspen publishes thermal-conductivity data from −200°F (−129°C) up to its maximum use temperature of 257°F (125°C), and the blanket complies with ASTM C1728 Type I, Grade 1B. The TDS states it is proven in global LNG liquefaction and regasification facilities.
Key Properties
- Thermal Conductivity (ASTM C177): 14 mW/m·K (0.096 BTU·in/hr·ft²·°F) at −200°F; 15 at −100°F; 16 at 0°F; 17 at 75°F; 17 at 100°F; 19 mW/m·K (0.13 BTU·in/hr·ft²·°F) at 200°F
- Specification: ASTM C1728 Type I, Grade 1B (flexible aerogel insulation)
- Service Range: Sub-ambient and cryogenic to −200°F; maximum use temperature 257°F (125°C)
- Thickness: 0.2″ (5 mm) and 0.4″ (10 mm); hydrophobic
- Compressive Resistance @ 10% Deformation: ≥ 5 psi (ASTM C165)
- Water Vapor Transmission: ≤ 0.00 Perms (ASTM E96 – Dry cup)
- Density: 10 lbs/ft³
- Maximum Use Temperature: 257°F
- Linear Shrinkage Under Soaking Heat: < 2% (ASTM C356)
- Flame Spread Index / Smoke Developed Index: ≤ 25 / ≤ 50 (ASTM E84)
Pyrogel® XTE
Pyrogel® XTE is a flexible aerogel blanket insulation manufactured by integrating aerogel into a fiber-batting matrix, available in 0.2" and 0.4" thicknesses with a density of 12.5 lb/ft³. It delivers a thermal conductivity of 0.14 btu-in/hr-ft²-°F at a mean temperature of 32°F (ASTM C177), a maximum use temperature of 1200°F per ASTM C447, and complies with ASTM C1728 Type III, Grade 1A for flexible aerogel insulation. The material is hydrophobic and breathable, engineered specifically for corrosion under insulation (CUI) defense in industrial and commercial applications.
Key Properties
- Thermal Conductivity @ Mean Temperature 32°F: 0.14 btu-in/hr-ft²-°F (ASTM C177)
- Estimation of Maximum Use Temperature: 1200°F (ASTM C447)
- Compressive Resistance @ 10% Deformation: ≥ 3 psi (ASTM C165)
- Density: 12.5 lb/ft³
- Linear Shrinkage Under Soaking Heat @ 1200°F: < 2% (ASTM C356)
- Flame Spread Index / Smoke Developed Index: ≤ 5 / ≤ 10 (ASTM E84)
