AFTC 6011
AFTC 6011 is a 0.047″ thick, double-sided closed cell acrylic foam tape specifically designed for bonding steel and aluminum assemblies that are subsequently powder coated. It withstands the high temperatures of the powder coat oven and resists the chemical pre-treatment baths used in the powder coating process, remaining viscoelastic after the full process cycle. It delivers dynamic shear strength of 82 lb/in², tensile strength of 84 lb/in², and the highest 90° peel adhesion in this 60xx set at 16 lb/in, with the highest short-term temperature resistance in the set at 464°F and long-term resistance of 320°F.
Key Properties
- 90° Peel Adhesion: 16 lb/in (ASTM D3330)
- Dynamic Shear Strength: 82 lb/in² (ASTM D1002)
- Tensile Strength: 84 lb/in² (ASTM D897)
- Temperature Resistance: -40°F min / 320°F long-term / 464°F short-term
- Carrier / Liner: Uncoated acrylic foam core / Red PE liner
- Total Tape Thickness: 0.047″ ±10%
We want to help!
Enter your information and we'll get you in touch with our knowledgable staff. We know how important to the right product for your project.
Request a Consultation
- Specifications
- Applications
- General Info
- FAQs
Physical Properties
| Property | Value | Test Method |
| Thickness | 0.047″ ±10% | — |
| Color | Gray | — |
| Material / Substrate | Uncoated Acrylic Foam | — |
| Core | Acrylic Adhesive Foam Core | — |
| Adhesive Type | Closed Cell Acrylic | — |
| Adhesive System | Permanent Adhesive | — |
| Adhesive Side | Double Sided Adhesive | — |
| Liner | Red PE liner | — |
| Density | 54 lb/ft³ | — |
| Cell Structure | Closed Cell | — |
Adhesion Properties
| Property | Value | Test Method |
| 90° Peel Adhesion | 16 lb/in | ASTM D3330 |
| Dynamic Shear Strength | 82 lb/in² | ASTM D1002 |
| Tensile Strength | 84 lb/in² | ASTM D897 |
| Static Shear Strength @ 72°F | 1,000 grams* | ASTM 3654 |
| Static Shear Strength @ 150°F | 500 grams* | ASTM 3654 |
| Static Shear Strength @ 200°F | 500 grams* | ASTM 3654 |
*Weight that 1/2 square inch will hold 10,000 minutes (7 days).
Thermal Properties
| Property | Value | Test Method |
| Minimum Temperature Resistance | -40°F | — |
| Short-Term Temperature Resistance | 464°F | — |
| Long-Term Temperature Resistance | 320°F | — |
| Recommended Application Temperature | Minimum 59°F | — |
Environmental Performance
| Property | Value | Test Method |
| UV Resistance | Excellent | — |
| Solvent Resistance | Excellent | — |
Shelf Life / Storage
| Property | Value | Test Method |
| Shelf Life | 18 months | — |
| Recommended Storage Conditions | Store in its original package and in a dry place between 39.2°F and 100.4°F | — |
- Pre-powder coating bonding of stainless steel and galvanized steel assemblies where the tape must survive the highest oven temperatures and chemical pre-treatment baths
- Structural bonding of anodized and raw aluminum components that undergo the full powder coat process, where maximum gap accommodation at the bondline is required
- Metal assembly bonding applications requiring the tape to remain viscoelastic and functional after powder coat process exposure at elevated oven temperatures
- Applications requiring the highest peel adhesion and highest short-term temperature resistance in the 60xx powder coat resistant series
- Bonding of metal components with surface irregularities where the 0.047″ bondline provides additional conformability versus the thinner 60xx grades
Common industries: Metal fabrication, architectural metalwork, industrial equipment manufacturing, powder coating operations.
AFTC 6011 is the thickest grade in the 60xx series of powder coat resistant double-sided acrylic foam tapes at 0.047″, engineered specifically for metal assemblies that are bonded prior to the powder coating process. Unlike standard acrylic foam tapes, the 60xx series is formulated to survive both the extreme temperatures of the powder coat oven and the chemical pre-treatment baths that bonded parts pass through before coating.
After completing the full powder coat process, AFTC 6011 retains its viscoelastic properties — continuing to absorb differential thermal expansion between the two bonded materials and maintaining bond integrity. The acrylic adhesive foam core is closed cell and carries a permanent adhesive system on both faces, protected by a red PE liner.
AFTC 6011 carries the highest short-term temperature resistance in the 60xx set at 464°F — significantly higher than the 428°F rating of 6004 and 6008 — and delivers the highest peel adhesion in the series at 16 lb/in. High inner strength, good shear, and good peel properties are cited as key features on the TDS. The tape exhibits excellent UV resistance and excellent solvent resistance.
Static shear strength is 1,000 grams per 1/2 square inch held for 10,000 minutes (7 days) at 72°F, and 500 grams at 150°F and 200°F. A minimum bond-line pressure of 14.5 psi must be applied in a rolling fashion. Full end-strength is reached within 72 hours; use of H-O Products Primer 33 or Primer 101 reduces this to approximately 20 minutes. Minimum recommended application temperature is 59°F.
What differentiates AFTC 6011 from thinner grades 6004 and 6008 in the 60xx series?
AFTC 6011 is the thickest grade in the 60xx series at 0.047" (±10%) and delivers both the highest peel adhesion (16 lb/in) and the highest short-term temperature resistance (464°F) in the series. Compared to 6008 (0.031", 428°F short-term, 14 lb/in peel) and 6004 (0.015", 428°F short-term, 12 lb/in peel), AFTC 6011 is the preferred choice where the largest bondline gap, highest peel retention, or the most demanding oven temperature exposure is involved.
Why is peel adhesion important for a tape used in powder coating applications?
In powder coating workflows, the tape bond must survive not only the oven heat cycle but also the chemical pre-treatment baths before any topcoat is applied. A tape that loses peel adhesion during this process will allow the bond to delaminate at its edges — potentially before or during coating — leading to assembly failure. AFTC 6011 is formulated to retain its peel adhesion (16 lb/in) and remain viscoelastic through the full powder coat process, including exposure to short-term temperatures up to 464°F, ensuring the bond remains intact from assembly through finished coating.
What is the operating temperature range for AFTC 6011?
AFTC 6011 has a minimum temperature resistance of -40°F, a long-term temperature resistance of 320°F, and a short-term temperature resistance of 464°F, as listed on the TDS.
Is AFTC 6011 suitable for use in powder coating manufacturing processes?
Yes. AFTC 6011 is specifically designed for metal assemblies that are powder coated after bonding. The TDS states it resists the extremely high temperatures of the powder coat oven and the chemical baths used in the powder coating process, and remains viscoelastic after this process. At 464°F short-term, AFTC 6011 carries the highest oven temperature rating in the 60xx series. No additional regulatory compliance standards are stated on the TDS.
How should AFTC 6011 be specified?
Specify grade (AFTC 6011), thickness (0.047"), color (gray), compliance requirements, dimensional tolerances, adhesive side (double), liner type (red PE liner), and finished format.
