AFTC SC06B
AFTC SC06B is a double sided, closed cell acrylic foam tape with a permanent Acrylic Coating 40 adhesive system on both faces, available at 0.025″ thickness. It is designed for structural cladding applications on high and medium surface energy substrates — including plastics, glass, steel, aluminum, and ceramics — and is capable of withstanding wind, temperature extremes, sway, and vibration by addressing both static and dynamic loads through its elastic properties. The tape delivers a 90° peel adhesion of 19 lb/in, a dynamic shear strength of 97 lb/in², and is rated for long-term service up to 212°F and short-term exposure up to 320°F.
Key Properties
- 90° Peel Adhesion: 19 lb/in (ASTM D3330)
- Dynamic Shear Strength: 97 lb/in² (ASTM D1002)
- Tensile Strength: 100 lb/in² (ASTM D897)
- Long-Term Temperature Resistance: 212°F
- Liner / Carrier: Red PE liner; Acrylic Adhesive Foam Core
- Total Tape Thickness: 0.025″ ±15%
We want to help!
Enter your information and we'll get you in touch with our knowledgable staff. We know how important to the right product for your project.
Request a Consultation
- Specifications
- Applications
- General Info
- FAQs
Physical Properties
| Property | Value | Test Method |
| Thickness | 0.025″ ±15% | — |
| Color | Black+ | — |
| Material / Substrate | Coated Acrylic Foam | — |
| Core | Acrylic Adhesive Foam Core | — |
| Adhesive Type | Acrylic Coating 40 | — |
| Adhesive System | Permanent Adhesive | — |
| Adhesive Side | Double Sided Adhesive | — |
| Liner | Red PE liner | — |
| Density | 52 lb/ft³ | — |
| Cell Structure | Closed Cell | — |
+All “Black” tapes have a gray core and black adhesive.
Adhesion Properties
| Property | Value | Test Method |
| 90° Peel Adhesion | 19 lb/in | ASTM D3330 |
| Dynamic Shear Strength | 97 lb/in² | ASTM D1002 |
| Tensile Strength | 100 lb/in² | ASTM D897 |
| Static Shear Strength @ 72°F | 1,000 grams* | ASTM 3654 |
| Static Shear Strength @ 150°F | 500 grams* | ASTM 3654 |
| Static Shear Strength @ 200°F | 500 grams* | ASTM 3654 |
*Weight that 1/2 square inch will hold 10,000 minutes (7 days).
Thermal Properties
| Property | Value | Test Method |
| Minimum Temperature Resistance | -40°F | — |
| Short-Term Temperature Resistance | 320°F | — |
| Long-Term Temperature Resistance | 212°F | — |
| Recommended Application Temperature | Minimum 59°F | — |
Environmental Performance
| Property | Value | Test Method |
| Solvent Resistance | Excellent | — |
| UV Resistance | Excellent | — |
Shelf Life / Storage
| Property | Value | Test Method |
| Shelf Life | 18 months | — |
| Recommended Storage Conditions | Store in its original package and in a dry place between 39.2°F and 100.4°F | — |
- Thin-profile structural bonding of cladding panels to aluminum or steel framing systems where bond-line height is constrained
- Attachment of glass elements in curtain wall or glazing systems subject to wind load and thermal movement
- Bonding of high and medium surface energy plastic cladding components where gap-filling and moisture ingress prevention are required
- Adhesive mounting of ceramic tile or panel systems requiring higher dynamic shear performance than thicker SC-series grades
- Replacement of mechanical fasteners in cladding assemblies where a lower-profile bond line is a design requirement
Common industries: construction, glazing and fenestration, architectural fabrication, signage and display, transportation.
AFTC SC06B is a Structural Cladding Tape — a designation that distinguishes it from general purpose AFTC grades by its specific design for façade and cladding assemblies subject to structural loading. Its elastic construction allows it to absorb shock and deflection from wind, thermal movement, sway, and vibration, addressing both static and dynamic loads simultaneously.
The tape’s ability to fill gaps and voids prevents the ingress of dirt, cleaning chemicals, and moisture, and contributes to clean, consistent joint lines in cladding assemblies. At 0.025″ — thinner than the SC11 grades — SC06B provides a lower-profile bond line while delivering higher dynamic shear (97 lb/in²) and tensile strength (100 lb/in²) than the thicker SC11 grades. Note: all “Black+” tapes have a gray core and black adhesive.
The tape demonstrates excellent resistance to solvents and UV exposure. As a pressure sensitive adhesive, a minimum bond line pressure of 14.5 psi applied by hand roller or mechanical presser is required for full adhesion. For low surface energy substrates, primer use is recommended; the AFTC line requires up to 72 hours to reach end-strength without primer, which is reduced to approximately 20 minutes with a compatible primer. Shelf life is 18 months when stored in original packaging in a dry environment between 39.2°F and 100.4°F.
What differentiates AFTC SC06B from AFTC SC11B, which shares the same adhesive and color?
AFTC SC06B and SC11B are both Black+ Structural Cladding Tapes using Acrylic Coating 40 and targeting the same substrate types. SC06B is 0.025" ±15% thick — approximately half the thickness of SC11B at 0.047" ±10% — providing a lower-profile bond line and higher mechanical values: dynamic shear of 97 lb/in² and tensile strength of 100 lb/in² versus 85 lb/in² for both in SC11B. SC06B's peel adhesion of 19 lb/in is lower than the 23 lb/in of SC11B.
Why is peel adhesion important when selecting an acrylic foam tape for structural cladding?
Peel adhesion — measured here at 19 lb/in per ASTM D3330 — determines how effectively the tape resists being lifted from the cladding substrate under wind uplift, thermal cycling, or mechanical loading. In façade and cladding applications where the bond line must perform over decades of environmental exposure, maintaining adequate peel adhesion is critical to the long-term integrity of the cladding attachment.
What is the operating temperature range for AFTC SC06B?
AFTC SC06B has a minimum temperature resistance of -40°F, a long-term temperature resistance of 212°F, and a short-term temperature resistance of 320°F.
Is AFTC SC06B suitable for outdoor or UV-exposed environments?
The TDS rates AFTC SC06B as having excellent UV resistance and excellent solvent resistance. It is specifically described as capable of withstanding temperature extremes. No specific regulatory compliance standards are listed on the TDS.
How should AFTC SC06B be specified?
Specify grade (AFTC SC06B), thickness (0.025"), color (Black+), liner type (Red PE), dimensional tolerances, and finished format. Note any primer requirements for lower surface energy substrates and confirm minimum application temperature of 59°F can be met at time of installation.
