Orbital Data Centers: Six Materials Questions to Settle Before the Compute Node Flies
Why radiator area turns every thermal interface into a design decision, which gap pads, graphite spreaders, cushions, seals, films and foams carry ASTM E595 outgassing data, and what thermal cycling, launch and EMI do to the shortlist.
G10, Durostone, Mica, Nomex, or PEEK: Choosing Busbar, Transformer, and Motor Insulation
Busbar, transformer, and motor insulation arrives in three mechanical forms, and the form decides the family before the brand does.
NOMEX 410 vs. 411: Choosing Aramid Paper for Motor and Transformer Insulation
NOMEX 410 and 411 are the two aramid papers most motor and transformer designs default to, and they are not interchangeable. 410 is calendered and dense (845 V/mil at 10 mil); 411 is uncalendered, bulky and impregnable (240 V/mil). Here is how to choose, with DuPont's published numbers, plus where 414, NMN and 818 fit.
Galvanic Corrosion at Dissimilar-Metal and Chafe Interfaces: MIL-STD-889 and How an Isolation Strip Breaks the Couple
A wire bundle wearing through its clamp and a carbon-fiber skin bolted to an aluminum fitting share a hidden mechanism.
Data Center Liquid Cooling Gaskets, Seals and TIM: Material Selection by Zone (EPDM, Fluorosilicone, FKM, FFKM)
EPDM vs fluorosilicone vs FKM vs FFKM for data center liquid cooling: which gasket, seal, insulation and TIM materials go on each side of the CDU, with ASHRAE TC 9.9 context and a compatibility table.
Structural, Mounting, and Bedding Tapes: Choosing Fenestration Tape and Gasket Materials
Fenestration tapes and gaskets look like a long catalog, but they sort into a short logic: a few families that bond and bear load, a few that mount and position, a few that bed and seal, and one branch that recovers…
Setting Blocks, Structural Glazing Tape, and Perimeter Gaskets: Choosing Curtain Wall Glazing Materials
A curtain wall glazing pocket holds more decisions than it looks like it does: a block that carries dead load, a tape that fixtures a structural joint, a gasket that seals across years of movement, and a baffle that…
Mullion Plugs, End Dams, and Spandrel Insulation: Choosing Curtain Wall Thermal and Cavity Materials
The parts that fail on a curtain wall are usually the ones nobody photographs: the plug in a mullion cavity, the dam at a gutter end, the break strip on an anchor, the insulation in a spandrel.
Glazing Tape, Setting Blocks, Weatherstrip, and Weep Baffles: Choosing Window and Door Sealing Materials
An operating window or door is not one seal; it is up to nine die-cut sealing, cushioning, and positioning interfaces, and each one answers to a different material family.








