10 PPI Uncoated Reticulated Foam Pads/Baffles
Compressible polyether polyurethane foam with nominal 10 ppi. Weeps moisture while minimizing the infiltration of drafts, water, dust, insects, etc. into a building or a cavity (NEMA enclosure, generator/compressor housing, etc).
Don’t see what you are looking for?
Our engineering team is ready to assist.
Contact Us
Product Features and Benefits:
- Standard (uncoated) reticulated foam is available in charcoal gray
- Flame retardant available by special request
Learn more about choosing the right reticulated polyether foam for your application in our blog.
Typical Applications:
- General filtering applications. Weep baffling in commercial and residential construction. Weeps moisture and condensation from the building while minimizing infiltration of air drafts, moisture, insects, dust, etc.
- Standard (uncoated) reticulated foam is used inside extrusions and cavities where it is not exposed to UV/Sunlight
| Color | Charcoal Gray |
|---|---|
| Density | 1.4 lb/ft3 |
| Test Methods | ASTM D3574-91, ASTM D3574-91, ASTM D3574-91, ASTM D3574-91, CREST, ASTM D3574-91, ASTM D3574-91 |
| Elongation | 1 |
| Compression Deflection @25% | 0.30 psi minimum |
| Cell Structure | Open |
| Porosity | 10 ppi ±5 |
| Tear Strength | 2 lb/in minimum |
| Tensile Strength | 5 lb/in minimum |
| Compression Set 50% | 15% loss maximum |
| Adhesive Type | No Adhesive |
| Adhesive Side | No Adhesive |
| Width (in) | Custom width up to 23" |
| Length (in) | Custom length up to 11" |
| Double Sided Adhesive | No |
| Material / Substrate | Polyether Polyurethane Foam |
| Permanent Adhesive | No |
| Removeable Adhesive | No |
| Single Sided Adhesive | No |
| Compression Deflection 25% (Range) | 0-9.99 psi |
| Compression Set 50 (Range) | 10-19.99% |
| Density (Range) | 0-9.99 lb/ft3 |
| Elongation (Range) | 100-199% |
| Porosity (Range) | 10-19 ppi |
| Tear Strength (Range) | 0-9.99 lb/in |
| Tensile Strength (Range) | 0-249.99 lb/in2 |
Industries
HVAC