80 Durometer Solid PVC with Plasticizer Block Film 1/8" Setting Blocks
Only %1 left
SKU
B-80DSPVCPF1008
Technical Datasheets
80 Durometer Solid PVC with Plasticizer Block Film 1008
Solid polyvinyl chloride (PVC) setting blocks mechanically bonded to a polymeric film barrier on one side, which eliminates plasticizer migration when acrylic pressure sensitive adhesive is applied, helping to maintain a long-term bond to many types of substrates.
Features & Benefits:
• Adhesive has excellent peel and shear values.
• Inexpensive alternative to commercial grade neoprene, rubber and EPDM setting blocks
• Acrylic adhesive gives great high and low temperature and weather resistance
• PVC compound, can be recycled with sash components
• Low/no skid
Typical Applications:
• Livestock trailers (no skid), dock ramps, and aluminum dock vibration damping
• Aluminum dock decking spacer tape
| Test Methods | PSTC-1, ASTM D2240, SYNTAC TM, ASTM D412 |
|---|---|
| Durometer / Hardness (Shore A) | 75 |
| Adhesion / Peel Value | 6.25 lb/in |
| Adhesion Range | 5-9.99 lb/in |
| Cell Structure | Non-Cellular |
| Minimum Temperature Range | -20°F |
| Maximum Temperature Range | 200°F |
| Tensile Strength | 250 lb/in2 |
| Loop Tack | 109 oz/in |
| Adhesive Side | Single Sided |
| Liner | 78# clay coated |
| Material / Substrate | Solid Polyvinyl Chloride (PVC) |
| Durometer Shore A (Range) | 60+ |
| Environmental and Chemical Properties | Acid Resistance, Alcohol Resistance, Aldehydes Resistance, Amines Resistance, Detergent Solutions Resistance, Mineral Oil resistance, Reducing Agents resistance, Resistance to Aliphatic Hydrocarbon Fluids |
| Loop Tack (Range) | 30+ oz/in |
| Tear Strength (Range) | 30+ lb/in |
| Minimum Temperature (Range) | -15 - -29°F |
| Tensile Strength (Range) | 250-499.99 lb/in2 |