AFTC AM9623 Automotive Tape
Color: Black
Thickness: 0.090"
Adhesive: Double Side Permanent Adhesive
Length: 54 ft Roll
Width: Enter custom width requirement below:
Technical Datasheet
AFTC 9623
The AM9623 allows a very good adhesion on a wide variety of automotive applications and especially on LSE substrates (ceramic/silicones).
Don’t see what you are looking for?
Our engineering team is ready to assist.
Contact Us
Product Features and Benefits:
- Very good shear strength, good inner strength, very good long term stability and very good adaptability to the bonding surfaces
- Because of the viscoelastic properties, tensions in the adhesive seam are perfectly removed and allow a very durable bonding
- UV resistant
- Solvent resistant
Typical Applications:
- Various medium and low surface energy plastics
- Silicones
- Teflon
- Powder-coatings
- Clearcoats
- Ceramic car paints
Color | Black |
---|---|
Total Thickness | 0.09 |
Density | 37 lb/ft3 |
Test Methods | ASTM D3330, ASTM D1002, ASTM 3654, ASTM D897 |
Adhesion / Peel Value | 27 lb/in |
Adhesion Range | 25-29.99 lb/in |
Cell Structure | Closed |
Minimum Temperature Range | -40°F |
Maximum Temperature Range | 248°F |
Tensile Strength | 81 lb/in2 |
Shelf Life | 18 months |
Static Shear Strength @250°F Range | 250 grams |
Static Shear Strength @72°F Range | 1000 grams |
Static Shear Strength @ 200°F Range | 500 grams |
Static Shear Strength @ 150°F Range | 500 grams |
Dynamic Shear Strength Range | 97 |
Adhesive Type | Permanent - Acrylic Coating 66 |
Adhesive Side | Double Side |
Width (in) | Custom width up to 33.4646" |
Width (mm) | Custom width up to 850 mm |
Length (mm) | 16.5 m |
Core | Acrylic Adhesive Foam Core |
Double Sided Adhesive | Yes |
Length (ft) | 54.13386' |
Liner | Red PE liner |
Material / Substrate | Coated Acrylic Foam |
Permanent Adhesive | Yes |
Removeable Adhesive | No |
Single Sided Adhesive | No |
Thickness (mm) | 2.3 |
Thickness Tolerance | ±10% |
Density (Range) | 30-39.99 lb/ft3 |
Environmental and Chemical Properties | Solvent Resistance, UV Resistance |
Dynamic Shear Strength (Range) | 80-99 lb/in2 |
Static Shear Strength @72°F (Range) | 1000-1499 grams |
Static Shear Strength @ 150°F (Range) | 500-749 grams |
Static Shear Strength @ 200°F (Range) | 500-749 grams |
Static Shear Strength @250 Grams°F (Range) | 250-499 grams |
Minimum Temperature (Range) | -30 - -49°F |
Tensile Strength (Range) | 0-249.99 lb/in2 |