H-O Mount 1/32" Pads
Closed cell, crosslinked polyethylene foam coated on both sides with a high performance rubber based adhesive with a white kraft liner.
Don’t see what you are looking for?
Our engineering team is ready to assist.
Contact Us
Product Features and Benefits:
- Easily die-cut
- High immediate bond
- Great chemical resistance
- Low compression set
- Good conformability
Typical Applications:
- Plastic extrusion
- Signage
- Wire raceways
- Wire mounts and trim
- Cushioning and vibration dampening
- Mounting applications include mirrors, hardware components, point of purchase displays, mounted toothbrush holders, medallions on trophies, and for replacing fasteners in many applications
| Total Thickness | 1/32" | 0.063 |
|---|---|
| Test Methods | PSTC-101, PSTC-131, ASTM D2979, PSTC-131 |
| Elongation | 355% |
| Adhesion / Peel Value | 7.8125 lb/in |
| Adhesion Range | 5-9.99 lb/in |
| Cell Structure | Closed |
| Minimum Temperature Range | 50°F |
| Maximum Temperature Range | 203°F |
| Tensile Strength | 107 lb/in |
| Loop Tack | 34 oz |
| Adhesive Type | Permanent - Rubber - Rubber |
| Adhesive Side | Double Sided |
| Width (in) | Custom width up to 23" |
| Length (in) | Custom length up to 11" |
| Adhesive Thickness (Exposed Side) | 2.20 mils |
| Adhesive Thickness (Liner Side) | 2.20 mils |
| Carrier Thickness | 31.25 mils |
| Double Sided Adhesive | Yes |
| Liner | White kraft liner |
| Material / Substrate | Crosslinked Polyethylene Foam |
| Permanent Adhesive | Yes |
| Removeable Adhesive | No |
| Single Sided Adhesive | No |
| Environmental and Chemical Properties | Chemical Resistance |
| Elongation (Range) | 300-399% |
| Loop Tack (Range) | 30+ oz/in |
| Minimum Temperature (Range) | ≤ -50°F |
| Tensile Strength (Range) | 0-249.99 lb/in2 |
Industries
Appliance, Automotive, General Construction, Industrial & Electromechanical