H-O Mount 1/32" Tape
Closed cell, crosslinked polyethylene foam coated on both sides with a high performance rubber based adhesive with a white kraft liner.
Don’t see what you are looking for?
Our engineering team is ready to assist.
Contact Us
Product Features and Benefits:
- Easily die-cut
- High immediate bond
- Great chemical resistance
- Low compression set
- Good conformability
Typical Applications:
- Plastic extrusion
- Signage
- Wire raceways
- Wire mounts and trim
- Cushioning and vibration dampening
- Mounting applications include mirrors, hardware components, point of purchase displays, mounted toothbrush holders, medallions on trophies, and for replacing fasteners in many applications
Total Thickness | 1/32" | 0.031 |
---|---|
Test Methods | PSTC-101, PSTC-131, ASTM D2979, PSTC-131 |
Elongation | 355% |
Adhesion / Peel Value | 7.8125 lb/in |
Adhesion Range | 5-9.99 lb/in |
Cell Structure | Closed |
Minimum Temperature Range | 50°F |
Maximum Temperature Range | 203°F |
Tensile Strength | 107 lb/in |
Loop Tack | 34 oz |
Adhesive Type | Permanent - Rubber - Rubber |
Adhesive Side | Double Sided |
Width (in) | Custom width up to 58" |
Adhesive Thickness (Exposed Side) | 2.20 mils |
Adhesive Thickness (Liner Side) | 2.20 mils |
Carrier Thickness | 31.25 mils |
Double Sided Adhesive | Yes |
Liner | White kraft liner |
Material / Substrate | Crosslinked Polyethylene Foam |
Permanent Adhesive | Yes |
Removeable Adhesive | No |
Single Sided Adhesive | No |
Environmental and Chemical Properties | Chemical Resistance |
Elongation (Range) | 300-399% |
Loop Tack (Range) | 30+ oz/in |
Minimum Temperature (Range) | ≤ -50°F |
Tensile Strength (Range) | 0-249.99 lb/in2 |