Polyimide Foam with Rubber Adhesive and Aluminum Foil Pads
Technical Datasheets
Polyimide Foam with Rubber Adhesive and Aluminum Foil Strips
Polyimide is a lightweight, non-wicking, thermal and acoustic insulation foam utilized where low fire, toxicity and smoke generation are critical. The rubber PSA is designed for difficult bonding applications and has excellent quick stick and shear properties for permanent bonding applications on foams, plastics, metals and composite materials subjected to a broad range of temperatures. The aluminum foil has high temperature resistance and exhibits no afterglow or foil rupture exceeding the area of direct flame contact-self extinguishing.
Don’t see what you are looking for?
Our engineering team is ready to assist.
Contact Us
Product Features and Benefits:
- Excellent long-term stability under humid conditions and after temperature cycling
- Formaldehyde free
- Easily die-cut
- Emits virtually no smoke or toxic-by-products when exposed to open flame
- Lightweight yet durable
- Rubber adhesive meets adhesive requirements of GM3622, CHRYSLER MS-CC211 and DELPHI SD2-324
- Aluminum foil meets FMVSS-302 requirements
Typical Applications:
- Aircraft and aerospace applications including aircraft fuselage, under floor, ECS ducts and equipment
- Oven Insulation, vent duct insulation and many more where temperature resistance is critical
- Great for sound dampening
- Excellent acoustic absorption
| Color | Light Yellow |
|---|---|
| Density | 0.44 lb/ft3 |
| Test Methods | PSTC-101, ASTM D3574 , ASTM C518, ASTM D822 |
| Thermal Conductivity | 0.32 btu/(h·ft2·°F) |
| Flammability And Outgassing | FAR 25.856 (a)- (FAA RADIANT PANEL), Flame Retardant, OFFGASSING/OUTGASSING CVCM, OFFGASSING/OUTGASSING TMI |
| Adhesion / Peel Value | 6 lb/in |
| Adhesion Range | 5-9.99 lb/in |
| Cell Structure | Non-Cellular |
| Minimum Temperature Range | -10°F |
| Maximum Temperature Range | 180°F |
| Tensile Strength | 20 lb/in |
| Adhesive Type | Permanent - Rubber (SLM360) - SLM360 |
| Adhesive Side | Single Sided |
| Width (in) | Custom width up to 23" |
| Length (in) | Custom length up to 11" |
| Adhesive Thickness | 1.5 mils |
| Aluminum Foil Thickness | 0.0007" |
| backing/carrier | 60# densified kraft |
| Double Sided Adhesive | No |
| Material / Substrate | Polyimide Foam |
| Permanent Adhesive | Yes |
| Removeable Adhesive | No |
| Single Sided Adhesive | Yes |
| Density (Range) | 0-9.99 lb/ft3 |
| Environmental and Chemical Properties | Cold Weather Flexibility |
| Thermal Conductivity (Range) | .3+ btu/(ft²-hr-F°) |
| Minimum Temperature (Range) | 0 - -14°F |
| Tensile Strength (Range) | 0-249.99 lb/in2 |