AFTC HA7308 Heat Activated Tape
Color: Gray
Thickness: 0.031"
Adhesive: Double Side Permanent Adhesive
Length: 108 ft Roll
Width: Enter custom width requirement below:
Technical Datasheet
AFTC 7308
Heat Activated products are constructed of two different adhesive systems. One side consists of a hotmelt adhesive that is inactive at ambient temperatures. In application to extruded EPDM or TP seals, this adhesive is activated by a heat source. This activated adhesive then melts together with the extruded rubber seal forming a very strong and permanent bond. The other side of the heat activated tape consists of a pressure sensitive adhesive. Here you will typically find the same adhesive system as the one used in the Automotive series.
Don’t see what you are looking for?
Our engineering team is ready to assist.
Contact Us
Product Features and Benefits:
- UV resistant
- Solvent resistant
Typical Applications:
- Glass
- Glass/epoxy
- Stainless steel
- Galvanized steel
- Anodized aluminum
- Coated aluminum
| Color | Gray |
|---|---|
| Total Thickness | 0.031 |
| Density | 52 lb/ft3 |
| Test Methods | ASTM D3330, ASTM D1002, ASTM 3654, ASTM D897 |
| Adhesion / Peel Value | 12 lb/in |
| Adhesion Range | 10-14.99 lb/in |
| Cell Structure | Closed |
| Minimum Temperature Range | -40°F |
| Maximum Temperature Range | 374°F |
| Tensile Strength | 92 lb/in2 |
| Shelf Life | 18 months |
| Static Shear Strength @72°F Range | 1000 grams |
| Static Shear Strength @ 200°F Range | 500 grams |
| Static Shear Strength @ 150°F Range | 500 grams |
| Dynamic Shear Strength Range | 92 |
| Adhesive Type | Permanent - Direct Foam/Hotmelt Film |
| Adhesive Side | Double Side |
| Width (in) | Custom width up to 33.4646" |
| Width (mm) | Custom width up to 850 mm |
| Length (mm) | 33 m |
| Core | Acrylic Adhesive Foam Core |
| Double Sided Adhesive | Yes |
| Length (ft) | 108.268' |
| Liner | Red PE liner |
| Material / Substrate | Uncoated Acrylic Foam |
| Permanent Adhesive | Yes |
| Removeable Adhesive | No |
| Single Sided Adhesive | No |
| Thickness (mm) | 0.8 |
| Thickness Tolerance | ±10% |
| Density (Range) | 50-59.99 lb/ft3 |
| Environmental and Chemical Properties | Solvent Resistance, UV Resistance |
| Dynamic Shear Strength (Range) | 80-99 lb/in2 |
| Static Shear Strength @72°F (Range) | 1000-1499 grams |
| Static Shear Strength @ 150°F (Range) | 500-749 grams |
| Static Shear Strength @ 200°F (Range) | 500-749 grams |
| Minimum Temperature (Range) | -30 - -49°F |
| Tensile Strength (Range) | 0-249.99 lb/in2 |