20 PPI Uncoated Reticulated Foam Strips

MATERIAL/SUBSTRATE:
Polyether Polyurethane Foam
CELL COUNT [CREST]:
20 ppi ±5
CELL STRUCTURE:
Open Cell
VOLUMETRIC AIR FLOW RATE [ASTM D3574-91]:
22 cfm ±3.5
DENSITY [ASTM D3574-91]:
1.4 lb/ft3 ±0.10
COMPRESSION SET @ 50% DEFLECTION [ASTM D3574-91]:
15% loss maximum
COMPRESSION FORCE DEFLECTION @ 25% [ASTM D3574-91]:
0.50 psi ±0.10
TENSILE STRENGTH [ASTM D3574-91]:
18 lb/in minimum

Product Overview

Compressible polyether polyurethane foam with nominal 20 PPI. Weeps moisture while minimizing the infiltration of drafts, water, dust, insects, etc. into a building or a cavity (EMA enclosure, generator/compressor housing, etc.)

Typical Applications:
• General filtering applications. Weep baffling in commercial and residential construction. Weeps moisture and condensation from the building while minimizing infiltration of drafts, moisture, insects, dust, etc.
• Standard (uncoated) reticulated foam is used inside extrusions and cavities where it is not exposed to UV/Sunlight

Product Features & Benefits:
• Standard (uncoated) reticulated foam is available in charcoal gray
• Flame retardant available by special request

ISO 9001:2015 Certification
Certified Thomas Suplier