What is Poly-Seal AF Butyl Tape?

Poly-Seal AF is an aluminum-faced, pressure-sensitive butyl mastic designed for duct joints, roof seams, and exterior sealing.

Where is Poly-Seal AF used?

It is used on HVAC ducts, metal roof seams, flashing joints, and general exterior waterproofing applications.

What makes Poly-Seal AF different?

Its aluminum foil facing provides superior UV, oxidation, and weather resistance for outdoor applications.

Can Poly-Seal AF be customized?

Yes. It can be produced in standard roll widths or precision die-cut shapes for specific applications.

What is Poly-Seal CR Butyl Tape?

Poly-Seal CR is a coating-ready butyl tape for roof seams and duct joints that can be painted or coated after installation.

Where is Poly-Seal CR used?

It’s used on metal roofs, flashing, and HVAC seams that require coating compatibility and aesthetic finishes.

What makes Poly-Seal CR unique?

Its surface accepts coatings while maintaining butyl flexibility and long-term adhesion.

Can it be painted immediately?

Allow the tape to bond to the substrate before applying coatings for best adhesion.

What is Poly-Seal PE-801?

Poly-Seal PE-801 is an HDPE-backed butyl sealant for hip-and-ridge roof sealing and flashing applications.

Where is it typically used?

It’s used in roofing joints, RV roofs, flashing corners, and other areas requiring instant waterproof sealing.

Is Poly-Seal PE-801 solvent-free?

Yes. The composition is free from asphalt and solvents for clean, long-lasting performance.

Can it be installed without primer?

On clean, dry, non-porous surfaces, primer is not required for a durable bond.

What is Poly-Seal SB Butyl Tape?

Poly-Seal SB is a 100% butyl adhesive tape used for bonding, gasketing, and sealing in HVAC and construction.

Common in HVAC joints, metal flanges, and outdoor sealing where durable watertight performance is required.

No. It bonds instantly with hand pressure and requires no curing or heat.

Can it self-heal around fasteners?

Yes. The butyl compound flows to fill gaps and seal around screws for leak-proof joints.

What is Poly-Seal TPO Butyl Tape?

Poly-Seal TPO is a butyl-based seam-sealing tape formulated for TPO and other roofing membranes requiring watertight joints.

Where is it typically used?

It is commonly used on metal roofs, HVAC curbs, skylights, RV roofs, and exterior flashing seams.

Yes. It is UV- and weather-resistant for long-term outdoor exposure.

Does it require heat or curing?

No. It forms an instant, watertight seal with hand pressure.

What is BF-1000 Silicone Foam?

An extra-soft closed-cell silicone foam for low-pressure sealing, vibration damping, and long-term environmental protection.

Where is BF-1000 used?

In lighting, HVAC, aerospace, transportation, and defense applications requiring durable flame-resistant seals.

What distinguishes BF-1000?

Low compression force, outstanding weather resistance, UL 94 V-0/HF-1 rating, and minimal compression set.

Is BF-1000 food-safe?

Yes, it complies with FDA CFR 177.2600 for indirect food contact.

Can BF-1000 have adhesive backing?

Yes, available with silicone or acrylic PSA options.

An ultra-soft, highly compressible closed-cell silicone foam for low-closure-force sealing and cushioning.

Where is BF-2000 used?

Electronics, avionics, HVAC, and aerospace applications needing minimal clamp force and long-term sealing.

How is BF-2000 unique?

Very low compression deflection, excellent UV resistance, and UL 94 V-0 rating.

Can it be die-cut or laminated?

Yes, available in sheets, rolls, and custom die-cut parts.

A medium-firm closed-cell silicone foam for industrial sealing, moisture resistance, and shock absorption.

Where is HT-800 used?

In enclosures, control panels, HVAC gaskets, and equipment requiring durable sealing.

What distinguishes HT-800?

Balanced density, strong resiliency, and UL 94 V-0 flame rating with wide temperature tolerance.

Can HT-800 be ordered as tape?

Yes, it is available as foam tape with various adhesive backings.

A soft closed-cell silicone foam with low closure force and enhanced sealing for electronics and transportation applications.

Where is HT-870 used?

In environmental seals for electronics, HVAC, and aerospace equipment where flame safety is critical.

What makes HT-870 unique?

Low compression deflection, minimal compression set, and UL 94 V-0 / HF-1 flame ratings.

Can HT-870 include adhesive backing?

Yes, high-temperature silicone and acrylic PSA options are available.

A soft silicone sponge providing light weight and durable sealing for outdoor and industrial applications.

Where is RS-870 used?

Outdoor lighting, electronics enclosures, HVAC panels, and vibration control pads.

How does RS-870 perform in heat and weather?

Maintains flexibility and sealing up to 392 degrees F with excellent UV and ozone resistance.

Is RS-870 available with adhesive backing?

Yes, available with pressure-sensitive adhesives and custom die-cut formats.

What is 2368 Conductive Silicone?

A silver-aluminum filled conductive silicone used for EMI/RFI shielding that meets MIL-DTL-83528 Type B.

In military and aerospace enclosures, radar, communications, and panel-to-chassis grounding.

What are its key properties?

Balanced conductivity, corrosion resistance, and high compression-set resistance with >120 dB shielding.

Can 2368 be die-cut or molded?

Yes. It is available as sheets, extrusions, or molded gaskets.

What is 2571 Conductive Silicone?

A high-durometer silver-copper filled conductive silicone for EMI/RFI shielding, meeting MIL-DTL-83528 Type K.

In rigid aerospace enclosures, structural panels, and defense systems requiring high compression stiffness.

What are its conductive properties?

Volume resistivity of 0.0006 Ω·cm and shielding effectiveness >140 dB across wide frequency ranges.

Can it be molded or extruded?

Yes, available in custom shapes, sheets, and extrusions for MIL-spec sealing applications.

What is 2573 Conductive Fluorosilicone?

A silver-copper filled conductive fluorosilicone designed for EMI/RFI shielding in chemical and fuel-exposed environments.

In aerospace and defense enclosures, connectors, and panels exposed to jet fuels and hydraulic fluids.

278 Atlas Bearing™ Neoprene Pads

MATERIAL/SUBSTRATE:

Neoprene (CR)

DUROMETER/HARDNESS (SHORE A) [ASTM D2240]:

TENSILE STRENGTH [ASTM D412]:

2250 min. psi

ELONGATION [ASTM D412]:

300% min.

COMPRESSION SET 22 HOURS @ 212°F [ASTM D395B]:

35% max.

DUROMETER/HARDNESS CHANGE AFTER HEAT AGING 70 HOURS @ 212°F [ASTM D573]:

+15

TENSILE CHANGE AFTER HEAT AGING 70 HOURS @ 212°F [ASTM D573]:

-15% max

ELONGATION CHANGE AFTER HEAT AGING 70 HOURS @ 212°F [ASTM D573]:

-40% max

OZONE 100 PPHM, 20% STRAIN 100 HOURS @ 104°F [ASTM D1149]:

NO CRACKS

Product Overview

278 Atlas Bearing™ Neoprene — Technical Overview & FAQs

Product Overview

278 Atlas Bearing™ Neoprene is a high-performance, structural-grade elastomer developed for bearing pads, vibration isolation, and load transfer systems. Made from polychloroprene (CR), it delivers excellent compression-set resistance, tensile strength, and long-term elasticity, even under continuous pressure and environmental stress.

It’s specifically engineered for bridge bearings, seismic supports, and structural vibration control, providing shock absorption and movement accommodation between beams and supports in both building and transportation infrastructure.

Applications

Bridge and infrastructure bearing pads
Structural and seismic isolation bearings
Industrial machinery and heavy equipment foundations
Precast concrete beam supports and load distribution pads
Rail and tunnel vibration damping

Key Properties

Material: Neoprene (CR)
Hardness: 50 ±5 Shore A (ASTM D2240)
Tensile Strength: ≥ 2250 psi (ASTM D412)
Elongation at Break: ≥ 300% (ASTM D412)
Compression Set (22 h @ 212 °F): ≤ 35% (ASTM D395B)
Hardness Change After Heat Aging (70 h @ 212 °F): +15 points max (ASTM D573)
Tensile Change After Heat Aging: –15% max (ASTM D573)
Elongation Change After Heat Aging: –40% max (ASTM D573)
Ozone Resistance (100 pphm, 20% strain, 100 h @ 104 °F): No cracks (ASTM D1149)
Temperature Range: –20 °F to +220 °F (–29 °C to 104 °C)
Flammability: Self-extinguishing (FMVSS 302)
Compliance: Meets AASHTO M251 & LRFD Bridge Construction Specification, Section 18.2

FAQs

What is 278 Atlas Bearing Neoprene used for?
278 Atlas Bearing Neoprene is designed for bridge and building bearing pads, structural supports, and vibration isolation applications requiring consistent performance under compressive load and environmental exposure.

How is 278 different from other Atlas Bearing neoprenes?
It provides a balance between strength and flexibility, featuring a 50A durometer hardness for structural compliance while maintaining high tensile strength and resistance to permanent set.

Is 278 Atlas Bearing Neoprene weather-resistant?
Yes — it offers excellent ozone, UV, and weathering resistance, ensuring durability in outdoor or long-term exposure conditions.

What standards does this neoprene meet?
It complies with AASHTO M251 for plain and laminated elastomeric bearing pads and LRFD Section 18.2 for bridge construction.

Can it be customized or cut to size?
Yes — H-O Products can fabricate custom pads, gaskets, or strips from 278 Atlas Bearing Neoprene to meet specific structural requirements.

Reach out to H-O Products for 278 Atlas Bearing™ Neoprene samples, technical data sheets, or engineered pad fabrication to meet your bridge, building, or vibration-isolation specifications - contact us.