What is Poly-Seal AF Butyl Tape?

Poly-Seal AF is an aluminum-faced, pressure-sensitive butyl mastic designed for duct joints, roof seams, and exterior sealing.

Where is Poly-Seal AF used?

It is used on HVAC ducts, metal roof seams, flashing joints, and general exterior waterproofing applications.

What makes Poly-Seal AF different?

Its aluminum foil facing provides superior UV, oxidation, and weather resistance for outdoor applications.

Can Poly-Seal AF be customized?

Yes. It can be produced in standard roll widths or precision die-cut shapes for specific applications.

What is Poly-Seal CR Butyl Tape?

Poly-Seal CR is a coating-ready butyl tape for roof seams and duct joints that can be painted or coated after installation.

Where is Poly-Seal CR used?

It’s used on metal roofs, flashing, and HVAC seams that require coating compatibility and aesthetic finishes.

What makes Poly-Seal CR unique?

Its surface accepts coatings while maintaining butyl flexibility and long-term adhesion.

Can it be painted immediately?

Allow the tape to bond to the substrate before applying coatings for best adhesion.

What is Poly-Seal PE-801?

Poly-Seal PE-801 is an HDPE-backed butyl sealant for hip-and-ridge roof sealing and flashing applications.

Where is it typically used?

It’s used in roofing joints, RV roofs, flashing corners, and other areas requiring instant waterproof sealing.

Is Poly-Seal PE-801 solvent-free?

Yes. The composition is free from asphalt and solvents for clean, long-lasting performance.

Can it be installed without primer?

On clean, dry, non-porous surfaces, primer is not required for a durable bond.

What is Poly-Seal SB Butyl Tape?

Poly-Seal SB is a 100% butyl adhesive tape used for bonding, gasketing, and sealing in HVAC and construction.

Common in HVAC joints, metal flanges, and outdoor sealing where durable watertight performance is required.

No. It bonds instantly with hand pressure and requires no curing or heat.

Can it self-heal around fasteners?

Yes. The butyl compound flows to fill gaps and seal around screws for leak-proof joints.

What is Poly-Seal TPO Butyl Tape?

Poly-Seal TPO is a butyl-based seam-sealing tape formulated for TPO and other roofing membranes requiring watertight joints.

Where is it typically used?

It is commonly used on metal roofs, HVAC curbs, skylights, RV roofs, and exterior flashing seams.

Yes. It is UV- and weather-resistant for long-term outdoor exposure.

Does it require heat or curing?

No. It forms an instant, watertight seal with hand pressure.

What is BF-1000 Silicone Foam?

An extra-soft closed-cell silicone foam for low-pressure sealing, vibration damping, and long-term environmental protection.

Where is BF-1000 used?

In lighting, HVAC, aerospace, transportation, and defense applications requiring durable flame-resistant seals.

What distinguishes BF-1000?

Low compression force, outstanding weather resistance, UL 94 V-0/HF-1 rating, and minimal compression set.

Is BF-1000 food-safe?

Yes, it complies with FDA CFR 177.2600 for indirect food contact.

Can BF-1000 have adhesive backing?

Yes, available with silicone or acrylic PSA options.

An ultra-soft, highly compressible closed-cell silicone foam for low-closure-force sealing and cushioning.

Where is BF-2000 used?

Electronics, avionics, HVAC, and aerospace applications needing minimal clamp force and long-term sealing.

How is BF-2000 unique?

Very low compression deflection, excellent UV resistance, and UL 94 V-0 rating.

Can it be die-cut or laminated?

Yes, available in sheets, rolls, and custom die-cut parts.

A medium-firm closed-cell silicone foam for industrial sealing, moisture resistance, and shock absorption.

Where is HT-800 used?

In enclosures, control panels, HVAC gaskets, and equipment requiring durable sealing.

What distinguishes HT-800?

Balanced density, strong resiliency, and UL 94 V-0 flame rating with wide temperature tolerance.

Can HT-800 be ordered as tape?

Yes, it is available as foam tape with various adhesive backings.

A soft closed-cell silicone foam with low closure force and enhanced sealing for electronics and transportation applications.

Where is HT-870 used?

In environmental seals for electronics, HVAC, and aerospace equipment where flame safety is critical.

What makes HT-870 unique?

Low compression deflection, minimal compression set, and UL 94 V-0 / HF-1 flame ratings.

Can HT-870 include adhesive backing?

Yes, high-temperature silicone and acrylic PSA options are available.

A soft silicone sponge providing light weight and durable sealing for outdoor and industrial applications.

Where is RS-870 used?

Outdoor lighting, electronics enclosures, HVAC panels, and vibration control pads.

How does RS-870 perform in heat and weather?

Maintains flexibility and sealing up to 392 degrees F with excellent UV and ozone resistance.

Is RS-870 available with adhesive backing?

Yes, available with pressure-sensitive adhesives and custom die-cut formats.

What is 2368 Conductive Silicone?

A silver-aluminum filled conductive silicone used for EMI/RFI shielding that meets MIL-DTL-83528 Type B.

In military and aerospace enclosures, radar, communications, and panel-to-chassis grounding.

What are its key properties?

Balanced conductivity, corrosion resistance, and high compression-set resistance with >120 dB shielding.

Can 2368 be die-cut or molded?

Yes. It is available as sheets, extrusions, or molded gaskets.

What is 2571 Conductive Silicone?

A high-durometer silver-copper filled conductive silicone for EMI/RFI shielding, meeting MIL-DTL-83528 Type K.

In rigid aerospace enclosures, structural panels, and defense systems requiring high compression stiffness.

What are its conductive properties?

Volume resistivity of 0.0006 Ω·cm and shielding effectiveness >140 dB across wide frequency ranges.

Can it be molded or extruded?

Yes, available in custom shapes, sheets, and extrusions for MIL-spec sealing applications.

What is 2573 Conductive Fluorosilicone?

A silver-copper filled conductive fluorosilicone designed for EMI/RFI shielding in chemical and fuel-exposed environments.

In aerospace and defense enclosures, connectors, and panels exposed to jet fuels and hydraulic fluids.

AFTC 5333 General Purpose Tape

Functional Equivalent to 3M 4930

MATERIAL/SUBSTRATE:

Coated Acrylic Foam

CORE:

Acrylic Adhesive Foam Core

LINER:

Red PE Liner

DENSITY:

54 lb/ft3

MINIMUM TEMPERATURE RESISTANCE:

-40°F

SHORT-TERM TEMPERATURE RESISTANCE:

350°F

LONG-TERM TEMPERATURE RESISTANCE:

212°F

90° PEEL ADHESION [ASTM D3330]:

19 lb/in

DYNAMIC SHEAR STRENGTH [ASTM D1002]:

96 lb/in2

TENSILE STRENGTH [ASTM D897]:

100 lb/in2

STATIC SHEAR STRENGTH @ 72°F:

1,000 grams

STATIC SHEAR STRENGTH @ 150°F:

500 grams

STATIC SHEAR STRENGTH @ 200°F:

500 grams

CELL STRUCTURE:

Closed Cell

SOLVENT RESISTANCE:

Excellent

UV RESISTANCE:

Excellent

Product Overview

AFTC 5333 General Purpose Tape — Technical Overview & FAQs

Product Overview

AFTC 5333 General Purpose Tape is a high-performance acrylic foam bonding tape engineered for structural-level adhesion across a wide range of industrial, automotive, architectural, and manufacturing applications.
With its reinforced viscoelastic acrylic foam core, the 5333 series provides exceptional bond strength, stress distribution, vibration damping, and long-term durability, making it an excellent replacement for mechanical fasteners, welds, rivets, and liquid adhesives.

AFTC 5333 is designed to bond strongly to metals, plastics, composites, glass, and painted surfaces, and performs reliably in both indoor and outdoor conditions, even under temperature cycling, UV exposure, and moisture.

Applications

Structural bonding for panels, trims, and assemblies
Automotive interior/exterior attachment
Metal-to-plastic bonding
Appliance, HVAC, and equipment assembly
Signage, displays, and architectural components
Bonding dissimilar materials
Replacement for mechanical fasteners in OEM manufacturing

Key Properties

Material Type: High-bond acrylic foam tape
Adhesive System: Reinforced acrylic adhesive for multi-surface bonding
Core Technology: Viscoelastic foam absorbs impact and distributes stress
Adhesion Strength: Excellent adhesion to painted metals, plastics, and composites
Shear Strength: High — supports static and dynamic loads
Peel Resistance: Strong, durable peel adhesion for long-term reliability
Temperature Resistance: Maintains bonding strength across wide temperature ranges
Environmental Resistance: UV-, moisture-, and weather-resistant
Durability: Long-term performance for indoor and outdoor applications

Convertibility: Easily die-cut for precision manufacturing in OEM environments

FAQs

What is AFTC 5333 General Purpose Tape used for?

AFTC 5333 is used for structural bonding, including metals, plastics, composites, signage, automotive components, and industrial panel attachment.

What makes AFTC 5333 different from other general-purpose tapes?

The 5333 series offers:

Higher shear and peel strength

Enhanced viscoelastic stress relaxation

Stronger adhesion to painted surfaces

Superior environmental durability

Can AFTC 5333 be used outdoors?

Yes. AFTC 5333 is engineered to resist:

UV radiation

Moisture

Temperature cycling

Weather exposure

Making it suitable for long-term outdoor use.

Is AFTC 5333 compatible with plastics or composites?

Yes — it bonds well to most medium- and high-surface-energy plastics and composite materials. For difficult substrates, a primer may improve adhesion.

Can AFTC 5333 be die-cut into custom shapes?

Absolutely. H-O Products supplies custom die-cut AFTC 5333 components for automotive, industrial, and OEM production.

Contact H-O Products today for AFTC 5333 General Purpose Tape rolls, custom die-cut components, or engineering support for demanding bonding applications - contact us.