Polyimide Foam Strips with Rubber Adhesive and Aluminum Foil

DENSITY [ASTM D3574 (TEST A), ISO 845]:
0.44 lb/ft3
PEEL ADHESION [PSTC-101]:
96 oz/inch
SMOKE DEVELOPED INDEX FLAMING & NON-FLAMING MODES [ASTM E662]:
<5
NOISE REDUCTION COEFFICIENT (NRC), 1 IN [ASTM E795, MOUNTING A]:
0.75
THERMAL CONDUCTIVITY @ 75°F [ASTM C518]:
0.32 btu/(h·ft2·°F)
TENSILE STRENGTH [ASTM D822]:
20 lb/in
OFFGASSING/OUTGASSING TMI [ASTM E595]:
< 1.0 %
OFFGASING/OUTGASSING CVCM [ASTM E595]:
< 0.1 %
MULLEN BURSTING STRENGTH [ASTM D774]:
40 psi minimum
NOISE REDUCTION COEFFICIENT (NRC), 1 IN [ASTM C423]:
0.75

Product Overview

Polyimide is a lightweight, non-wicking, thermal and acoustic insulation foam utilized where low fire, toxicity and smoke generation are critical. The rubber PSA is designed for difficult bonding applications and has excellent quick stick and shear properties for permanent bonding applications on foams, plastics, metals and composite materials subjected to a broad range of temperatures. The aluminum foil has high temperature resistance and exhibits no afterglow or foil rupture exceeding the area of direct flame contact-self extinguishing.

Typical Applications:
• Aircraft and aerospace applications including aircraft fuselage, under floor, ECS ducts and equipment
• Oven Insulation, vent duct insulation and many more where temperature resistance is critical
• Great for sound damping
• Excellent acoustic absorption

Product Features & Benefits:
• Excellent long-term stability under humid conditions and after temperature cycling
• Formaldehyde free
• Easily die-cut
• Emits virtually no smoke or toxic-by-products when exposed to open flame
• Lightweight yet durable
• Rubber adhesive meets adhesive requirements of GM3622, CHRYSLER MS-CC211 and DELPHI SD2-324
• Aluminum foil meets FMVSS-302 requirements

ISO 9001:2015 Certification
Certified Thomas Suplier